
Load Specifications
Load data in caliber .223 Ackley Improved with .224 | 55gr | Nosler CT Ballistic Silvertip bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Hodgdon H335 and Hodgdon H322.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 84% | 49,487 psi | 90% | 3081 fps | 99.9% |
| Accurate 2015 | <<locked>> | 98% | 49,705 psi | 90% | 3163 fps | 99.6% |
| Accurate 2460 | <<locked>> | 94% | 48,486 psi | 88% | 3156 fps | 97.5% |
| Accurate 2495ᴾ | <<locked>> | 100% | 41,133 psi | 75% | 3071 fps | 98.9% |
| Accurate 2520 | <<locked>> | 98% | 49,197 psi | 89% | 3205 fps | 97.3% |
| Accurate 4064ᴾ | <<locked>> | 100% | 38,189 psi | 69% | 3018 fps | 95.8% |
| Accurate LT-30 | <<locked>> | 88% | 47,108 psi | 85% | 3038 fps | 98.4% |
| Accurate LT-32 | <<locked>> | 88% | 47,543 psi | 86% | 3045 fps | 96.7% |
| ADI AR 2207 | <<locked>> | 88% | 49,443 psi | 90% | 3150 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 48,080 psi | 87% | 3189 fps | 98.5% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 49,110 psi | 89% | 3248 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 92% | 46,963 psi | 85% | 3146 fps | 99.8% |
| Alliant Reloder-7 | <<locked>> | 86% | 48,399 psi | 88% | 3107 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 48,515 psi | 88% | 3064 fps | 98.9% |
| Hodgdon Benchmark | <<locked>> | 96% | 49,240 psi | 89% | 3120 fps | 95.9% |
| Hodgdon BL-C2ᴾ | <<locked>> | 100% | 49,850 psi | 90% | 3235 fps | 96.2% |
| Hodgdon H322 | <<locked>> | 94% | 49,313 psi | 89% | 3209 fps | 98.7% |
| Hodgdon H335 | <<locked>> | 92% | 47,485 psi | 86% | 3169 fps | 97.5% |
| Hodgdon H4198 | <<locked>> | 86% | 48,936 psi | 89% | 3094 fps | 98.2% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,879 psi | 58% | 2005 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 46,746 psi | 85% | 3228 fps | 99% |
| IMR 4198 | <<locked>> | 92% | 48,689 psi | 88% | 3136 fps | 100% |
| IMR 4227 | <<locked>> | 82% | 48,733 psi | 88% | 3071 fps | 100% |
| Lovex D073.4 | <<locked>> | 88% | 48,863 psi | 89% | 3176 fps | 96.8% |
| Lovex D073.5 | <<locked>> | 94% | 48,805 psi | 89% | 3153 fps | 96.2% |
| Lovex D073.6ᴾ | <<locked>> | 100% | 46,296 psi | 84% | 3166 fps | 96.6% |
| Lovex S053 | <<locked>> | 82% | 47,659 psi | 86% | 3022 fps | 100% |
| Norma 200 | <<locked>> | 88% | 47,021 psi | 85% | 3127 fps | 100% |
| Norma 202ᴾ | <<locked>> | 100% | 47,384 psi | 86% | 3166 fps | 97.6% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,836 psi | 58% | 2051 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 48,269 psi | 88% | 3097 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 94% | 49,008 psi | 89% | 3173 fps | 96.8% |
| Rottweil R 901 | <<locked>> | 98% | 48,646 psi | 88% | 3159 fps | 97.5% |
| Shooters World AR Plus | <<locked>> | 88% | 48,863 psi | 89% | 3176 fps | 96.8% |
| Shooters World Match Rifleᴾ | <<locked>> | 100% | 46,296 psi | 84% | 3166 fps | 96.6% |
| SNPE Vectan BA6 1/2 | <<locked>> | 86% | 48,631 psi | 88% | 2874 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 48,385 psi | 88% | 3179 fps | 97.6% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 48,095 psi | 87% | 3156 fps | 99.1% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 48,138 psi | 87% | 3081 fps | 97.5% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 40,959 psi | 74% | 2953 fps | 97% |
| Somchem S335ᴾ | <<locked>> | 100% | 49,690 psi | 90% | 3127 fps | 98.6% |
| Vihtavuori N120 | <<locked>> | 88% | 49,443 psi | 90% | 3097 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 48,008 psi | 87% | 3094 fps | 99.8% |
| Vihtavuori N133 | <<locked>> | 98% | 47,239 psi | 86% | 3084 fps | 99.3% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 42,076 psi | 76% | 3081 fps | 99% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 45,208 psi | 82% | 3091 fps | 97.4% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 43,424 psi | 79% | 3068 fps | 96.5% |
| Winchester 748 | <<locked>> | 98% | 47,950 psi | 87% | 3202 fps | 96% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 42,873 psi | 78% | 2959 fps | 99.4% |
| Accurate 2015 | <<locked>> | 82% | 29,733 psi | 54% | 2726 fps | 95% |
| Accurate 2460 | <<locked>> | 88% | 39,276 psi | 71% | 2972 fps | 95.1% |
| Accurate 2495 | <<locked>> | 90% | 29,153 psi | 53% | 2782 fps | 95.4% |
| Accurate 2520 | <<locked>> | 94% | 42,221 psi | 77% | 3074 fps | 95.6% |
| Accurate 4064 | <<locked>> | 98% | 35,824 psi | 65% | 2963 fps | 95% |
| Accurate LT-30 | <<locked>> | 80% | 36,564 psi | 66% | 2815 fps | 95.8% |
| Accurate LT-32 | <<locked>> | 84% | 42,163 psi | 77% | 2936 fps | 95.3% |
| ADI AR 2207 | <<locked>> | 80% | 38,377 psi | 70% | 2946 fps | 100% |
| ADI AR 2219 | 22.7 gr | 82% | 36,651 psi | 67% | 2943 fps | 95.6% |
| Alliant AR-Comp | <<locked>> | 80% | 25,614 psi | 46% | 2671 fps | 95.6% |
| Alliant Reloder-10x | <<locked>> | 80% | 32,213 psi | 58% | 2818 fps | 97.2% |
| Alliant Reloder-7 | <<locked>> | 80% | 39,813 psi | 72% | 2943 fps | 99.3% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 34,896 psi | 63% | 2785 fps | 95.7% |
| Hodgdon Benchmark | <<locked>> | 94% | 46,470 psi | 84% | 3068 fps | 95.2% |
| Hodgdon BL-C2 | <<locked>> | 98% | 46,311 psi | 84% | 3169 fps | 95.3% |
| Hodgdon H322 | 22.5 gr | 84% | 35,766 psi | 65% | 2920 fps | 95.3% |
| Hodgdon H335 | 24.6 gr | 86% | 38,725 psi | 70% | 2986 fps | 95.2% |
| Hodgdon H4198 | <<locked>> | 80% | 40,335 psi | 73% | 2920 fps | 96.3% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,424 psi | 43% | 1798 fps | 100% |
| IMR 3031 | <<locked>> | 90% | 33,837 psi | 61% | 2930 fps | 95.5% |
| IMR 4198 | <<locked>> | 80% | 33,982 psi | 62% | 2825 fps | 98.5% |
| IMR 4227 | <<locked>> | 80% | 45,759 psi | 83% | 3018 fps | 100% |
| Lovex D073.4 | <<locked>> | 84% | 42,525 psi | 77% | 3054 fps | 95.2% |
| Lovex D073.5 | <<locked>> | 92% | 45,281 psi | 82% | 3091 fps | 95.4% |
| Lovex D073.6 | <<locked>> | 98% | 42,902 psi | 78% | 3100 fps | 95.8% |
| Lovex S053 | <<locked>> | 80% | 44,817 psi | 81% | 2976 fps | 100% |
| Norma 200 | <<locked>> | 80% | 36,318 psi | 66% | 2907 fps | 98.9% |
| Norma 202 | <<locked>> | 94% | 38,885 psi | 71% | 2992 fps | 95.3% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,540 psi | 43% | 1847 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 45,426 psi | 82% | 3048 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 90% | 43,424 psi | 79% | 3061 fps | 95.3% |
| Rottweil R 901 | <<locked>> | 92% | 40,712 psi | 74% | 2995 fps | 95.5% |
| Shooters World AR Plus | <<locked>> | 84% | 42,525 psi | 77% | 3054 fps | 95.2% |
| Shooters World Match Rifle | <<locked>> | 98% | 42,902 psi | 78% | 3100 fps | 95.8% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 41,437 psi | 75% | 2759 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 84% | 39,479 psi | 72% | 2999 fps | 95.3% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 32,547 psi | 59% | 2812 fps | 95.1% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 39,914 psi | 72% | 2917 fps | 95.4% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 36,216 psi | 66% | 2844 fps | 95.5% |
| Somchem S335 | <<locked>> | 90% | 36,448 psi | 66% | 2861 fps | 95.5% |
| Vihtavuori N120 | <<locked>> | 80% | 38,537 psi | 70% | 2904 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 30,864 psi | 56% | 2720 fps | 96.5% |
| Vihtavuori N133 | <<locked>> | 84% | 30,705 psi | 56% | 2720 fps | 95.2% |
| Vihtavuori N135 | <<locked>> | 90% | 30,661 psi | 56% | 2805 fps | 95.7% |
| Vihtavuori N140 | <<locked>> | 94% | 37,173 psi | 67% | 2920 fps | 95.1% |
| Vihtavuori N540 | <<locked>> | 96% | 38,522 psi | 70% | 2963 fps | 95% |
| Winchester 748 | <<locked>> | 96% | 44,570 psi | 81% | 3133 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .223 Ackley Improved loaded with the .224 | 55gr | Nosler CT Ballistic Silvertip. Alliant AR-Comp delivers the highest muzzle velocity at 3,248 fps; across all powders the maximum-charge window runs from 2,005 fps to 3,248 fps. Accurate 2495 gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (380 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Hodgdon H335, Hodgdon H322 rank at the top here: for .223 Ackley Improved with the .224 | 55gr | Nosler CT Ballistic Silvertip they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.