top of page

Load data for .221 Rem. Fireball + .224 | 40gr | Nosler Varmageddon BTip

Recommended Powder(s):

.221 Rem. Fireball + .224 | 40gr | Nosler Varmageddon BTip

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 40gr | Nosler Varmageddon BTip
Manufacturer SKU:
17230
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.665" | 16.9mm
Caliber:
.221 Rem. Fireball load data
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.259" | 6.6mm
Shank Seated Depth:
0.259" | 6.6mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B3952_C125
Last updated:
2025-01-01

Load data for 26 loads in caliber .221 Rem. Fireball with .224 | 40gr | Nosler Varmageddon BTip bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 25 fps

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
86%
39421
85%
**72
98%
[ADI AR 2207]*
<<locked>>
96%
31096
67%
**56
92%
Accurate No. 11 FS
<<locked>>
86%
41727
90%
**07
96%
Hodgdon TrailBoss
<<locked>>
92%
23395
50%
**49
100%
[IMR 4227]*
<<locked>>
94%
39842
86%
**58
94%
[Lovex D063]*
<<locked>>
84%
40959
88%
**74
92%
Lovex S053
<<locked>>
96%
39711
86%
**94
98%
ReloadSwiss RS 14
<<locked>>
95%
23830
51%
**21
100%
[ReloadSwiss RS 36]*
<<locked>>
97%
40582
87%
**27
94%
SNPE Vectan BA6 1/2
<<locked>>
96%
36260
78%
**27
100%
[Shooters World Blackout]*
<<locked>>
84%
40959
88%
**74
92%
Vihtavuori N110 👍
<<locked>>
92%
40944
88%
**10
100%
[Vihtavuori N120]*
<<locked>>
96%
29892
64%
**81
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
33359
72%
**28
96%
[ADI AR 2207]*
<<locked>>
92%
28021
60%
**58
91%
[Accurate No. 11 FS]*
<<locked>>
81%
35244
76%
**63
94%
Hodgdon TrailBoss
<<locked>>
82%
19682
42%
**37
100%
[IMR 4227]*
<<locked>>
87%
31502
68%
**48
90%
[Lovex D063]*
<<locked>>
81%
36448
79%
**69
90%
[Lovex S053]*
<<locked>>
81%
25237
54%
**94
92%
ReloadSwiss RS 14
<<locked>>
80%
18536
40%
**60
100%
[ReloadSwiss RS 36]*
<<locked>>
89%
32605
70%
**27
91%
SNPE Vectan BA6 1/2
<<locked>>
81%
23989
52%
**02
99%
[Shooters World Blackout]*
<<locked>>
81%
36448
79%
**69
90%
Vihtavuori N110
<<locked>>
81%
30356
65%
**64
99%
[Vihtavuori N120]*
<<locked>>
91%
25208
54%
**17
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page