Load data for .222 Rem. + .224 | 55gr | Hornady S SX

.222 Rem. cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:55 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.7"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:27.9 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:53,664 psi

Load data in caliber .222 Rem. with .224 | 55gr | Hornady S SX bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, SNPE Vectan SP 3 and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%46,731 psi87%2966 fps99.2%
Accurate 2015ᴾ<<locked>>100%45,411 psi85%3028 fps98.4%
Accurate 2460<<locked>>98%47,413 psi88%3068 fps95.9%
Accurate LT-30<<locked>>92%47,166 psi88%2963 fps97.3%
ADI AR 2207<<locked>>90%45,527 psi85%3035 fps100%
ADI AR 2219<<locked>>94%47,427 psi88%3104 fps97.2%
Alliant AR-Compᴾ<<locked>>100%41,669 psi78%3048 fps99.6%
Alliant Reloder-10x<<locked>>96%46,253 psi86%3074 fps99.3%
Alliant Reloder-7<<locked>>90%47,659 psi89%3031 fps99.6%
Baschieri & Pellagri 106<<locked>>92%45,745 psi85%2946 fps97.4%
Hodgdon H322ᴾ<<locked>>100%47,427 psi88%3104 fps97.2%
Hodgdon H335<<locked>>94%46,833 psi87%3084 fps96%
Hodgdon H4198<<locked>>90%45,527 psi85%2953 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%30,705 psi57%1923 fps100%
IMR 4198<<locked>>96%48,037 psi90%3061 fps99.8%
IMR 4227<<locked>>84%45,977 psi86%2959 fps100%
Lovex S053<<locked>>86%47,718 psi89%2969 fps100%
Norma 200<<locked>>92%46,035 psi86%3051 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,661 psi57%1969 fps100%
ReloadSwiss RS 36<<locked>>86%48,385 psi90%3038 fps100%
SNPE Vectan BA6 1/2<<locked>>90%48,515 psi90%2822 fps100%
SNPE Vectan SP 10<<locked>>94%47,848 psi89%3100 fps96.2%
SNPE Vectan SP 3<<locked>>96%47,007 psi88%3071 fps98%
Somchem S335ᴾ<<locked>>100%42,873 psi80%2936 fps96%
Vihtavuori N120<<locked>>94%47,790 psi89%3018 fps100%
Vihtavuori N130<<locked>>98%45,934 psi86%2999 fps99.1%
Vihtavuori N133ᴾ<<locked>>100%39,972 psi74%2887 fps97.1%
Vihtavuori N135ᴾ<<locked>>100%35,563 psi66%2874 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%38,130 psi71%2799 fps97.7%
Accurate 2015<<locked>>92%35,157 psi66%2815 fps95.9%
Accurate 2460<<locked>>96%44,208 psi82%3009 fps95.1%
Accurate LT-30<<locked>>86%39,059 psi73%2802 fps95.2%
ADI AR 2207<<locked>>80%33,199 psi62%2779 fps99.4%
ADI AR 2219<<locked>>90%41,292 psi77%2982 fps95.6%
Alliant AR-Comp<<locked>>88%28,703 psi53%2710 fps95.8%
Alliant Reloder-10x18.3 gr82%29,820 psi56%2700 fps95.1%
Alliant Reloder-7<<locked>>80%35,244 psi66%2779 fps97.5%
Baschieri & Pellagri 106<<locked>>86%37,260 psi69%2779 fps95.1%
Hodgdon H322<<locked>>96%41,858 psi78%2995 fps95.8%
Hodgdon H335<<locked>>92%43,772 psi82%3025 fps95.2%
Hodgdon H4198<<locked>>86%40,843 psi76%2858 fps95%
Hodgdon TrailBoss<<locked>>80%22,902 psi43%1732 fps100%
IMR 4198<<locked>>80%30,066 psi56%2654 fps96%
IMR 4227<<locked>>80%40,988 psi76%2867 fps99.7%
Lovex S053<<locked>>80%39,813 psi74%2828 fps100%
Norma 20018.5 gr80%31,604 psi59%2736 fps96.7%
ReloadSwiss RS 14<<locked>>80%22,553 psi42%1768 fps100%
ReloadSwiss RS 36<<locked>>80%40,451 psi75%2890 fps99.6%
SNPE Vectan BA6 1/2<<locked>>80%37,246 psi69%2638 fps100%
SNPE Vectan SP 10<<locked>>92%44,730 psi83%3045 fps95.4%
SNPE Vectan SP 319.6 gr88%36,535 psi68%2851 fps95.2%
Somchem S335<<locked>>98%40,030 psi75%2881 fps95.2%
Vihtavuori N120<<locked>>80%31,212 psi58%2690 fps99.6%
Vihtavuori N130<<locked>>86%32,053 psi60%2697 fps95.7%
Vihtavuori N133<<locked>>96%35,346 psi66%2782 fps95.6%
Vihtavuori N135<<locked>>98%33,663 psi63%2825 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for .222 Rem. loaded with the .224 | 55gr | Hornady S SX. ADI AR 2219 delivers the highest muzzle velocity at 3,104 fps; across all powders the maximum-charge window runs from 1,923 fps to 3,104 fps. Accurate 2015 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (370 MPa), the top charges use 57–90 %, leaving at least 10 % headroom. Accurate 2015, Alliant AR-Comp, Hodgdon H322 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, SNPE Vectan SP 3, Norma 200 rank at the top here: for .222 Rem. with the .224 | 55gr | Hornady S SX they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data