Load data for .223 Rem. + .224 | 50gr | Lapua Naturalis

.223 Rem. cartridge drawing
Lapua logo

Load Specifications

Bullet Manufacturer:Lapua
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.759"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:55,000 psi
Recommended Twist Rate:1:11.5

Load data in caliber .223 Rem. with .224 | 50gr | Lapua Naturalis bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Alliant Reloder-10x and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%48,733 psi89%3143 fps99.2%
Accurate 2015ᴾ<<locked>>100%47,427 psi86%3202 fps98.4%
Accurate 2495ᴾ<<locked>>100%36,477 psi66%3045 fps96.4%
Accurate LT-30<<locked>>92%49,124 psi89%3140 fps97.4%
ADI AR 2207<<locked>>90%47,616 psi87%3215 fps100%
ADI AR 2219<<locked>>94%49,400 psi90%3284 fps97.3%
Alliant AR-Compᴾ<<locked>>100%43,845 psi80%3232 fps99.6%
Alliant Reloder-10x<<locked>>96%48,573 psi88%3258 fps99.3%
Alliant Reloder-7<<locked>>88%47,210 psi86%3169 fps99.4%
Baschieri & Pellagri 106<<locked>>92%47,355 psi86%3114 fps97.4%
Hodgdon H322<<locked>>96%47,601 psi87%3251 fps96.9%
Hodgdon H335<<locked>>96%48,994 psi89%3264 fps96.1%
Hodgdon H4198<<locked>>88%47,790 psi87%3140 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%31,502 psi57%2054 fps100%
IMR 3031ᴾ<<locked>>100%41,800 psi76%3189 fps96.3%
IMR 4198<<locked>>96%49,603 psi90%3235 fps99.8%
IMR 4227<<locked>>84%47,659 psi87%3140 fps100%
Lovex S053<<locked>>86%49,603 psi90%3150 fps100%
Norma 200<<locked>>92%48,791 psi89%3241 fps99.7%
ReloadSwiss RS 36<<locked>>84%47,369 psi86%3169 fps100%
SNPE Vectan BA6 1/2<<locked>>88%47,587 psi87%2953 fps100%
SNPE Vectan SP 3<<locked>>96%48,994 psi89%3251 fps98%
Somchem S335ᴾ<<locked>>100%45,063 psi82%3110 fps96.2%
Vihtavuori N120<<locked>>90%47,674 psi87%3166 fps100%
Vihtavuori N130<<locked>>98%49,269 psi90%3196 fps99.2%
Vihtavuori N133ᴾ<<locked>>100%45,556 psi83%3127 fps97.9%
Vihtavuori N135ᴾ<<locked>>100%37,840 psi69%3058 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,958 psi73%2969 fps97.8%
Accurate 2015<<locked>>90%34,824 psi63%2933 fps95.2%
Accurate 2495<<locked>>98%34,098 psi62%2986 fps95.5%
Accurate LT-30<<locked>>86%40,785 psi74%2976 fps95.3%
ADI AR 2207<<locked>>80%35,317 psi64%2963 fps99.5%
ADI AR 221923.5 gr90%43,540 psi79%3166 fps95.8%
Alliant AR-Comp<<locked>>86%28,616 psi52%2825 fps95%
Alliant Reloder-10x19.5 gr82%31,386 psi57%2867 fps95.1%
Alliant Reloder-7<<locked>>80%36,782 psi67%2946 fps97.5%
Baschieri & Pellagri 106<<locked>>86%39,247 psi71%2949 fps95.3%
Hodgdon H32223.2 gr92%41,945 psi76%3133 fps95.4%
Hodgdon H335<<locked>>94%46,108 psi84%3209 fps95.4%
Hodgdon H4198<<locked>>86%44,860 psi82%3081 fps95.7%
Hodgdon TrailBoss<<locked>>80%23,250 psi42%1844 fps100%
IMR 3031<<locked>>98%39,305 psi71%3130 fps95.5%
IMR 4198<<locked>>80%31,531 psi57%2822 fps96.1%
IMR 4227<<locked>>80%42,409 psi77%3038 fps99.7%
Lovex S053<<locked>>80%41,597 psi76%3005 fps100%
Norma 200<<locked>>80%33,968 psi62%2920 fps97%
ReloadSwiss RS 36<<locked>>80%41,756 psi76%3058 fps99.6%
SNPE Vectan BA6 1/2<<locked>>80%38,827 psi71%2805 fps100%
SNPE Vectan SP 3<<locked>>88%38,450 psi70%3028 fps95.3%
Somchem S335<<locked>>98%42,366 psi77%3058 fps95.4%
Vihtavuori N120<<locked>>80%35,476 psi65%2927 fps99.9%
Vihtavuori N130<<locked>>84%32,619 psi59%2835 fps95.3%
Vihtavuori N133<<locked>>92%35,969 psi65%2920 fps95.3%
Vihtavuori N135<<locked>>98%35,563 psi65%3002 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .223 Rem. loaded with the .224 | 50gr | Lapua Naturalis. ADI AR 2219 delivers the highest muzzle velocity at 3,284 fps; across all powders the maximum-charge window runs from 2,054 fps to 3,284 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (379 MPa), the top charges use 57–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Alliant Reloder-10x, ADI AR 2219 rank at the top here: for .223 Rem. with the .224 | 50gr | Lapua Naturalis they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data