
Load Specifications
Load data in caliber .222 Rem. with .224 | 45gr | Lehigh Defense Controlled Chaos bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, ReloadSwiss RS 36 and Norma 200.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 92% | 48,370 psi | 90% | 3222 fps | 97.7% |
| Accurate 5744 | <<locked>> | 82% | 47,630 psi | 89% | 3274 fps | 98.2% |
| ADI AR 2205 | <<locked>> | 84% | 48,153 psi | 90% | 3146 fps | 100% |
| ADI AR 2207 | <<locked>> | 96% | 45,237 psi | 84% | 3291 fps | 99.8% |
| Alliant Reloder-10xᴾ | <<locked>> | 100% | 42,554 psi | 79% | 3241 fps | 96.7% |
| Alliant Reloder-7 | <<locked>> | 96% | 47,877 psi | 89% | 3278 fps | 98.2% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 29,240 psi | 54% | 2083 fps | 100% |
| IMR 4198ᴾ | <<locked>> | 100% | 45,455 psi | 85% | 3248 fps | 98.1% |
| IMR 4227 | <<locked>> | 90% | 46,949 psi | 87% | 3225 fps | 99.3% |
| Lovex D060 | <<locked>> | 84% | 48,283 psi | 90% | 3287 fps | 98.3% |
| Lovex D063 | <<locked>> | 82% | 45,716 psi | 85% | 3179 fps | 98.5% |
| Lovex S053 | <<locked>> | 92% | 48,327 psi | 90% | 3245 fps | 100% |
| Norma 200 | <<locked>> | 98% | 45,237 psi | 84% | 3281 fps | 98% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 29,008 psi | 54% | 2136 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 90% | 46,180 psi | 86% | 3248 fps | 99.1% |
| Shooters World Buffalo Rifle | <<locked>> | 84% | 48,283 psi | 90% | 3287 fps | 98.3% |
| Shooters World SOCOM | <<locked>> | 82% | 45,716 psi | 85% | 3179 fps | 98.5% |
| SNPE Vectan BA6 1/2 | <<locked>> | 94% | 46,238 psi | 86% | 3054 fps | 100% |
| Vihtavuori N110 | <<locked>> | 86% | 47,863 psi | 89% | 3186 fps | 100% |
| Vihtavuori N120ᴾ | <<locked>> | 100% | 47,630 psi | 89% | 3281 fps | 100% |
| Vihtavuori N130ᴾ | <<locked>> | 100% | 40,466 psi | 75% | 3117 fps | 95.7% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 86% | 39,146 psi | 73% | 3038 fps | 95.4% |
| Accurate 5744 | <<locked>> | 80% | 45,005 psi | 84% | 3219 fps | 97.7% |
| ADI AR 2205 | <<locked>> | 80% | 42,424 psi | 79% | 3041 fps | 100% |
| ADI AR 2207 | 17.1 gr | 80% | 27,253 psi | 51% | 2838 fps | 95.3% |
| Alliant Reloder-10x | <<locked>> | 96% | 37,217 psi | 69% | 3123 fps | 95.1% |
| Alliant Reloder-7 | <<locked>> | 88% | 37,623 psi | 70% | 3061 fps | 95.7% |
| Hodgdon TrailBoss | <<locked>> | 80% | 21,509 psi | 40% | 1873 fps | 100% |
| IMR 4198 | <<locked>> | 92% | 36,376 psi | 68% | 3038 fps | 95.5% |
| IMR 4227 | <<locked>> | 80% | 34,940 psi | 65% | 2959 fps | 96.8% |
| Lovex D060 | <<locked>> | 80% | 42,554 psi | 79% | 3163 fps | 97.1% |
| Lovex D063 | <<locked>> | 80% | 42,554 psi | 79% | 3117 fps | 97.9% |
| Lovex S053 | <<locked>> | 80% | 33,707 psi | 63% | 2936 fps | 99.1% |
| Norma 200 | 20.1 gr | 90% | 34,911 psi | 65% | 3051 fps | 95.2% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 21,031 psi | 39% | 1913 fps | 100% |
| ReloadSwiss RS 36 | 17.8 gr | 80% | 33,692 psi | 63% | 2966 fps | 96.2% |
| Shooters World Buffalo Rifle | <<locked>> | 80% | 42,554 psi | 79% | 3163 fps | 97.1% |
| Shooters World SOCOM | <<locked>> | 80% | 42,554 psi | 79% | 3117 fps | 97.9% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 31,662 psi | 59% | 2772 fps | 100% |
| Vihtavuori N110 | <<locked>> | 80% | 39,827 psi | 74% | 3041 fps | 100% |
| Vihtavuori N120 | <<locked>> | 80% | 25,744 psi | 48% | 2753 fps | 96% |
| Vihtavuori N130 | <<locked>> | 98% | 38,232 psi | 71% | 3068 fps | 95% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 21 powders for .222 Rem. loaded with the .224 | 45gr | Lehigh Defense Controlled Chaos. ADI AR 2207 delivers the highest muzzle velocity at 3,291 fps; across all powders the maximum-charge window runs from 2,083 fps to 3,291 fps. Alliant Reloder-10x gives the best case fill at 100 %, and 21 of the 21 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (370 MPa), the top charges use 54–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.224" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-10x, Hodgdon TrailBoss, IMR 4198 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, ReloadSwiss RS 36, Norma 200 rank at the top here: for .222 Rem. with the .224 | 45gr | Lehigh Defense Controlled Chaos they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.