top of page

Load data for .223 Rem. + .224 | 50gr | Barnes TSX S

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): ADI AR 2207, Alliant Reloder-7, IMR 4198, Norma 200, Vihtavuori N120

.223 Rem. + .224 | 50gr | Barnes TSX S

Load Specifications

Bullet:
.224 | 50gr | Barnes TSX S
Manufacturer SKU:
30174
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.770" | 19.6mm
Caliber:
.223 Rem.
Case Length (l3):
1.759" | 44.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.303" | 7.7mm
Shank Seated Depth:
0.303" | 7.7mm
Case Capacity:
28.8 Grains of Water | 1.87 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
55114 psi | 3800 bar
LID:
LID_B448_C135

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 64 loads in caliber .223 Rem. with .224 | 50gr | Barnes TSX S bullet and 32 powders such as ADI AR 2207, Alliant Reloder-7, IMR 4198, Norma 200, Vihtavuori N120. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 9 fps

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
94%
49197
89%
**19
100%
ADI AR 2219
<<locked>>
96%
48776
88%
**35
96%
Accurate 1680
<<locked>>
85%
48718
88%
**59
97%
Accurate 2015
<<locked>>
96%
39146
71%
**18
96%
[Accurate 2460]*
<<locked>>
97%
43192
78%
**77
92%
[Accurate 2495]*
<<locked>>
97%
31647
57%
**36
93%
Alliant AR-Comp
<<locked>>
96%
34911
63%
**86
97%
Alliant Reloder-10x
<<locked>>
96%
44150
80%
**56
98%
Alliant Reloder-7 👍
<<locked>>
92%
48660
88%
**69
99%
Baschieri & Pellagri 106
<<locked>>
95%
48863
89%
**10
97%
[Hodgdon CFE BLK]*
<<locked>>
92%
49342
90%
**00
92%
[Hodgdon H322]*
<<locked>>
97%
41133
75%
**81
94%
Hodgdon H335
<<locked>>
96%
48675
88%
**19
95%
Hodgdon H4198
<<locked>>
93%
48762
88%
**27
96%
Hodgdon TrailBoss
<<locked>>
96%
29051
53%
**82
100%
IMR 4198 👍
<<locked>>
96%
45701
83%
**33
99%
IMR 4227
<<locked>>
87%
48167
87%
**17
100%
[Lovex D073.4]*
<<locked>>
97%
46543
84%
**27
92%
[Lovex D073.5]*
<<locked>>
97%
43192
78%
**77
92%
Lovex S053
<<locked>>
88%
49066
89%
**23
100%
Norma 200 👍
<<locked>>
96%
49269
89%
**25
99%
ReloadSwiss RS 14
<<locked>>
96%
28747
52%
**24
100%
ReloadSwiss RS 36
<<locked>>
87%
48878
89%
**73
100%
[ReloadSwiss RS 40]*
<<locked>>
96%
43540
79%
**00
92%
[Rottweil R 901]*
<<locked>>
96%
37956
69%
**72
92%
SNPE Vectan BA6 1/2
<<locked>>
92%
49400
90%
**59
100%
SNPE Vectan SP 10
<<locked>>
95%
48037
87%
**09
95%
[SNPE Vectan Tubal 3000]*
<<locked>>
96%
37579
68%
**97
91%
[Somchem S335]*
<<locked>>
97%
36941
67%
**07
93%
Vihtavuori N120 👍
<<locked>>
95%
47892
87%
**43
100%
Vihtavuori N130
<<locked>>
97%
41974
76%
**31
98%
[Vihtavuori N133]*
<<locked>>
96%
34360
62%
**54
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
33083
60%
**84
99%
[ADI AR 2219]*
<<locked>>
85%
33388
61%
**84
91%
Accurate 1680
<<locked>>
81%
42815
78%
**35
96%
[Accurate 2015]*
<<locked>>
83%
26150
47%
**67
90%
[Accurate 2460]*
<<locked>>
94%
39320
71%
**99
90%
[Accurate 2495]*
<<locked>>
92%
25904
47%
**66
90%
[Alliant AR-Comp]*
<<locked>>
84%
23888
43%
**21
90%
[Alliant Reloder-10x]*
<<locked>>
81%
27238
49%
**20
92%
Alliant Reloder-7
<<locked>>
81%
34867
63%
**77
96%
[Baschieri & Pellagri 106]*
<<locked>>
81%
30414
55%
**00
91%
[Hodgdon CFE BLK]*
<<locked>>
88%
43787
79%
**86
90%
[Hodgdon H322]*
<<locked>>
90%
33388
61%
**84
91%
[Hodgdon H335]*
<<locked>>
87%
34925
63%
**13
90%
[Hodgdon H4198]*
<<locked>>
81%
33359
61%
**79
91%
Hodgdon TrailBoss
<<locked>>
81%
22742
41%
**18
100%
IMR 4198
<<locked>>
81%
29965
54%
**53
95%
IMR 4227
<<locked>>
81%
40451
73%
**69
99%
[Lovex D073.4]*
<<locked>>
93%
40901
74%
**18
91%
[Lovex D073.5]*
<<locked>>
94%
39320
71%
**99
90%
Lovex S053
<<locked>>
81%
39639
72%
**46
100%
Norma 200
<<locked>>
81%
30734
56%
**15
95%
ReloadSwiss RS 14
<<locked>>
81%
22611
41%
**64
100%
ReloadSwiss RS 36
<<locked>>
81%
39421
72%
**82
99%
[ReloadSwiss RS 40]*
<<locked>>
92%
38435
70%
**86
90%
[Rottweil R 901]*
<<locked>>
94%
34795
63%
**00
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
36506
66%
**46
100%
[SNPE Vectan SP 10]*
<<locked>>
87%
35636
65%
**40
91%
[SNPE Vectan Tubal 3000]*
<<locked>>
93%
34418
62%
**15
90%
[Somchem S335]*
<<locked>>
92%
31328
57%
**66
90%
Vihtavuori N120
<<locked>>
81%
30777
56%
**85
99%
[Vihtavuori N130]*
<<locked>>
81%
26121
47%
**21
91%
[Vihtavuori N133]*
<<locked>>
89%
27818
50%
**67
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page