Load data for .222 Rem. + .224 | 56gr | RWS TMS

.222 Rem. cartridge drawing
RWS logo

Load Specifications

Bullet Manufacturer:RWS
Bullet Weight:56 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.7"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:27.9 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:53,664 psi

Load data in caliber .222 Rem. with .224 | 56gr | RWS TMS bullet and 29 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are SNPE Vectan SP 3, Alliant Reloder-10x and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%46,775 psi87%2936 fps99.2%
Accurate 2015ᴾ<<locked>>100%44,860 psi84%2989 fps98.3%
Accurate 2460<<locked>>98%47,036 psi88%3035 fps95.9%
Accurate 2495ᴾ<<locked>>100%33,054 psi62%2815 fps95.8%
Accurate LT-30<<locked>>92%47,224 psi88%2936 fps97.4%
ADI AR 2207<<locked>>90%45,426 psi85%3000 fps100%
ADI AR 2219<<locked>>94%47,616 psi89%3077 fps97.3%
Alliant AR-Compᴾ<<locked>>100%42,830 psi80%3021 fps99.6%
Alliant Reloder-10x<<locked>>96%45,600 psi85%3032 fps99.2%
Alliant Reloder-7<<locked>>90%47,616 psi89%3002 fps99.6%
Baschieri & Pellagri 106<<locked>>94%48,356 psi90%2963 fps97.9%
Hodgdon H322<<locked>>98%44,367 psi83%3015 fps96.6%
Hodgdon H335<<locked>>94%46,398 psi86%3048 fps96%
Hodgdon H4198<<locked>>90%45,469 psi85%2923 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%31,372 psi58%1899 fps100%
IMR 4198<<locked>>96%48,008 psi89%3028 fps99.8%
IMR 4227<<locked>>84%46,354 psi86%2936 fps100%
Lovex S053<<locked>>86%47,456 psi88%2933 fps100%
Norma 200<<locked>>92%45,992 psi86%3022 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%31,227 psi58%1948 fps100%
ReloadSwiss RS 36<<locked>>86%48,283 psi90%3006 fps100%
SNPE Vectan BA6 1/2<<locked>>88%46,253 psi86%2758 fps100%
SNPE Vectan SP 10<<locked>>94%47,442 psi88%3066 fps96.2%
SNPE Vectan SP 3<<locked>>96%47,036 psi88%3041 fps98%
Somchem S335ᴾ<<locked>>100%43,424 psi81%2899 fps95.9%
Vihtavuori N120<<locked>>94%47,747 psi89%2986 fps100%
Vihtavuori N130<<locked>>98%46,847 psi87%2970 fps99.1%
Vihtavuori N133ᴾ<<locked>>100%40,901 psi76%2860 fps97.1%
Vihtavuori N135ᴾ<<locked>>100%35,665 psi66%2848 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%38,043 psi71%2769 fps97.7%
Accurate 2015<<locked>>90%32,750 psi61%2730 fps95%
Accurate 2460<<locked>>96%43,787 psi82%2972 fps95%
Accurate 2495<<locked>>98%31,082 psi58%2766 fps95%
Accurate LT-30<<locked>>86%38,957 psi73%2772 fps95.3%
ADI AR 2207<<locked>>80%33,475 psi62%2757 fps99.5%
ADI AR 2219<<locked>>90%41,336 psi77%2953 fps95.7%
Alliant AR-Comp<<locked>>88%28,601 psi53%2683 fps95.8%
Alliant Reloder-10x18 gr82%29,617 psi55%2668 fps95.1%
Alliant Reloder-7<<locked>>80%35,099 psi65%2747 fps97.5%
Baschieri & Pellagri 106<<locked>>86%37,318 psi70%2751 fps95.2%
Hodgdon H322<<locked>>94%39,131 psi73%2904 fps95%
Hodgdon H335<<locked>>92%43,366 psi81%2988 fps95.1%
Hodgdon H4198<<locked>>86%40,698 psi76%2826 fps95%
Hodgdon TrailBoss<<locked>>80%22,887 psi43%1709 fps100%
IMR 4198<<locked>>80%30,298 psi56%2632 fps96.2%
IMR 4227<<locked>>80%40,712 psi76%2830 fps99.7%
Lovex S053<<locked>>80%40,103 psi75%2803 fps100%
Norma 20018.2 gr80%31,444 psi59%2704 fps96.7%
ReloadSwiss RS 14<<locked>>80%22,539 psi42%1746 fps100%
ReloadSwiss RS 36<<locked>>80%40,306 psi75%2858 fps99.6%
SNPE Vectan BA6 1/2<<locked>>80%37,405 psi70%2611 fps100%
SNPE Vectan SP 10<<locked>>92%44,280 psi83%3006 fps95.4%
SNPE Vectan SP 319.3 gr88%36,448 psi68%2822 fps95.3%
Somchem S335<<locked>>98%40,654 psi76%2853 fps95.3%
Vihtavuori N120<<locked>>80%31,430 psi59%2667 fps99.7%
Vihtavuori N130<<locked>>86%31,966 psi60%2669 fps95.7%
Vihtavuori N133<<locked>>94%33,460 psi62%2709 fps95%
Vihtavuori N135<<locked>>98%33,243 psi62%2789 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 29 powders for .222 Rem. loaded with the .224 | 56gr | RWS TMS. ADI AR 2219 delivers the highest muzzle velocity at 3,077 fps; across all powders the maximum-charge window runs from 1,899 fps to 3,077 fps. Accurate 2015 gives the best case fill at 100 %, and 29 of the 29 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (370 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. SNPE Vectan SP 3, Alliant Reloder-10x, Norma 200 rank at the top here: for .222 Rem. with the .224 | 56gr | RWS TMS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data