top of page

Load data for .221 Rem. Fireball + .224 | 50gr | AERO SB,- smax:11.40

Recommended Powder(s): Lovex S053

.221 Rem. Fireball + .224 | 50gr | AERO SB,- smax:11.40

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 50gr | AERO SB,- smax:11.40
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.764" | 19.4mm
Caliber:
.221 Rem. Fireball load data
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.358" | 9.1mm
Shank Seated Depth:
0.358" | 9.1mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B8_C125
Last updated:
2025-02-02

Load data for 26 loads in caliber .221 Rem. Fireball with .224 | 50gr | AERO SB,- smax:11.40 bullet and 13 powders such as Lovex S053. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
85%
40944
88%
**17
99%
ADI AR 2207
<<locked>>
96%
34461
74%
**72
97%
[Alliant Reloder-7]*
<<locked>>
96%
36854
79%
**59
93%
Hodgdon TrailBoss
<<locked>>
92%
23844
51%
**26
100%
IMR 4227
<<locked>>
91%
39595
85%
**69
96%
Lovex D060
<<locked>>
85%
40741
88%
**02
95%
Lovex S053 👍
<<locked>>
93%
39537
85%
**89
99%
ReloadSwiss RS 14
<<locked>>
93%
23424
50%
**72
100%
ReloadSwiss RS 36
<<locked>>
94%
41466
89%
**54
97%
SNPE Vectan BA6 1/2
<<locked>>
96%
39972
86%
**84
100%
Shooters World Buffalo Rifle
<<locked>>
85%
40741
88%
**02
95%
Vihtavuori N110
<<locked>>
88%
40538
87%
**72
100%
Vihtavuori N120
<<locked>>
96%
32779
71%
**94
97%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
36506
79%
**28
99%
[ADI AR 2207]*
<<locked>>
83%
22771
49%
**25
90%
[Alliant Reloder-7]*
<<locked>>
90%
30530
66%
**05
91%
Hodgdon TrailBoss
<<locked>>
86%
21770
47%
**73
100%
[IMR 4227]*
<<locked>>
81%
29051
63%
**16
92%
[Lovex D060]*
<<locked>>
81%
36158
78%
**97
93%
Lovex S053
<<locked>>
81%
27412
59%
**00
96%
ReloadSwiss RS 14
<<locked>>
82%
19580
42%
**67
100%
[ReloadSwiss RS 36]*
<<locked>>
81%
27398
59%
**13
91%
SNPE Vectan BA6 1/2
<<locked>>
81%
26020
56%
**88
100%
[Shooters World Buffalo Rifle]*
<<locked>>
81%
36158
78%
**97
93%
Vihtavuori N110
<<locked>>
81%
33141
71%
**35
100%
[Vihtavuori N120]*
<<locked>>
83%
21524
46%
**46
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page