Load data for .222 Rem. Mag. + .224 | 45gr | Fox Classic Hunter

.222 Rem. Mag. cartridge drawing
Fox Bullets logo

Load Specifications

Bullet Manufacturer:Fox Bullets
Bullet Weight:45 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.85"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30.5 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:26"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:10.5

Load data in caliber .222 Rem. Mag. with .224 | 45gr | Fox Classic Hunter bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, ReloadSwiss RS 36 and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%52,518 psi89%3389 fps99.2%
Accurate 2015ᴾ<<locked>>100%40,625 psi69%3255 fps96.3%
Accurate LT-30<<locked>>98%52,489 psi89%3376 fps97.2%
ADI AR 2205<<locked>>84%51,488 psi88%3284 fps100%
ADI AR 2207<<locked>>96%49,937 psi85%3458 fps100%
ADI AR 2219ᴾ<<locked>>100%53,084 psi90%3530 fps97.2%
Alliant AR-Compᴾ<<locked>>100%38,014 psi65%3278 fps98%
Alliant Reloder-10xᴾ<<locked>>100%47,297 psi81%3432 fps98.8%
Alliant Reloder-7<<locked>>96%52,750 psi90%3458 fps99.6%
Baschieri & Pellagri 106<<locked>>98%50,662 psi86%3340 fps97.3%
Hodgdon H322ᴾ<<locked>>100%47,718 psi81%3428 fps96%
Hodgdon H4198<<locked>>94%51,053 psi87%3376 fps96.2%
Hodgdon TrailBossᴾ<<locked>>100%30,095 psi51%2165 fps100%
IMR 4198ᴾ<<locked>>100%49,458 psi84%3425 fps99.5%
IMR 4227<<locked>>90%51,140 psi87%3396 fps100%
Lovex D060<<locked>>84%51,198 psi87%3445 fps99.5%
Lovex S053<<locked>>92%51,996 psi89%3386 fps100%
Norma 200<<locked>>98%50,894 psi87%3478 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%29,370 psi50%2205 fps100%
ReloadSwiss RS 36<<locked>>90%50,676 psi86%3422 fps99.9%
Shooters World Buffalo Rifle<<locked>>84%51,198 psi87%3445 fps99.5%
Shooters World SOCOM<<locked>>84%52,678 psi90%3399 fps99.9%
SNPE Vectan BA6 1/2<<locked>>96%52,794 psi90%3225 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%48,254 psi82%3422 fps97.1%
Vihtavuori N110<<locked>>86%51,155 psi87%3301 fps100%
Vihtavuori N120<<locked>>96%50,111 psi85%3406 fps100%
Vihtavuori N130ᴾ<<locked>>100%45,542 psi78%3310 fps98.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,056 psi60%3031 fps95.6%
Accurate 2015<<locked>>98%37,884 psi64%3192 fps95.4%
Accurate LT-30<<locked>>92%43,801 psi75%3212 fps95.2%
ADI AR 2205<<locked>>80%45,208 psi77%3179 fps100%
ADI AR 220718.6 gr80%30,008 psi51%3015 fps97.8%
ADI AR 2219<<locked>>96%46,441 psi79%3406 fps95.7%
Alliant AR-Comp<<locked>>94%31,198 psi53%3081 fps95.4%
Alliant Reloder-10x<<locked>>90%34,142 psi58%3136 fps95.5%
Alliant Reloder-7<<locked>>80%32,024 psi55%3005 fps95.1%
Baschieri & Pellagri 106<<locked>>92%41,568 psi71%3169 fps95.1%
Hodgdon H322<<locked>>98%44,643 psi76%3366 fps95.1%
Hodgdon H4198<<locked>>92%48,443 psi82%3330 fps95.6%
Hodgdon TrailBoss<<locked>>80%21,886 psi37%1942 fps100%
IMR 4198<<locked>>86%33,069 psi56%3045 fps95.8%
IMR 4227<<locked>>80%37,434 psi64%3117 fps98.5%
Lovex D060<<locked>>80%45,527 psi78%3330 fps98.7%
Lovex S053<<locked>>80%36,840 psi63%3097 fps99.9%
Norma 20020.5 gr84%32,372 psi55%3071 fps95.7%
ReloadSwiss RS 14<<locked>>80%21,408 psi36%1982 fps100%
ReloadSwiss RS 3619.4 gr80%36,941 psi63%3140 fps98.3%
Shooters World Buffalo Rifle<<locked>>80%45,527 psi78%3330 fps98.7%
Shooters World SOCOM<<locked>>80%46,180 psi79%3284 fps99.3%
SNPE Vectan BA6 1/2<<locked>>80%34,069 psi58%2897 fps100%
SNPE Vectan SP 3<<locked>>96%42,844 psi73%3310 fps95.8%
Vihtavuori N110<<locked>>80%43,265 psi74%3173 fps100%
Vihtavuori N120<<locked>>80%30,269 psi52%2986 fps98.8%
Vihtavuori N130<<locked>>92%35,882 psi61%3097 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .222 Rem. Mag. loaded with the .224 | 45gr | Fox Classic Hunter. ADI AR 2219 delivers the highest muzzle velocity at 3,530 fps; across all powders the maximum-charge window runs from 2,165 fps to 3,530 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 50–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.224" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, ADI AR 2219, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, ReloadSwiss RS 36, Norma 200 rank at the top here: for .222 Rem. Mag. with the .224 | 45gr | Fox Classic Hunter they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data