
Load Specifications
Load data in caliber .223 Rem. with .223 | 55gr | Merlin Virtus bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, ADI AR 2219 and Alliant Reloder-10x.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 86% | 47,572 psi | 86% | 3009 fps | 99.5% |
| Accurate 2015ᴾ | <<locked>> | 100% | 46,050 psi | 84% | 3064 fps | 98.8% |
| Accurate 2460 | <<locked>> | 98% | 48,370 psi | 88% | 3117 fps | 96.7% |
| Accurate 2495ᴾ | <<locked>> | 100% | 33,663 psi | 61% | 2881 fps | 96.4% |
| Accurate LT-30 | <<locked>> | 92% | 48,109 psi | 87% | 3012 fps | 97.9% |
| Accurate LT-32 | <<locked>> | 92% | 48,602 psi | 88% | 3015 fps | 96% |
| ADI AR 2207 | <<locked>> | 90% | 46,760 psi | 85% | 3077 fps | 100% |
| ADI AR 2219 | <<locked>> | 94% | 48,776 psi | 89% | 3156 fps | 97.9% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 42,830 psi | 78% | 3100 fps | 99.9% |
| Alliant Reloder-10x | <<locked>> | 96% | 47,152 psi | 86% | 3117 fps | 99.6% |
| Alliant Reloder-7 | <<locked>> | 90% | 48,602 psi | 88% | 3077 fps | 99.8% |
| Baschieri & Pellagri 106 | <<locked>> | 92% | 46,253 psi | 84% | 2982 fps | 97.9% |
| Hodgdon H322 | <<locked>> | 96% | 46,804 psi | 85% | 3120 fps | 97.5% |
| Hodgdon H335 | <<locked>> | 96% | 47,892 psi | 87% | 3133 fps | 96.8% |
| Hodgdon H4198 | <<locked>> | 88% | 46,673 psi | 85% | 3005 fps | 97% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,618 psi | 56% | 1942 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 40,770 psi | 74% | 3061 fps | 97% |
| IMR 4198 | <<locked>> | 96% | 49,269 psi | 90% | 3107 fps | 100% |
| IMR 4227 | <<locked>> | 84% | 46,833 psi | 85% | 3002 fps | 100% |
| Lovex D073.4 | <<locked>> | 92% | 49,240 psi | 90% | 3140 fps | 96% |
| Lovex S053 | <<locked>> | 86% | 48,443 psi | 88% | 3002 fps | 100% |
| Norma 200 | <<locked>> | 92% | 46,702 psi | 85% | 3091 fps | 99.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,487 psi | 55% | 1991 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 86% | 49,676 psi | 90% | 3084 fps | 100% |
| Rottweil R 901ᴾ | <<locked>> | 100% | 45,382 psi | 83% | 3058 fps | 96% |
| Shooters World AR Plus | <<locked>> | 92% | 49,240 psi | 90% | 3140 fps | 96% |
| SNPE Vectan BA6 1/2 | <<locked>> | 90% | 49,501 psi | 90% | 2858 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 94% | 49,110 psi | 89% | 3150 fps | 97% |
| SNPE Vectan SP 3 | <<locked>> | 96% | 48,037 psi | 87% | 3117 fps | 98.5% |
| SNPE Vectan Tubal 3000ᴾ | <<locked>> | 100% | 45,078 psi | 82% | 2979 fps | 95.9% |
| Somchem S335ᴾ | <<locked>> | 100% | 43,236 psi | 79% | 2969 fps | 96.6% |
| Vihtavuori N120 | <<locked>> | 90% | 46,876 psi | 85% | 3028 fps | 100% |
| Vihtavuori N130 | <<locked>> | 98% | 48,196 psi | 88% | 3061 fps | 99.5% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 44,048 psi | 80% | 2989 fps | 98.3% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 36,027 psi | 66% | 2913 fps | 96.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 38,392 psi | 70% | 2831 fps | 98.1% |
| Accurate 2015 | <<locked>> | 90% | 33,330 psi | 61% | 2799 fps | 95.7% |
| Accurate 2460 | <<locked>> | 94% | 42,090 psi | 77% | 2995 fps | 95% |
| Accurate 2495 | <<locked>> | 98% | 31,633 psi | 58% | 2831 fps | 95.7% |
| Accurate LT-30 | <<locked>> | 84% | 37,376 psi | 68% | 2795 fps | 95.2% |
| Accurate LT-32 | <<locked>> | 90% | 45,498 psi | 83% | 2956 fps | 95.2% |
| ADI AR 2207 | <<locked>> | 80% | 33,750 psi | 61% | 2815 fps | 99.6% |
| ADI AR 2219 | 22.2 gr | 88% | 39,204 psi | 71% | 2963 fps | 95.5% |
| Alliant AR-Comp | <<locked>> | 86% | 27,166 psi | 49% | 2690 fps | 95.5% |
| Alliant Reloder-10x | 18.9 gr | 82% | 29,675 psi | 54% | 2723 fps | 95.5% |
| Alliant Reloder-7 | <<locked>> | 80% | 35,114 psi | 64% | 2802 fps | 97.8% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 35,433 psi | 64% | 2762 fps | 95% |
| Hodgdon H322 | 22 gr | 90% | 38,145 psi | 69% | 2940 fps | 95.2% |
| Hodgdon H335 | <<locked>> | 92% | 41,901 psi | 76% | 3015 fps | 95.2% |
| Hodgdon H4198 | <<locked>> | 84% | 41,350 psi | 75% | 2900 fps | 95.7% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,539 psi | 41% | 1745 fps | 100% |
| IMR 3031 | <<locked>> | 96% | 35,534 psi | 65% | 2936 fps | 95.2% |
| IMR 4198 | <<locked>> | 80% | 30,589 psi | 56% | 2697 fps | 96.7% |
| IMR 4227 | <<locked>> | 80% | 41,249 psi | 75% | 2897 fps | 99.9% |
| Lovex D073.4 | <<locked>> | 90% | 45,876 psi | 83% | 3077 fps | 95.2% |
| Lovex S053 | <<locked>> | 80% | 40,567 psi | 74% | 2864 fps | 100% |
| Norma 200 | <<locked>> | 80% | 31,705 psi | 58% | 2766 fps | 97.2% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,104 psi | 40% | 1781 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 41,118 psi | 75% | 2930 fps | 99.8% |
| Rottweil R 901 | <<locked>> | 98% | 42,438 psi | 77% | 2999 fps | 95.1% |
| Shooters World AR Plus | <<locked>> | 90% | 45,876 psi | 83% | 3077 fps | 95.2% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 37,681 psi | 69% | 2667 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 42,438 psi | 77% | 3025 fps | 95.3% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 34,925 psi | 64% | 2841 fps | 95.1% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 42,612 psi | 77% | 2933 fps | 95.2% |
| Somchem S335 | <<locked>> | 96% | 38,377 psi | 70% | 2871 fps | 95.2% |
| Vihtavuori N120 | <<locked>> | 80% | 33,968 psi | 62% | 2782 fps | 100% |
| Vihtavuori N130 | <<locked>> | 84% | 30,734 psi | 56% | 2687 fps | 95.6% |
| Vihtavuori N133 | <<locked>> | 92% | 34,519 psi | 63% | 2785 fps | 95.8% |
| Vihtavuori N135 | <<locked>> | 96% | 31,807 psi | 58% | 2805 fps | 95.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for .223 Rem. loaded with the .223 | 55gr | Merlin Virtus. ADI AR 2219 delivers the highest muzzle velocity at 3,156 fps; across all powders the maximum-charge window runs from 1,942 fps to 3,156 fps. Accurate 2015 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (379 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.223" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, ADI AR 2219, Alliant Reloder-10x rank at the top here: for .223 Rem. with the .223 | 55gr | Merlin Virtus they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.