Load data for .222 Rem. Mag. + .224 | 40gr | Rhino Penetrator

.222 Rem. Mag. cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:40 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.85"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30.5 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:26"
Max. allowed Pressure:58,740 psi

Load data in caliber .222 Rem. Mag. with .224 | 40gr | Rhino Penetrator bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, ADI AR 2207 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>92%50,705 psi86%3527 fps98.5%
Accurate LT-30<<locked>>98%50,792 psi86%3510 fps96%
Accurate No. 11 FS<<locked>>82%52,446 psi89%3573 fps100%
ADI AR 2205<<locked>>86%52,866 psi90%3491 fps100%
ADI AR 2207<<locked>>98%51,503 psi88%3668 fps100%
ADI AR 2219ᴾ<<locked>>100%51,227 psi87%3661 fps95.9%
Alliant AR-Compᴾ<<locked>>100%36,376 psi62%3383 fps96.5%
Alliant Reloder-10xᴾ<<locked>>100%45,397 psi77%3563 fps97.8%
Alliant Reloder-7<<locked>>96%50,995 psi87%3602 fps99%
Baschieri & Pellagri 106ᴾ<<locked>>100%52,547 psi89%3530 fps96.9%
Hodgdon H4198<<locked>>96%52,823 psi90%3576 fps95.7%
Hodgdon TrailBossᴾ<<locked>>100%29,341 psi50%2297 fps100%
IMR 4198ᴾ<<locked>>100%48,109 psi82%3570 fps98.9%
IMR 4227<<locked>>92%52,910 psi90%3606 fps99.9%
Lovex D060<<locked>>84%50,082 psi85%3606 fps98.9%
Lovex D063<<locked>>82%53,069 psi90%3619 fps99.3%
Lovex S053<<locked>>92%50,343 psi86%3547 fps100%
Norma 200ᴾ<<locked>>100%51,996 psi89%3671 fps99.3%
ReloadSwiss RS 14ᴾ<<locked>>100%29,008 psi49%2349 fps100%
ReloadSwiss RS 36<<locked>>92%51,808 psi88%3622 fps99.8%
Shooters World Blackout<<locked>>82%53,069 psi90%3619 fps99.3%
Shooters World Buffalo Rifle<<locked>>84%50,082 psi85%3606 fps98.9%
Shooters World SOCOM<<locked>>84%50,778 psi86%3543 fps99.4%
SNPE Vectan BA6 1/2<<locked>>96%50,865 psi87%3383 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%46,398 psi79%3550 fps95.8%
Vihtavuori N110<<locked>>88%52,924 psi90%3520 fps100%
Vihtavuori N120<<locked>>98%51,619 psi88%3609 fps100%
Vihtavuori N130ᴾ<<locked>>100%43,801 psi75%3438 fps97.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%38,392 psi65%3271 fps95.7%
Accurate LT-30<<locked>>96%47,732 psi81%3451 fps95.3%
Accurate No. 11 FS<<locked>>80%48,602 psi83%3507 fps100%
ADI AR 2205<<locked>>80%43,772 psi75%3330 fps100%
ADI AR 220719.4 gr80%28,703 psi49%3133 fps96.4%
ADI AR 2219<<locked>>98%48,008 psi82%3596 fps95.1%
Alliant AR-Comp<<locked>>98%34,113 psi58%3317 fps95.6%
Alliant Reloder-10x<<locked>>94%37,304 psi64%3376 fps95.6%
Alliant Reloder-721.1 gr84%34,809 psi59%3241 fps95.2%
Baschieri & Pellagri 106<<locked>>96%46,006 psi78%3412 fps95.4%
Hodgdon H4198<<locked>>94%49,574 psi84%3517 fps95%
Hodgdon TrailBoss<<locked>>80%21,538 psi37%2073 fps100%
IMR 4198<<locked>>88%33,852 psi58%3225 fps95%
IMR 4227<<locked>>80%36,201 psi62%3251 fps97.5%
Lovex D060<<locked>>80%44,164 psi75%3478 fps97.8%
Lovex D063<<locked>>80%49,792 psi85%3560 fps99%
Lovex S053<<locked>>80%35,157 psi60%3228 fps99.5%
Norma 200<<locked>>88%34,795 psi59%3297 fps95.6%
ReloadSwiss RS 14<<locked>>80%21,031 psi36%2113 fps100%
ReloadSwiss RS 3620.2 gr80%35,331 psi60%3264 fps97.2%
Shooters World Blackout<<locked>>80%49,792 psi85%3560 fps99%
Shooters World Buffalo Rifle<<locked>>80%44,164 psi75%3478 fps97.8%
Shooters World SOCOM<<locked>>80%44,744 psi76%3428 fps98.7%
SNPE Vectan BA6 1/2<<locked>>80%32,837 psi56%3045 fps100%
SNPE Vectan SP 3<<locked>>98%44,121 psi75%3501 fps95.1%
Vihtavuori N110<<locked>>80%41,466 psi71%3327 fps100%
Vihtavuori N120<<locked>>80%28,935 psi49%3104 fps97.7%
Vihtavuori N130<<locked>>94%36,593 psi62%3271 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for .222 Rem. Mag. loaded with the .224 | 40gr | Rhino Penetrator. Norma 200 delivers the highest muzzle velocity at 3,671 fps; across all powders the maximum-charge window runs from 2,297 fps to 3,671 fps. ADI AR 2219 gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. ADI AR 2219, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, ADI AR 2207, Alliant Reloder-7 rank at the top here: for .222 Rem. Mag. with the .224 | 40gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data