top of page

Load data for .221 Rem. Fireball + .224 | 50gr | Barnes VG

Recommended Powder(s): Lovex S053

.221 Rem. Fireball + .224 | 50gr | Barnes VG

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 50gr | Barnes VG
Manufacturer SKU:
30198
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.858" | 21.8mm
Caliber:
.221 Rem. Fireball load data
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.452" | 11.5mm
Shank Seated Depth:
0.452" | 11.5mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B444_C125
Last updated:
2025-01-01

Load data for 26 loads in caliber .221 Rem. Fireball with .224 | 50gr | Barnes VG bullet and 13 powders such as Lovex S053. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
85%
40944
88%
**74
99%
ADI AR 2207
<<locked>>
95%
32764
71%
**90
95%
[Alliant Reloder-7]*
<<locked>>
97%
37057
80%
**23
93%
Hodgdon TrailBoss
<<locked>>
94%
24758
53%
**19
100%
IMR 4227
<<locked>>
93%
40930
88%
**56
96%
[Lovex D060]*
<<locked>>
85%
40350
87%
**49
94%
Lovex S053 👍
<<locked>>
94%
39291
85%
**53
99%
ReloadSwiss RS 14
<<locked>>
92%
23438
50%
**39
100%
ReloadSwiss RS 36
<<locked>>
94%
40596
87%
**99
96%
SNPE Vectan BA6 1/2
<<locked>>
97%
39827
86%
**48
100%
[Shooters World Buffalo Rifle]*
<<locked>>
85%
40350
87%
**49
94%
Vihtavuori N110
<<locked>>
88%
39682
86%
**30
100%
Vihtavuori N120
<<locked>>
95%
31111
67%
**08
96%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
36230
78%
**82
98%
[ADI AR 2207]*
<<locked>>
85%
24062
52%
**28
90%
[Alliant Reloder-7]*
<<locked>>
93%
32735
71%
**21
91%
Hodgdon TrailBoss
<<locked>>
88%
22640
49%
**63
100%
[IMR 4227]*
<<locked>>
80%
27978
60%
**41
91%
[Lovex D060]*
<<locked>>
81%
35694
77%
**48
92%
Lovex S053
<<locked>>
81%
27195
59%
**57
95%
ReloadSwiss RS 14
<<locked>>
86%
21451
46%
**83
100%
[ReloadSwiss RS 36]*
<<locked>>
83%
28094
61%
**00
91%
SNPE Vectan BA6 1/2
<<locked>>
80%
25512
55%
**39
100%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
35694
77%
**48
92%
Vihtavuori N110
<<locked>>
81%
32503
70%
**82
100%
[Vihtavuori N120]*
<<locked>>
83%
21785
47%
**10
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page