top of page

Load data for .222 Rem. Mag. + .224 | 45gr | Impala RNFP KO

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.222 Rem. Mag. + .224 | 45gr | Impala RNFP KO

Load Specifications

Bullet:
.224 | 45gr | Impala RNFP KO
Bullet Weight:
45gr | 2.9g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.692" | 17.6mm
Caliber:
.222 Rem. Mag.
Case Length (l3):
1.850" | 47.0mm
Cartridge Length (C.O.L.):
2.246" | 57.0mm
Seated Depth:
0.296" | 7.5mm
Shank Seated Depth:
0.296" | 7.5mm
Case Capacity:
30.5 Grains of Water | 1.98 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
58740 psi | 4050 bar
LID:
LID_B2959_C130

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 62 loads in caliber .222 Rem. Mag. with .224 | 45gr | Impala RNFP KO bullet and 31 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
94%
51837
88%
**32
100%
ADI AR 2219
<<locked>>
96%
51213
87%
**35
96%
Accurate 1680
<<locked>>
86%
52127
89%
**76
97%
Accurate 2015
<<locked>>
97%
42279
72%
**32
97%
[Accurate 2495]*
<<locked>>
97%
34447
59%
**36
94%
Alliant AR-Comp
<<locked>>
96%
36854
63%
**73
97%
Alliant Reloder-10x
<<locked>>
97%
46760
80%
**56
98%
Alliant Reloder-7 👍
<<locked>>
92%
51358
87%
**69
99%
Baschieri & Pellagri 106
<<locked>>
97%
52359
89%
**20
97%
[Hodgdon CFE BLK]*
<<locked>>
92%
52054
89%
**94
92%
[Hodgdon H322]*
<<locked>>
96%
41147
70%
**19
93%
Hodgdon H335
<<locked>>
96%
50328
86%
**06
95%
Hodgdon H4198
<<locked>>
95%
52794
90%
**56
96%
Hodgdon TrailBoss
<<locked>>
96%
29327
50%
**13
100%
IMR 4198 👍
<<locked>>
96%
48008
82%
**33
99%
IMR 4227
<<locked>>
88%
51314
87%
**33
100%
[Lovex D073.4]*
<<locked>>
97%
49211
84%
**20
92%
Lovex S053
<<locked>>
89%
52228
89%
**40
100%
Norma 200 👍
<<locked>>
96%
51822
88%
**28
99%
ReloadSwiss RS 14
<<locked>>
96%
29066
49%
**59
100%
ReloadSwiss RS 36
<<locked>>
89%
52736
90%
**96
100%
[ReloadSwiss RS 40]*
<<locked>>
97%
46006
78%
**91
92%
[Rottweil R 901]*
<<locked>>
97%
40959
70%
**73
92%
SNPE Vectan BA6 1/2
<<locked>>
93%
51808
88%
**59
100%
SNPE Vectan SP 10
<<locked>>
97%
51996
89%
**35
95%
[SNPE Vectan Tubal 3000]*
<<locked>>
96%
39697
68%
**84
91%
[Somchem S335]*
<<locked>>
97%
39001
66%
**97
93%
Vihtavuori N110
<<locked>>
84%
52112
89%
**71
100%
Vihtavuori N120 👍
<<locked>>
96%
50227
86%
**43
100%
Vihtavuori N130
<<locked>>
97%
44541
76%
**25
98%
[Vihtavuori N133]*
<<locked>>
97%
36738
63%
**54
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
34592
59%
**74
99%
[ADI AR 2219]*
<<locked>>
85%
34809
59%
**51
90%
Accurate 1680
<<locked>>
81%
44643
76%
**25
96%
[Accurate 2015]*
<<locked>>
83%
27383
47%
**28
90%
[Accurate 2495]*
<<locked>>
91%
27847
47%
**43
90%
[Alliant AR-Comp]*
<<locked>>
84%
25425
43%
**95
90%
[Alliant Reloder-10x]*
<<locked>>
81%
29095
50%
**07
92%
Alliant Reloder-7
<<locked>>
81%
36608
62%
**54
96%
[Baschieri & Pellagri 106]*
<<locked>>
81%
31691
54%
**58
90%
[Hodgdon CFE BLK]*
<<locked>>
89%
46804
80%
**96
90%
[Hodgdon H322]*
<<locked>>
90%
34287
58%
**41
90%
[Hodgdon H335]*
<<locked>>
87%
37333
64%
**10
90%
[Hodgdon H4198]*
<<locked>>
81%
34592
59%
**46
90%
Hodgdon TrailBoss
<<locked>>
81%
23438
40%
**52
100%
[IMR 4198]*
<<locked>>
81%
31430
54%
**27
94%
IMR 4227
<<locked>>
81%
41916
71%
**59
99%
[Lovex D073.4]*
<<locked>>
94%
43250
74%
**05
91%
Lovex S053
<<locked>>
81%
41452
71%
**36
100%
Norma 200
<<locked>>
81%
32967
56%
**05
95%
ReloadSwiss RS 14
<<locked>>
81%
23395
40%
**98
100%
ReloadSwiss RS 36
<<locked>>
81%
41597
71%
**82
99%
[ReloadSwiss RS 40]*
<<locked>>
93%
40886
70%
**79
90%
[Rottweil R 901]*
<<locked>>
94%
37927
65%
**00
91%
SNPE Vectan BA6 1/2
<<locked>>
81%
37898
65%
**23
100%
[SNPE Vectan SP 10]*
<<locked>>
86%
36999
63%
**10
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
94%
36724
63%
**12
90%
[Somchem S335]*
<<locked>>
92%
33489
57%
**53
90%
Vihtavuori N110
<<locked>>
81%
48341
82%
**09
100%
Vihtavuori N120
<<locked>>
81%
32387
55%
**69
99%
[Vihtavuori N130]*
<<locked>>
81%
27920
48%
**99
91%
[Vihtavuori N133]*
<<locked>>
89%
29298
50%
**31
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page