top of page

Load data for .221 Rem. Fireball + .224 | 53gr | Nosler Varmageddon FB

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): Lovex S053

.221 Rem. Fireball + .224 | 53gr | Nosler Varmageddon FB

Load Specifications

Bullet:
.224 | 53gr | Nosler Varmageddon FB
Manufacturer SKU:
36523
Bullet Weight:
53gr | 3.4g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.830" | 21.1mm
Caliber:
.221 Rem. Fireball load data
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.424" | 10.8mm
Shank Seated Depth:
0.424" | 10.8mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B3960_C125
Last updated:
2025-01-01

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .221 Rem. Fireball with .224 | 53gr | Nosler Varmageddon FB bullet and 13 powders such as Lovex S053. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
97%
36579
79%
**26
98%
[Alliant Reloder-7]*
<<locked>>
96%
39131
84%
**07
94%
[IMR 4198]*
<<locked>>
96%
33417
72%
**62
92%
IMR 4227
<<locked>>
92%
41365
89%
**07
97%
Lovex D060
<<locked>>
83%
39624
85%
**84
95%
Lovex S053 👍
<<locked>>
93%
41539
90%
**26
100%
[Norma 200]*
<<locked>>
96%
32851
71%
**38
93%
ReloadSwiss RS 14
<<locked>>
93%
24540
53%
**16
100%
ReloadSwiss RS 36
<<locked>>
93%
41147
89%
**49
97%
SNPE Vectan BA6 1/2
<<locked>>
95%
40422
87%
**85
100%
Shooters World Buffalo Rifle
<<locked>>
83%
39624
85%
**84
95%
Vihtavuori N110
<<locked>>
86%
39421
85%
**51
100%
Vihtavuori N120
<<locked>>
96%
33649
72%
**18
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2207]*
<<locked>>
81%
22713
49%
**29
91%
[Alliant Reloder-7]*
<<locked>>
87%
28892
62%
**67
90%
[IMR 4198]*
<<locked>>
91%
29834
64%
**70
90%
[IMR 4227]*
<<locked>>
81%
30211
65%
**57
93%
[Lovex D060]*
<<locked>>
81%
37478
81%
**35
94%
Lovex S053
<<locked>>
81%
28616
62%
**41
97%
[Norma 200]*
<<locked>>
90%
27499
59%
**97
90%
ReloadSwiss RS 14
<<locked>>
88%
22582
49%
**63
100%
[ReloadSwiss RS 36]*
<<locked>>
81%
28834
62%
**64
93%
SNPE Vectan BA6 1/2
<<locked>>
81%
27949
60%
**39
100%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
37478
81%
**35
94%
Vihtavuori N110
<<locked>>
81%
34301
74%
**56
100%
[Vihtavuori N120]*
<<locked>>
81%
22133
48%
**80
92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page