top of page

Load data for .222 Rem. + .224 | 52gr | MEN SPBT Match

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.222 Rem. + .224 | 52gr | MEN SPBT Match

Load Specifications

Bullet:
.224 | 52gr | MEN SPBT Match
Bullet Weight:
52gr | 3.4g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.222 Rem.
Case Length (l3):
1.700" | 43.2mm
Cartridge Length (C.O.L.):
2.098" | 53.3mm
Seated Depth:
0.602" | 15.3mm
Shank Seated Depth:
0.602" | 15.3mm
Case Capacity:
27.9 Grains of Water | 1.81 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
53664 psi | 3700 bar
LID:
LID_B3772_C128

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .222 Rem. with .224 | 52gr | MEN SPBT Match bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 7.9 fps

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
96%
44382
83%
**18
100%
[ADI AR 2219]*
<<locked>>
97%
42859
80%
**76
93%
Accurate 1680
<<locked>>
87%
46441
87%
**69
95%
[Accurate 2015]*
<<locked>>
97%
33852
63%
**82
93%
[Alliant AR-Comp]*
<<locked>>
96%
29414
55%
**90
93%
Alliant Reloder-10x
<<locked>>
96%
36419
68%
**58
95%
Alliant Reloder-7
<<locked>>
96%
47398
88%
**09
98%
[Baschieri & Pellagri 106]*
<<locked>>
97%
43714
81%
**81
94%
[Hodgdon H4198]*
<<locked>>
96%
46398
86%
**36
94%
Hodgdon TrailBoss
<<locked>>
95%
27485
51%
**37
100%
IMR 4198
<<locked>>
96%
40785
76%
**94
97%
IMR 4227 👍
<<locked>>
89%
46354
86%
**53
99%
Lovex S053 👍
<<locked>>
91%
46876
87%
**56
100%
Norma 200
<<locked>>
97%
43178
80%
**92
98%
ReloadSwiss RS 14
<<locked>>
93%
26397
49%
**60
100%
ReloadSwiss RS 36 👍
<<locked>>
90%
46398
86%
**99
99%
SNPE Vectan BA6 1/2
<<locked>>
94%
46601
87%
**05
100%
Vihtavuori N110
<<locked>>
85%
45977
86%
**84
100%
Vihtavuori N120 👍
<<locked>>
96%
42076
78%
**30
100%
[Vihtavuori N130]*
<<locked>>
96%
34911
65%
**56
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
27949
52%
**35
96%
[ADI AR 2219]*
<<locked>>
92%
37057
69%
**41
91%
[Accurate 1680]*
<<locked>>
81%
37927
71%
**95
93%
[Accurate 2015]*
<<locked>>
92%
28892
54%
**44
91%
[Alliant AR-Comp]*
<<locked>>
92%
26774
50%
**98
91%
[Alliant Reloder-10x]*
<<locked>>
86%
26731
50%
**02
91%
[Alliant Reloder-7]*
<<locked>>
81%
30052
56%
**31
93%
[Baschieri & Pellagri 106]*
<<locked>>
88%
33243
62%
**48
90%
[Hodgdon H4198]*
<<locked>>
88%
36492
68%
**26
90%
Hodgdon TrailBoss
<<locked>>
82%
22147
41%
**03
100%
[IMR 4198]*
<<locked>>
81%
26310
49%
**07
91%
IMR 4227
<<locked>>
81%
35911
67%
**43
98%
Lovex S053
<<locked>>
81%
34621
65%
**17
100%
[Norma 200]*
<<locked>>
81%
26049
49%
**72
92%
ReloadSwiss RS 14
<<locked>>
80%
21234
40%
**26
100%
ReloadSwiss RS 36
<<locked>>
81%
34548
64%
**49
97%
SNPE Vectan BA6 1/2
<<locked>>
81%
32721
61%
**56
100%
Vihtavuori N110
<<locked>>
81%
41234
77%
**05
100%
Vihtavuori N120
<<locked>>
81%
26716
50%
**62
97%
[Vihtavuori N130]*
<<locked>>
87%
27354
51%
**49
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page