top of page

Load data for .221 Rem. Fireball + .224 | 50gr | Hornady V-MAX

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.221 Rem. Fireball + .224 | 50gr | Hornady V-MAX

Load Specifications

Bullet:
.224 | 50gr | Hornady V-MAX
Manufacturer SKU:
22261
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.800" | 20.3mm
Caliber:
.221 Rem. Fireball
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.394" | 10.0mm
Shank Seated Depth:
0.335" | 8.5mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B2508_C125
Recommended Twist Rate:
1:10 - 1:8

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .221 Rem. Fireball with .224 | 50gr | Hornady V-MAX bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
84%
40640
88%
**94
99%
ADI AR 2207
<<locked>>
97%
35694
77%
**85
97%
[Alliant Reloder-7]*
<<locked>>
96%
38087
82%
**62
93%
Hodgdon TrailBoss
<<locked>>
93%
24860
54%
**32
100%
IMR 4227
<<locked>>
91%
39175
84%
**49
96%
Lovex D060
<<locked>>
85%
41481
89%
**02
95%
Lovex S053 👍
<<locked>>
94%
40901
88%
**95
99%
ReloadSwiss RS 14
<<locked>>
97%
25599
55%
**04
100%
ReloadSwiss RS 36
<<locked>>
94%
41510
89%
**38
97%
SNPE Vectan BA6 1/2
<<locked>>
97%
41147
89%
**84
100%
Shooters World Buffalo Rifle
<<locked>>
85%
41481
89%
**02
95%
Vihtavuori N110
<<locked>>
87%
40118
86%
**53
100%
Vihtavuori N120
<<locked>>
95%
31821
69%
**51
97%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
36129
78%
**98
98%
[ADI AR 2207]*
<<locked>>
83%
23438
51%
**31
91%
[Alliant Reloder-7]*
<<locked>>
91%
31836
69%
**21
91%
Hodgdon TrailBoss
<<locked>>
88%
22698
49%
**80
100%
[IMR 4227]*
<<locked>>
81%
28993
62%
**97
92%
[Lovex D060]*
<<locked>>
81%
36927
80%
**00
93%
Lovex S053
<<locked>>
81%
28355
61%
**07
96%
ReloadSwiss RS 14
<<locked>>
81%
19682
42%
**47
100%
[ReloadSwiss RS 36]*
<<locked>>
81%
27296
59%
**97
91%
SNPE Vectan BA6 1/2
<<locked>>
81%
26760
58%
**88
100%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
36927
80%
**00
93%
Vihtavuori N110
<<locked>>
81%
32953
71%
**05
100%
[Vihtavuori N120]*
<<locked>>
81%
21161
46%
**06
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page