
Load Specifications
Load data in caliber .222 Rem. with .224 | 55gr | Lapua FMJ bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Norma 200, ADI AR 2207 and Alliant Reloder-10x.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 86% | 45,614 psi | 85% | 2936 fps | 98.9% |
| Accurate 2015ᴾ | <<locked>> | 100% | 43,627 psi | 81% | 2986 fps | 97.9% |
| Accurate LT-30 | <<locked>> | 92% | 46,079 psi | 86% | 2933 fps | 96.9% |
| ADI AR 2207 | <<locked>> | 92% | 47,442 psi | 88% | 3058 fps | 100% |
| ADI AR 2219 | <<locked>> | 94% | 46,383 psi | 86% | 3071 fps | 96.7% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 40,669 psi | 76% | 3015 fps | 99.3% |
| Alliant Reloder-10x | <<locked>> | 98% | 47,601 psi | 89% | 3087 fps | 99.3% |
| Alliant Reloder-7 | <<locked>> | 90% | 47,036 psi | 88% | 3012 fps | 99.5% |
| Baschieri & Pellagri 106 | <<locked>> | 94% | 47,268 psi | 88% | 2963 fps | 97.5% |
| Hodgdon H322 | <<locked>> | 98% | 47,776 psi | 89% | 3097 fps | 97.1% |
| Hodgdon H4198 | <<locked>> | 90% | 48,196 psi | 90% | 2989 fps | 96.7% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,995 psi | 58% | 1916 fps | 100% |
| IMR 4198 | <<locked>> | 96% | 46,760 psi | 87% | 3025 fps | 99.7% |
| IMR 4227 | <<locked>> | 86% | 47,848 psi | 89% | 2982 fps | 100% |
| Lovex S053 | <<locked>> | 86% | 46,833 psi | 87% | 2943 fps | 100% |
| Norma 200 | <<locked>> | 94% | 47,964 psi | 89% | 3077 fps | 99.7% |
| ReloadSwiss RS 36 | <<locked>> | 86% | 47,688 psi | 89% | 3015 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 90% | 47,659 psi | 89% | 2799 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 96% | 45,788 psi | 85% | 3035 fps | 97.6% |
| Vihtavuori N120 | <<locked>> | 92% | 47,616 psi | 89% | 3009 fps | 100% |
| Vihtavuori N130 | <<locked>> | 98% | 46,267 psi | 86% | 2989 fps | 99% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 42,366 psi | 79% | 2920 fps | 97.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 37,057 psi | 69% | 2762 fps | 97.2% |
| Accurate 2015 | <<locked>> | 92% | 34,055 psi | 63% | 2779 fps | 95.2% |
| Accurate LT-30 | <<locked>> | 88% | 40,698 psi | 76% | 2825 fps | 95.5% |
| ADI AR 2207 | 17.2 gr | 80% | 32,358 psi | 60% | 2749 fps | 99.1% |
| ADI AR 2219 | <<locked>> | 90% | 40,292 psi | 75% | 2946 fps | 95% |
| Alliant AR-Comp | <<locked>> | 88% | 27,847 psi | 52% | 2671 fps | 95% |
| Alliant Reloder-10x | 18.3 gr | 84% | 30,835 psi | 57% | 2720 fps | 95.3% |
| Alliant Reloder-7 | <<locked>> | 80% | 34,055 psi | 63% | 2740 fps | 97% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 38,841 psi | 72% | 2799 fps | 95.4% |
| Hodgdon H322 | <<locked>> | 94% | 41,452 psi | 77% | 2969 fps | 95.4% |
| Hodgdon H4198 | <<locked>> | 86% | 42,554 psi | 79% | 2881 fps | 95.3% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,495 psi | 42% | 1713 fps | 100% |
| IMR 4198 | <<locked>> | 80% | 29,399 psi | 55% | 2621 fps | 95.5% |
| IMR 4227 | <<locked>> | 80% | 40,176 psi | 75% | 2838 fps | 99.6% |
| Lovex S053 | <<locked>> | 80% | 38,928 psi | 73% | 2802 fps | 100% |
| Norma 200 | 18 gr | 80% | 30,429 psi | 57% | 2694 fps | 96% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 39,160 psi | 73% | 2854 fps | 99.4% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 36,376 psi | 68% | 2612 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 90% | 38,014 psi | 71% | 2874 fps | 95.5% |
| Vihtavuori N120 | <<locked>> | 80% | 32,576 psi | 61% | 2717 fps | 99.7% |
| Vihtavuori N130 | <<locked>> | 86% | 31,633 psi | 59% | 2674 fps | 95.3% |
| Vihtavuori N133 | <<locked>> | 94% | 35,360 psi | 66% | 2766 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for .222 Rem. loaded with the .224 | 55gr | Lapua FMJ. Hodgdon H322 delivers the highest muzzle velocity at 3,097 fps; across all powders the maximum-charge window runs from 1,916 fps to 3,097 fps. Accurate 2015 gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (370 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Norma 200, ADI AR 2207, Alliant Reloder-10x rank at the top here: for .222 Rem. with the .224 | 55gr | Lapua FMJ they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.