
Load Specifications
Load data in caliber .223 Rem. with .224 | 46gr | RWS TMS bullet and 23 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, SNPE Vectan SP 3 and Alliant Reloder-10x.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 88% | 47,950 psi | 87% | 3248 fps | 98.7% |
| Accurate 2015ᴾ | <<locked>> | 100% | 43,279 psi | 79% | 3241 fps | 97% |
| Accurate LT-30 | <<locked>> | 94% | 48,544 psi | 88% | 3245 fps | 96.5% |
| ADI AR 2207 | <<locked>> | 94% | 49,734 psi | 90% | 3386 fps | 100% |
| ADI AR 2219 | <<locked>> | 96% | 48,907 psi | 89% | 3389 fps | 96.4% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 40,234 psi | 73% | 3268 fps | 98.6% |
| Alliant Reloder-10x | <<locked>> | 98% | 47,021 psi | 85% | 3356 fps | 98.7% |
| Alliant Reloder-7 | <<locked>> | 92% | 49,095 psi | 89% | 3327 fps | 99.2% |
| Baschieri & Pellagri 106 | <<locked>> | 94% | 46,847 psi | 85% | 3215 fps | 96.6% |
| Hodgdon H322 | <<locked>> | 98% | 47,079 psi | 86% | 3353 fps | 96% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,298 psi | 55% | 2133 fps | 100% |
| IMR 4198 | <<locked>> | 98% | 49,023 psi | 89% | 3350 fps | 99.5% |
| IMR 4227 | <<locked>> | 86% | 47,558 psi | 86% | 3268 fps | 99.8% |
| Lovex S053 | <<locked>> | 88% | 48,530 psi | 88% | 3264 fps | 100% |
| Norma 200 | <<locked>> | 94% | 47,456 psi | 86% | 3346 fps | 99.3% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,124 psi | 55% | 2182 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 88% | 49,676 psi | 90% | 3340 fps | 99.9% |
| SNPE Vectan BA6 1/2 | <<locked>> | 92% | 49,313 psi | 90% | 3114 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 98% | 47,834 psi | 87% | 3350 fps | 97.1% |
| Vihtavuori N110 | <<locked>> | 82% | 47,761 psi | 87% | 3182 fps | 100% |
| Vihtavuori N120 | <<locked>> | 92% | 46,731 psi | 85% | 3281 fps | 100% |
| Vihtavuori N130ᴾ | <<locked>> | 100% | 48,124 psi | 87% | 3294 fps | 98.7% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 41,655 psi | 76% | 3163 fps | 96.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 36,738 psi | 67% | 3012 fps | 96.2% |
| Accurate 2015 | <<locked>> | 96% | 37,884 psi | 69% | 3123 fps | 95.4% |
| Accurate LT-30 | <<locked>> | 90% | 42,844 psi | 78% | 3133 fps | 95% |
| ADI AR 2207 | 19.2 gr | 80% | 32,010 psi | 58% | 3002 fps | 98.4% |
| ADI AR 2219 | <<locked>> | 94% | 45,847 psi | 83% | 3327 fps | 95.6% |
| Alliant AR-Comp | <<locked>> | 92% | 31,082 psi | 57% | 3015 fps | 95.4% |
| Alliant Reloder-10x | 21.3 gr | 88% | 34,272 psi | 62% | 3068 fps | 95.5% |
| Alliant Reloder-7 | <<locked>> | 80% | 33,460 psi | 61% | 2982 fps | 95.7% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 41,089 psi | 75% | 3097 fps | 95% |
| Hodgdon H322 | <<locked>> | 96% | 44,106 psi | 80% | 3291 fps | 95.1% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,234 psi | 40% | 1916 fps | 100% |
| IMR 4198 | <<locked>> | 84% | 32,648 psi | 59% | 2972 fps | 95.7% |
| IMR 4227 | <<locked>> | 80% | 39,537 psi | 72% | 3100 fps | 99% |
| Lovex S053 | <<locked>> | 80% | 38,479 psi | 70% | 3068 fps | 100% |
| Norma 200 | <<locked>> | 82% | 31,778 psi | 58% | 2982 fps | 95.4% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 21,799 psi | 40% | 1955 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 38,450 psi | 70% | 3110 fps | 98.7% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 35,679 psi | 65% | 2871 fps | 100% |
| SNPE Vectan SP 3 | 22.8 gr | 94% | 42,569 psi | 77% | 3241 fps | 95.8% |
| Vihtavuori N110 | <<locked>> | 80% | 44,628 psi | 81% | 3130 fps | 100% |
| Vihtavuori N120 | <<locked>> | 80% | 32,184 psi | 59% | 2969 fps | 99.2% |
| Vihtavuori N130 | <<locked>> | 90% | 35,375 psi | 64% | 3022 fps | 95.6% |
| Vihtavuori N133 | <<locked>> | 98% | 39,044 psi | 71% | 3104 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 23 powders for .223 Rem. loaded with the .224 | 46gr | RWS TMS. ADI AR 2219 delivers the highest muzzle velocity at 3,389 fps; across all powders the maximum-charge window runs from 2,133 fps to 3,389 fps. Accurate 2015 gives the best case fill at 100 %, and 23 of the 23 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (379 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. Accurate 2015, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, SNPE Vectan SP 3, Alliant Reloder-10x rank at the top here: for .223 Rem. with the .224 | 46gr | RWS TMS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.