Load data for .223 Rem. + .224 | 50gr | Barnes VLC S

.223 Rem. cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.759"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:55,000 psi
Recommended Twist Rate:1:11.5

Load data in caliber .223 Rem. with .224 | 50gr | Barnes VLC S bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Hodgdon H322 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%47,007 psi85%3127 fps99.1%
Accurate 2015ᴾ<<locked>>100%45,818 psi83%3189 fps98.2%
Accurate LT-30<<locked>>92%47,514 psi86%3127 fps97.1%
ADI AR 2207<<locked>>92%49,647 psi90%3264 fps100%
ADI AR 2219<<locked>>94%48,254 psi88%3274 fps97.1%
Alliant AR-Compᴾ<<locked>>100%42,496 psi77%3219 fps99.6%
Alliant Reloder-10x<<locked>>98%49,676 psi90%3294 fps99.5%
Alliant Reloder-7<<locked>>90%48,283 psi88%3202 fps99.6%
Baschieri & Pellagri 106<<locked>>94%49,182 psi89%3159 fps97.9%
Hodgdon H322<<locked>>98%49,516 psi90%3301 fps97.4%
Hodgdon H335<<locked>>96%47,732 psi87%3255 fps96%
Hodgdon H4198<<locked>>90%49,371 psi90%3182 fps96.9%
Hodgdon TrailBossᴾ<<locked>>100%31,125 psi57%2060 fps100%
IMR 3031ᴾ<<locked>>100%40,538 psi74%3176 fps96.1%
IMR 4198<<locked>>96%48,675 psi88%3235 fps99.8%
IMR 4227<<locked>>86%49,429 psi90%3186 fps100%
Lovex S053<<locked>>86%47,993 psi87%3136 fps100%
Norma 200<<locked>>92%47,021 psi85%3228 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,472 psi55%2096 fps100%
ReloadSwiss RS 36<<locked>>86%49,342 psi90%3215 fps100%
SNPE Vectan BA6 1/2<<locked>>90%49,153 psi89%2992 fps100%
SNPE Vectan SP 10<<locked>>94%48,443 psi88%3268 fps96.1%
SNPE Vectan SP 3<<locked>>96%47,834 psi87%3241 fps97.9%
Somchem S335ᴾ<<locked>>100%43,613 psi79%3097 fps95.9%
Vihtavuori N120<<locked>>92%49,676 psi90%3212 fps100%
Vihtavuori N130<<locked>>98%48,066 psi87%3186 fps99.2%
Vihtavuori N133ᴾ<<locked>>100%43,787 psi80%3107 fps97.7%
Vihtavuori N135ᴾ<<locked>>100%36,013 psi65%3028 fps96%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%38,406 psi70%2953 fps97.5%
Accurate 2015<<locked>>92%35,578 psi65%2969 fps95.6%
Accurate LT-30<<locked>>86%39,842 psi72%2969 fps95.1%
ADI AR 2207<<locked>>80%33,649 psi61%2940 fps99.3%
ADI AR 221923.6 gr90%41,858 psi76%3143 fps95.5%
Alliant AR-Comp<<locked>>88%28,776 psi52%2848 fps95.3%
Alliant Reloder-10x20.2 gr84%32,111 psi58%2907 fps95.6%
Alliant Reloder-7<<locked>>80%35,520 psi65%2933 fps97.3%
Baschieri & Pellagri 106<<locked>>86%37,797 psi69%2930 fps95%
Hodgdon H32223.4 gr92%40,828 psi74%3120 fps95.1%
Hodgdon H335<<locked>>94%44,208 psi80%3186 fps95%
Hodgdon H4198<<locked>>86%44,005 psi80%3077 fps95.6%
Hodgdon TrailBoss<<locked>>80%22,872 psi42%1850 fps100%
IMR 3031<<locked>>98%37,971 psi69%3110 fps95.1%
IMR 4198<<locked>>80%30,255 psi55%2802 fps95.7%
IMR 4227<<locked>>80%41,075 psi75%3025 fps99.6%
Lovex S053<<locked>>80%40,045 psi73%2989 fps100%
Norma 200<<locked>>80%31,836 psi58%2884 fps96.4%
ReloadSwiss RS 14<<locked>>80%22,495 psi41%1890 fps100%
ReloadSwiss RS 36<<locked>>80%40,698 psi74%3051 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%37,478 psi68%2792 fps100%
SNPE Vectan SP 10<<locked>>92%45,455 psi83%3209 fps95.3%
SNPE Vectan SP 3<<locked>>88%37,289 psi68%3018 fps95.1%
Somchem S335<<locked>>98%40,886 psi74%3041 fps95.1%
Vihtavuori N120<<locked>>80%33,852 psi62%2904 fps99.8%
Vihtavuori N130<<locked>>86%33,083 psi60%2864 fps95.7%
Vihtavuori N133<<locked>>94%36,637 psi67%2953 fps95.7%
Vihtavuori N135<<locked>>98%34,171 psi62%2979 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for .223 Rem. loaded with the .224 | 50gr | Barnes VLC S. Hodgdon H322 delivers the highest muzzle velocity at 3,301 fps; across all powders the maximum-charge window runs from 2,060 fps to 3,301 fps. Accurate 2015 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (379 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Hodgdon H322, Alliant Reloder-10x rank at the top here: for .223 Rem. with the .224 | 50gr | Barnes VLC S they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data