top of page

Load data for .221 Rem. Fireball + .224 | 45gr | MEN SP

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.221 Rem. Fireball + .224 | 45gr | MEN SP

Load Specifications

Bullet:
.224 | 45gr | MEN SP
Bullet Weight:
45gr | 2.9g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.221 Rem. Fireball
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.594" | 15.1mm
Shank Seated Depth:
0.594" | 15.1mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B3769_C125

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 24 loads in caliber .221 Rem. Fireball with .224 | 45gr | MEN SP bullet and 12 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
90%
40277
87%
**40
97%
Accurate No. 11 FS
<<locked>>
89%
41104
89%
**35
96%
Hodgdon LilGun
<<locked>>
85%
40466
87%
**36
100%
Hodgdon TrailBoss
<<locked>>
93%
22785
49%
**39
100%
[IMR 4227]*
<<locked>>
97%
38798
84%
**72
93%
[Lovex D060]*
<<locked>>
90%
40988
88%
**25
91%
Lovex S040
<<locked>>
83%
40712
88%
**72
100%
Lovex S053
<<locked>>
95%
34360
74%
**20
96%
ReloadSwiss RS 14
<<locked>>
94%
22452
48%
**88
100%
SNPE Vectan BA6 1/2
<<locked>>
96%
33272
72%
**21
100%
[Shooters World Buffalo Rifle]*
<<locked>>
90%
40988
88%
**25
91%
Vihtavuori N110 👍
<<locked>>
93%
39030
84%
**15
100%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
31140
67%
**30
95%
[Accurate No. 11 FS]*
<<locked>>
81%
31386
68%
**12
92%
Hodgdon LilGun
<<locked>>
81%
35201
76%
**31
100%
Hodgdon TrailBoss
<<locked>>
86%
20639
44%
**80
100%
[IMR 4227]*
<<locked>>
92%
33765
73%
**57
91%
[Lovex D060]*
<<locked>>
88%
38696
83%
**72
90%
Lovex S040
<<locked>>
81%
37855
82%
**20
100%
[Lovex S053]*
<<locked>>
81%
22974
49%
**92
90%
ReloadSwiss RS 14
<<locked>>
82%
18434
40%
**67
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
22089
48%
**16
98%
[Shooters World Buffalo Rifle]*
<<locked>>
88%
38696
83%
**72
90%
Vihtavuori N110
<<locked>>
81%
26948
58%
**33
98%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page