Load data for .222 Rem. + .224 | 60gr | Rhino Solid Shank

.222 Rem. cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:60 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.7"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:27.9 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:53,664 psi
Recommended Twist Rate:1:12.0

Load data in caliber .222 Rem. with .224 | 60gr | Rhino Solid Shank bullet and 32 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, SNPE Vectan SP 3 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%47,442 psi88%2854 fps99.6%
Accurate 2015ᴾ<<locked>>100%46,021 psi86%2913 fps98.9%
Accurate 2460<<locked>>98%48,530 psi90%2966 fps96.8%
Accurate 2495ᴾ<<locked>>100%34,301 psi64%2756 fps96.9%
Accurate LT-30<<locked>>92%48,501 psi90%2861 fps98.1%
ADI AR 2207<<locked>>90%46,746 psi87%2917 fps100%
ADI AR 2219<<locked>>92%45,339 psi84%2940 fps97.4%
Alliant AR-Compᴾ<<locked>>100%43,178 psi80%2946 fps99.9%
Alliant Reloder-10x<<locked>>96%47,224 psi88%2960 fps99.7%
Alliant Reloder-7<<locked>>88%46,311 psi86%2878 fps99.7%
Baschieri & Pellagri 106<<locked>>92%46,369 psi86%2837 fps98%
Hodgdon H322<<locked>>98%45,339 psi84%2940 fps97.4%
Hodgdon H335<<locked>>94%47,761 psi89%2979 fps96.9%
Hodgdon H4198<<locked>>90%46,557 psi87%2848 fps97.2%
Hodgdon TrailBossᴾ<<locked>>100%31,662 psi59%1827 fps100%
IMR 3031ᴾ<<locked>>100%37,130 psi69%2824 fps96%
IMR 4198<<locked>>94%46,572 psi87%2903 fps99.9%
IMR 4227<<locked>>84%47,210 psi88%2848 fps100%
Lovex S053<<locked>>84%45,614 psi85%2798 fps100%
Norma 200<<locked>>92%47,645 psi89%2947 fps99.9%
ReloadSwiss RS 14ᴾ<<locked>>100%31,604 psi59%1875 fps100%
ReloadSwiss RS 36<<locked>>84%46,804 psi87%2877 fps100%
Rottweil R 901ᴾ<<locked>>100%46,122 psi86%2911 fps96.2%
SNPE Vectan BA6 1/2<<locked>>88%46,847 psi87%2664 fps100%
SNPE Vectan SP 10<<locked>>92%45,484 psi85%2934 fps96.3%
SNPE Vectan SP 3<<locked>>96%47,935 psi89%2956 fps98.6%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%45,788 psi85%2837 fps96.1%
Somchem S335ᴾ<<locked>>100%44,744 psi83%2829 fps96.8%
Vihtavuori N120<<locked>>92%46,427 psi87%2861 fps100%
Vihtavuori N130<<locked>>98%46,862 psi87%2887 fps99.5%
Vihtavuori N133ᴾ<<locked>>100%41,118 psi77%2783 fps97.8%
Vihtavuori N135ᴾ<<locked>>100%36,593 psi68%2782 fps97.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,001 psi73%2697 fps98.4%
Accurate 2015<<locked>>88%31,444 psi59%2608 fps95.2%
Accurate 2460<<locked>>94%41,930 psi78%2848 fps95.2%
Accurate 2495<<locked>>96%30,269 psi56%2657 fps95.4%
Accurate LT-30<<locked>>84%37,666 psi70%2654 fps95.5%
ADI AR 220716.9 gr80%34,200 psi64%2677 fps99.8%
ADI AR 221920.1 gr86%37,115 psi69%2767 fps95%
Alliant AR-Comp<<locked>>84%25,947 psi48%2512 fps95.1%
Alliant Reloder-10x<<locked>>80%28,645 psi53%2552 fps95.3%
Alliant Reloder-7<<locked>>80%35,868 psi67%2671 fps98.2%
Baschieri & Pellagri 106<<locked>>84%36,071 psi67%2636 fps95.4%
Hodgdon H322<<locked>>92%37,681 psi70%2780 fps95.2%
Hodgdon H335<<locked>>90%41,524 psi77%2860 fps95.3%
Hodgdon H4198<<locked>>84%39,334 psi73%2704 fps95.3%
Hodgdon TrailBoss<<locked>>80%22,931 psi43%1639 fps100%
IMR 3031<<locked>>98%34,432 psi64%2761 fps95%
IMR 4198<<locked>>80%30,748 psi57%2557 fps97%
IMR 4227<<locked>>80%41,945 psi78%2755 fps99.9%
Lovex S053<<locked>>80%40,683 psi76%2712 fps100%
Norma 200<<locked>>80%32,314 psi60%2634 fps97.5%
ReloadSwiss RS 14<<locked>>80%22,626 psi42%1674 fps100%
ReloadSwiss RS 36<<locked>>80%41,147 psi77%2777 fps99.9%
Rottweil R 901<<locked>>98%43,976 psi82%2863 fps95.5%
SNPE Vectan BA6 1/2<<locked>>80%38,247 psi71%2527 fps100%
SNPE Vectan SP 10<<locked>>90%43,018 psi80%2886 fps95.6%
SNPE Vectan SP 318.4 gr86%35,346 psi66%2703 fps95.5%
SNPE Vectan Tubal 3000<<locked>>98%43,468 psi81%2790 fps95.5%
Somchem S335<<locked>>96%38,914 psi73%2739 fps95.6%
Vihtavuori N120<<locked>>80%32,082 psi60%2588 fps99.9%
Vihtavuori N130<<locked>>82%28,761 psi54%2495 fps95%
Vihtavuori N133<<locked>>92%32,561 psi61%2599 fps95.3%
Vihtavuori N135<<locked>>96%32,082 psi60%2674 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 32 powders for .222 Rem. loaded with the .224 | 60gr | Rhino Solid Shank. Hodgdon H335 delivers the highest muzzle velocity at 2,979 fps; across all powders the maximum-charge window runs from 1,827 fps to 2,979 fps. Accurate 2015 gives the best case fill at 100 %, and 32 of the 32 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (370 MPa), the top charges use 59–90 %, leaving at least 10 % headroom. The 60.0 gr projectile in 0.224" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, SNPE Vectan SP 3, ADI AR 2207 rank at the top here: for .222 Rem. with the .224 | 60gr | Rhino Solid Shank they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data