Load data for .223 Rem. + .224 | 50gr | IBEX TRD

.223 Rem. cartridge drawing
IBEX logo

Load Specifications

Bullet Manufacturer:IBEX
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.759"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:55,000 psi
Recommended Twist Rate:1:10.5

Load data in caliber .223 Rem. with .224 | 50gr | IBEX TRD bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Alliant Reloder-10x and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%49,356 psi90%3140 fps99.2%
Accurate 2015ᴾ<<locked>>100%48,965 psi89%3215 fps98.6%
Accurate 2495ᴾ<<locked>>100%37,985 psi69%3064 fps96.7%
Accurate LT-30<<locked>>92%49,588 psi90%3136 fps97.3%
ADI AR 2207<<locked>>90%48,878 psi89%3225 fps100%
ADI AR 2219<<locked>>92%47,065 psi86%3225 fps96.6%
Alliant AR-Compᴾ<<locked>>100%44,614 psi81%3232 fps99.7%
Alliant Reloder-10x<<locked>>96%49,356 psi90%3261 fps99.4%
Alliant Reloder-7<<locked>>88%47,892 psi87%3166 fps99.4%
Baschieri & Pellagri 106<<locked>>92%48,022 psi87%3114 fps97.4%
Hodgdon H322<<locked>>96%48,298 psi88%3248 fps96.9%
Hodgdon H4198<<locked>>88%48,182 psi88%3133 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%31,894 psi58%2051 fps100%
IMR 3031ᴾ<<locked>>100%42,656 psi78%3192 fps96.4%
IMR 4198<<locked>>94%47,630 psi87%3186 fps99.6%
IMR 4227<<locked>>84%48,544 psi88%3143 fps100%
Lovex S053<<locked>>84%47,558 psi86%3100 fps100%
Norma 200<<locked>>90%47,572 psi86%3202 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%31,995 psi58%2100 fps100%
ReloadSwiss RS 36<<locked>>84%48,399 psi88%3173 fps100%
SNPE Vectan BA6 1/2<<locked>>88%48,457 psi88%2953 fps100%
SNPE Vectan SP 3<<locked>>94%47,065 psi86%3202 fps97.5%
Somchem S335ᴾ<<locked>>100%46,006 psi84%3114 fps96.2%
Vihtavuori N120<<locked>>90%48,921 psi89%3173 fps100%
Vihtavuori N130<<locked>>96%47,659 psi87%3153 fps99%
Vihtavuori N133ᴾ<<locked>>100%46,325 psi84%3127 fps98%
Vihtavuori N135ᴾ<<locked>>100%38,754 psi70%3064 fps96.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%40,611 psi74%2969 fps97.8%
Accurate 2015<<locked>>90%36,332 psi66%2953 fps95.6%
Accurate 2495<<locked>>96%33,315 psi61%2946 fps95%
Accurate LT-30<<locked>>86%41,858 psi76%2982 fps95.5%
ADI AR 220718.7 gr80%36,448 psi66%2972 fps99.6%
ADI AR 2219<<locked>>88%41,597 psi76%3107 fps95%
Alliant AR-Comp<<locked>>86%29,834 psi54%2848 fps95.5%
Alliant Reloder-10x19.3 gr82%32,619 psi59%2884 fps95.5%
Alliant Reloder-7<<locked>>80%38,029 psi69%2956 fps97.7%
Baschieri & Pellagri 106<<locked>>86%39,900 psi73%2949 fps95.4%
Hodgdon H32222.9 gr92%42,627 psi78%3130 fps95.4%
Hodgdon H4198<<locked>>84%43,149 psi78%3031 fps95.1%
Hodgdon TrailBoss<<locked>>80%23,598 psi43%1837 fps100%
IMR 3031<<locked>>98%40,132 psi73%3133 fps95.6%
IMR 4198<<locked>>80%32,430 psi59%2831 fps96.3%
IMR 4227<<locked>>80%43,279 psi79%3041 fps99.7%
Lovex S053<<locked>>80%42,554 psi77%3005 fps100%
Norma 200<<locked>>80%35,056 psi64%2927 fps97.2%
ReloadSwiss RS 14<<locked>>80%23,815 psi43%1890 fps100%
ReloadSwiss RS 36<<locked>>80%42,801 psi78%3064 fps99.6%
SNPE Vectan BA6 1/2<<locked>>80%39,682 psi72%2805 fps100%
SNPE Vectan SP 3<<locked>>88%39,479 psi72%3038 fps95.5%
Somchem S335<<locked>>98%43,323 psi79%3061 fps95.5%
Vihtavuori N120<<locked>>80%36,492 psi66%2933 fps99.9%
Vihtavuori N130<<locked>>84%33,388 psi61%2838 fps95.5%
Vihtavuori N133<<locked>>92%36,651 psi67%2920 fps95.4%
Vihtavuori N135<<locked>>96%34,780 psi63%2963 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .223 Rem. loaded with the .224 | 50gr | IBEX TRD. Alliant Reloder-10x delivers the highest muzzle velocity at 3,261 fps; across all powders the maximum-charge window runs from 2,051 fps to 3,261 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (379 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Alliant Reloder-10x, ADI AR 2207 rank at the top here: for .223 Rem. with the .224 | 50gr | IBEX TRD they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data