Load data for .223 Rem. + .224 | 50gr | Impala RNFP KO

.223 Rem. cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.759"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:55,000 psi
Recommended Twist Rate:1:10.5

Load data in caliber .223 Rem. with .224 | 50gr | Impala RNFP KO bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, ADI AR 2219 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%49,124 psi89%3140 fps99.2%
Accurate 2015ᴾ<<locked>>100%48,834 psi89%3212 fps98.5%
Accurate 2495ᴾ<<locked>>100%38,305 psi70%3071 fps96.8%
Accurate LT-30<<locked>>90%46,978 psi85%3091 fps96.8%
ADI AR 2207<<locked>>90%48,733 psi89%3222 fps100%
ADI AR 2219<<locked>>92%47,485 psi86%3235 fps96.7%
Alliant AR-Compᴾ<<locked>>100%44,962 psi82%3241 fps99.7%
Alliant Reloder-10x<<locked>>94%46,760 psi85%3212 fps99.1%
Alliant Reloder-7<<locked>>88%48,399 psi88%3176 fps99.5%
Baschieri & Pellagri 106<<locked>>92%48,457 psi88%3120 fps97.5%
Hodgdon H322<<locked>>96%48,718 psi89%3258 fps97%
Hodgdon H4198<<locked>>88%48,617 psi88%3143 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%31,807 psi58%2047 fps100%
IMR 3031ᴾ<<locked>>100%42,989 psi78%3202 fps96.5%
IMR 4198<<locked>>94%47,950 psi87%3196 fps99.6%
IMR 4227<<locked>>84%48,370 psi88%3140 fps100%
Lovex S053<<locked>>84%47,514 psi86%3097 fps100%
Norma 200<<locked>>90%47,369 psi86%3199 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%31,923 psi58%2100 fps100%
ReloadSwiss RS 36<<locked>>84%48,269 psi88%3173 fps100%
Rottweil R 901ᴾ<<locked>>100%49,139 psi89%3219 fps95.7%
SNPE Vectan BA6 1/2<<locked>>88%48,863 psi89%2959 fps100%
SNPE Vectan SP 3<<locked>>94%46,920 psi85%3199 fps97.5%
Somchem S335ᴾ<<locked>>100%46,412 psi84%3123 fps96.3%
Vihtavuori N120<<locked>>90%48,718 psi89%3169 fps100%
Vihtavuori N130<<locked>>96%47,442 psi86%3146 fps98.9%
Vihtavuori N133ᴾ<<locked>>100%46,093 psi84%3123 fps97.9%
Vihtavuori N135ᴾ<<locked>>100%38,653 psi70%3061 fps96.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%40,930 psi74%2976 fps97.9%
Accurate 2015<<locked>>90%36,172 psi66%2949 fps95.5%
Accurate 2495<<locked>>96%33,634 psi61%2956 fps95.2%
Accurate LT-30<<locked>>86%41,684 psi76%2979 fps95.4%
ADI AR 220718.7 gr80%36,390 psi66%2972 fps99.6%
ADI AR 221922.7 gr88%41,510 psi75%3107 fps95%
Alliant AR-Comp<<locked>>86%29,718 psi54%2844 fps95.5%
Alliant Reloder-10x<<locked>>82%32,503 psi59%2881 fps95.5%
Alliant Reloder-7<<locked>>80%38,348 psi70%2966 fps97.8%
Baschieri & Pellagri 106<<locked>>86%39,842 psi72%2949 fps95.3%
Hodgdon H32223 gr92%43,018 psi78%3140 fps95.5%
Hodgdon H4198<<locked>>84%42,989 psi78%3028 fps95%
Hodgdon TrailBoss<<locked>>80%23,540 psi43%1837 fps100%
IMR 3031<<locked>>98%40,451 psi74%3143 fps95.7%
IMR 4198<<locked>>80%32,314 psi59%2828 fps96.3%
IMR 4227<<locked>>80%43,134 psi78%3038 fps99.7%
Lovex S053<<locked>>80%42,453 psi77%3005 fps100%
Norma 200<<locked>>80%35,418 psi64%2940 fps97.3%
ReloadSwiss RS 14<<locked>>80%23,757 psi43%1890 fps100%
ReloadSwiss RS 36<<locked>>80%43,221 psi79%3074 fps99.7%
Rottweil R 901<<locked>>98%46,296 psi84%3163 fps95%
SNPE Vectan BA6 1/2<<locked>>80%39,552 psi72%2802 fps100%
SNPE Vectan SP 3<<locked>>88%39,421 psi72%3038 fps95.5%
Somchem S335<<locked>>98%43,729 psi80%3071 fps95.7%
Vihtavuori N120<<locked>>80%36,448 psi66%2933 fps99.9%
Vihtavuori N130<<locked>>84%33,707 psi61%2844 fps95.6%
Vihtavuori N133<<locked>>92%36,985 psi67%2930 fps95.5%
Vihtavuori N135<<locked>>96%34,621 psi63%2959 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for .223 Rem. loaded with the .224 | 50gr | Impala RNFP KO. Hodgdon H322 delivers the highest muzzle velocity at 3,258 fps; across all powders the maximum-charge window runs from 2,047 fps to 3,258 fps. Accurate 2015 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (379 MPa), the top charges use 58–89 %, leaving at least 11 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, ADI AR 2219, ADI AR 2207 rank at the top here: for .223 Rem. with the .224 | 50gr | Impala RNFP KO they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data