Load data for 5.56 x 45 NATO + .224 | 60gr | Berger FBHP

5.56 x 45 NATO cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:60 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.759"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:20"
Max. allowed Pressure:62,366 psi
Recommended Twist Rate:1:11.0

Load data in caliber 5.56 x 45 NATO with .224 | 60gr | Berger FBHP bullet and 46 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, SNPE Vectan SP 10 and Hodgdon H335.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%55,245 psi89%2910 fps99.9%
Accurate 2015ᴾ<<locked>>100%51,256 psi82%2930 fps99.3%
Accurate 2460<<locked>>98%54,070 psi87%2986 fps97.5%
Accurate 2495ᴾ<<locked>>100%39,798 psi64%2785 fps97.8%
Accurate 2520ᴾ<<locked>>100%48,167 psi77%2933 fps95.9%
Accurate 2520ᴾ<<locked>>100%48,167 psi77%2933 fps95.9%
Accurate LT-30<<locked>>94%55,593 psi89%2917 fps98.9%
Accurate LT-32<<locked>>94%56,130 psi90%2927 fps97.4%
ADI AR 2205<<locked>>82%56,362 psi90%2825 fps100%
ADI AR 2207<<locked>>92%55,114 psi88%2976 fps100%
ADI AR 2219<<locked>>94%53,722 psi86%3012 fps98.6%
Alliant AR-Compᴾ<<locked>>100%47,630 psi76%2959 fps100%
Alliant Reloder-10x<<locked>>98%55,056 psi88%3012 fps100%
Alliant Reloder-7<<locked>>90%53,316 psi85%2927 fps100%
Baschieri & Pellagri 106<<locked>>94%54,201 psi87%2900 fps99%
Hodgdon Benchmarkᴾ<<locked>>100%54,157 psi87%2940 fps95.9%
Hodgdon H322ᴾ<<locked>>100%53,722 psi86%3012 fps98.6%
Hodgdon H335<<locked>>94%52,823 psi85%2992 fps97.6%
Hodgdon H4198<<locked>>92%53,301 psi85%2907 fps98.2%
Hodgdon TrailBossᴾ<<locked>>100%31,952 psi51%1827 fps100%
IMR 3031ᴾ<<locked>>100%40,741 psi65%2838 fps96.7%
IMR 4198<<locked>>96%53,664 psi86%2953 fps100%
IMR 4227<<locked>>86%54,317 psi87%2900 fps100%
Lovex D073.4<<locked>>92%55,535 psi89%3018 fps97.1%
Lovex D073.5<<locked>>98%54,781 psi88%2989 fps96.4%
Lovex S053<<locked>>88%55,477 psi89%2887 fps100%
Norma 200<<locked>>94%55,622 psi89%3002 fps100%
Norma 202ᴾ<<locked>>100%46,224 psi74%2881 fps96.2%
ReloadSwiss RS 14ᴾ<<locked>>100%31,473 psi50%1864 fps100%
ReloadSwiss RS 36<<locked>>86%54,114 psi87%2930 fps100%
ReloadSwiss RS 40<<locked>>98%54,897 psi88%3002 fps96.9%
Rottweil R 901ᴾ<<locked>>100%50,691 psi81%2930 fps96.9%
Shooters World AR Plus<<locked>>92%55,535 psi89%3018 fps97.1%
SNPE Vectan BA6 1/2<<locked>>92%56,217 psi90%2740 fps100%
SNPE Vectan SP 10<<locked>>94%54,143 psi87%3009 fps97.7%
SNPE Vectan SP 3<<locked>>96%52,953 psi85%2972 fps99.1%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%50,256 psi81%2858 fps96.9%
Somchem S321ᴾ<<locked>>100%56,318 psi90%3035 fps96%
Somchem S335ᴾ<<locked>>100%48,472 psi78%2851 fps97.6%
Vihtavuori N110<<locked>>82%54,549 psi87%2795 fps100%
Vihtavuori N120<<locked>>92%55,143 psi88%2923 fps100%
Vihtavuori N130<<locked>>98%52,953 psi85%2913 fps99.8%
Vihtavuori N133ᴾ<<locked>>100%49,269 psi79%2864 fps99%
Vihtavuori N135ᴾ<<locked>>100%41,118 psi66%2802 fps97.9%
Vihtavuori N140ᴾ<<locked>>100%43,569 psi70%2802 fps95.9%
Winchester 748ᴾ<<locked>>100%54,708 psi88%3048 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%42,076 psi67%2694 fps98.7%
Accurate 2015<<locked>>86%32,837 psi53%2566 fps95.1%
Accurate 2460<<locked>>92%44,208 psi71%2818 fps95.3%
Accurate 2495<<locked>>94%32,068 psi51%2612 fps95.3%
Accurate 2520<<locked>>98%44,976 psi72%2877 fps95%
Accurate 2520<<locked>>98%44,976 psi72%2877 fps95%
Accurate LT-30<<locked>>82%38,203 psi61%2605 fps95.3%
Accurate LT-32<<locked>>88%46,282 psi74%2762 fps95.3%
ADI AR 2205<<locked>>80%52,866 psi85%2776 fps100%
ADI AR 2207<<locked>>80%37,695 psi60%2680 fps99.9%
ADI AR 221921.8 gr86%40,509 psi65%2772 fps95.7%
Alliant AR-Comp<<locked>>84%28,529 psi46%2520 fps95.9%
Alliant Reloder-10x<<locked>>80%31,691 psi51%2556 fps95.9%
Alliant Reloder-7<<locked>>80%38,957 psi62%2671 fps98.6%
Baschieri & Pellagri 106<<locked>>82%36,593 psi59%2582 fps95.1%
Hodgdon Benchmark<<locked>>98%50,865 psi82%2887 fps95.1%
Hodgdon H322<<locked>>90%38,943 psi62%2740 fps95.1%
Hodgdon H33523.6 gr88%42,830 psi69%2815 fps95.2%
Hodgdon H4198<<locked>>84%42,148 psi68%2703 fps95.8%
Hodgdon TrailBoss<<locked>>80%23,308 psi37%1631 fps100%
IMR 3031<<locked>>96%36,100 psi58%2730 fps95.1%
IMR 4198<<locked>>80%33,228 psi53%2559 fps97.4%
IMR 4227<<locked>>80%44,947 psi72%2753 fps100%
Lovex D073.4<<locked>>88%47,761 psi77%2890 fps95.5%
Lovex D073.5<<locked>>96%50,473 psi81%2923 fps95.4%
Lovex S053<<locked>>80%43,816 psi70%2707 fps100%
Norma 200<<locked>>80%35,447 psi57%2635 fps98%
Norma 202<<locked>>98%43,221 psi69%2825 fps95.4%
ReloadSwiss RS 14<<locked>>80%23,482 psi38%1677 fps100%
ReloadSwiss RS 36<<locked>>80%44,454 psi71%2776 fps100%
ReloadSwiss RS 40<<locked>>94%48,167 psi77%2890 fps95.4%
Rottweil R 901<<locked>>96%44,570 psi71%2818 fps95.5%
Shooters World AR Plus<<locked>>88%47,761 psi77%2890 fps95.5%
SNPE Vectan BA6 1/2<<locked>>80%40,495 psi65%2513 fps100%
SNPE Vectan SP 1023.1 gr88%44,034 psi71%2835 fps95.5%
SNPE Vectan SP 3<<locked>>84%36,201 psi58%2654 fps95.3%
SNPE Vectan Tubal 3000<<locked>>96%43,903 psi70%2746 fps95.4%
Somchem S321<<locked>>98%52,069 psi83%2969 fps95.1%
Somchem S335<<locked>>94%39,958 psi64%2690 fps95.4%
Vihtavuori N110<<locked>>80%51,663 psi83%2756 fps100%
Vihtavuori N120<<locked>>80%37,855 psi61%2648 fps100%
Vihtavuori N130<<locked>>80%30,400 psi49%2464 fps95.1%
Vihtavuori N133<<locked>>88%33,968 psi54%2562 fps95.3%
Vihtavuori N135<<locked>>94%33,895 psi54%2641 fps95.7%
Vihtavuori N140<<locked>>98%40,799 psi65%2749 fps95.1%
Winchester 748<<locked>>98%50,517 psi81%2979 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 46 powders for 5.56 x 45 NATO loaded with the .224 | 60gr | Berger FBHP. Winchester 748 delivers the highest muzzle velocity at 3,048 fps; across all powders the maximum-charge window runs from 1,827 fps to 3,048 fps. Accurate 2015 gives the best case fill at 100 %, and 46 of the 46 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (430 MPa), the top charges use 50–90 %, leaving at least 10 % headroom. The 60.0 gr projectile in 0.224" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, SNPE Vectan SP 10, Hodgdon H335 rank at the top here: for 5.56 x 45 NATO with the .224 | 60gr | Berger FBHP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data