Load data for .222 Rem. + .224 | 53gr | Barnes TSX BT

.222 Rem. cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:53 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.7"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:27.9 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:53,664 psi
Recommended Twist Rate:1:10.5

Load data in caliber .222 Rem. with .224 | 53gr | Barnes TSX BT bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Norma 200, ADI AR 2207 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%45,803 psi85%2986 fps98.6%
Accurate 2015ᴾ<<locked>>100%40,596 psi76%2976 fps96.8%
Accurate LT-30<<locked>>94%46,412 psi86%2982 fps96.4%
ADI AR 2205<<locked>>82%48,196 psi90%2933 fps100%
ADI AR 2207<<locked>>94%47,268 psi88%3107 fps100%
ADI AR 2219<<locked>>96%46,499 psi87%3117 fps96.2%
Alliant AR-Compᴾ<<locked>>100%37,608 psi70%2989 fps98.4%
Alliant Reloder-10xᴾ<<locked>>100%47,355 psi88%3133 fps99.1%
Alliant Reloder-7<<locked>>92%46,876 psi87%3058 fps99.2%
Baschieri & Pellagri 106<<locked>>96%47,558 psi89%3009 fps97.1%
Hodgdon H322ᴾ<<locked>>100%47,181 psi88%3130 fps96.4%
Hodgdon H4198<<locked>>92%48,559 psi90%3041 fps96.2%
Hodgdon TrailBossᴾ<<locked>>100%30,168 psi56%1939 fps100%
IMR 4198<<locked>>98%46,978 psi88%3077 fps99.5%
IMR 4227<<locked>>88%48,196 psi90%3038 fps100%
Lovex D060<<locked>>82%48,414 psi90%3081 fps99.4%
Lovex S053<<locked>>88%46,876 psi87%2999 fps100%
Norma 200<<locked>>96%47,384 psi88%3120 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%29,443 psi55%1975 fps100%
ReloadSwiss RS 36<<locked>>88%47,761 psi89%3068 fps99.9%
Shooters World Buffalo Rifle<<locked>>82%48,414 psi90%3081 fps99.4%
SNPE Vectan BA6 1/2<<locked>>92%47,892 psi89%2858 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%48,501 psi90%3130 fps97.6%
Vihtavuori N110<<locked>>82%45,876 psi85%2913 fps100%
Vihtavuori N120<<locked>>94%47,442 psi88%3061 fps100%
Vihtavuori N130ᴾ<<locked>>100%45,527 psi85%3025 fps98.5%
Vihtavuori N133ᴾ<<locked>>100%39,407 psi73%2900 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%34,824 psi65%2756 fps96.1%
Accurate 2015<<locked>>96%35,447 psi66%2861 fps95.2%
Accurate LT-30<<locked>>92%43,830 psi82%2933 fps95.8%
ADI AR 2205<<locked>>80%45,469 psi85%2890 fps100%
ADI AR 220717 gr80%29,863 psi56%2733 fps98.2%
ADI AR 2219<<locked>>94%43,250 psi81%3051 fps95.3%
Alliant AR-Comp<<locked>>92%29,356 psi55%2762 fps95.1%
Alliant Reloder-10x<<locked>>88%32,053 psi60%2805 fps95.3%
Alliant Reloder-7<<locked>>80%31,604 psi59%2726 fps95.6%
Baschieri & Pellagri 106<<locked>>92%41,481 psi77%2897 fps95.6%
Hodgdon H322<<locked>>98%44,556 psi83%3077 fps95.7%
Hodgdon H4198<<locked>>90%45,194 psi84%2976 fps95.4%
Hodgdon TrailBoss<<locked>>80%21,640 psi40%1729 fps100%
IMR 4198<<locked>>84%30,893 psi58%2710 fps95.6%
IMR 4227<<locked>>80%37,884 psi71%2838 fps99%
Lovex D060<<locked>>80%45,730 psi85%3028 fps99.1%
Lovex S053<<locked>>80%36,521 psi68%2802 fps100%
Norma 20018.3 gr82%29,863 psi56%2733 fps95.3%
ReloadSwiss RS 14<<locked>>80%21,654 psi40%1778 fps100%
ReloadSwiss RS 3617.7 gr80%36,738 psi68%2851 fps98.7%
Shooters World Buffalo Rifle<<locked>>80%45,730 psi85%3028 fps99.1%
SNPE Vectan BA6 1/2<<locked>>80%34,055 psi63%2621 fps100%
SNPE Vectan SP 3<<locked>>94%40,059 psi75%2966 fps95.5%
Vihtavuori N110<<locked>>80%43,105 psi80%2867 fps100%
Vihtavuori N120<<locked>>80%30,168 psi56%2710 fps99.2%
Vihtavuori N130<<locked>>90%33,489 psi62%2769 fps95.4%
Vihtavuori N133<<locked>>98%37,173 psi69%2851 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .222 Rem. loaded with the .224 | 53gr | Barnes TSX BT. Alliant Reloder-10x delivers the highest muzzle velocity at 3,133 fps; across all powders the maximum-charge window runs from 1,939 fps to 3,133 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (370 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 53.0 gr projectile in 0.224" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Norma 200, ADI AR 2207, ReloadSwiss RS 36 rank at the top here: for .222 Rem. with the .224 | 53gr | Barnes TSX BT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data