Load data for .22 TCM + .224 | 40gr | RWS TMH

Recommended Powder(s): Rottweil P 806, SNPE Vectan BA7 1/2

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 40gr \| RWS TMH
Bullet Weight:	40gr \| 2.6g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.460" \| 11.7mm
Caliber:	.22 TCM load data
Case Length (l3):	1.022" \| 26.0mm
Cartridge Length (C.O.L.):	1.251" \| 31.8mm
Seated Depth:	0.231" \| 5.9mm
Shank Seated Depth:	0.231" \| 5.9mm
Case Capacity:	15.2 Grains of Water \| 0.99 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	38000 psi \| 2620 bar
LID:	LID_B5352_C80
Last updated:	2025-02-02

Load data for 76 loads in caliber .22 TCM with .224 | 40gr | RWS TMH bullet and 38 powders such as Rottweil P 806, SNPE Vectan BA7 1/2. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	81%	33475	88%	**57	98%
ADI APS 350	<<locked>>	62%	32416	85%	**06	100%
ADI APS 450	<<locked>>	65%	33156	87%	**55	100%
ADI AS 30	<<locked>>	65%	34026	90%	**04	100%
Accurate No. 2	<<locked>>	63%	33156	87%	**62	100%
[Accurate No. 9]*	<<locked>>	71%	34127	90%	**06	86%
Accurate Solo 1000	<<locked>>	63%	32605	86%	**21	100%
Accurate Solo 1250	<<locked>>	67%	33605	88%	**09	100%
[Accurate TCM]*	<<locked>>	70%	33533	88%	**86	87%
[Alliant 2400]*	<<locked>>	79%	33663	89%	**09	82%
Alliant BLUE DOT	<<locked>>	81%	33373	88%	**90	90%
Alliant POWER PISTOL	<<locked>>	65%	32793	86%	**67	97%
Alliant UNIQUE	<<locked>>	66%	33634	89%	**91	100%
Baschieri & Pellagri 100	<<locked>>	65%	34171	90%	**57	100%
Hodgdon Clays	<<locked>>	62%	33141	87%	**35	100%
Hodgdon TrailBoss	<<locked>>	96%	21045	55%	**39	100%
[Lovex D037.2]*	<<locked>>	70%	34127	90%	**06	86%
Maxam CSB 1	<<locked>>	70%	33736	89%	**03	100%
Maxam CSB 2	<<locked>>	64%	32430	85%	**63	100%
Maxam CSB 3	<<locked>>	65%	33040	87%	**67	100%
Maxam CSB 4	<<locked>>	64%	33823	89%	**47	100%
[Ramshot Enforcer]*	<<locked>>	80%	33852	89%	**16	83%
ReloadSwiss RS 14	<<locked>>	94%	19580	52%	**45	100%
ReloadSwiss RS 20	<<locked>>	68%	33765	89%	**81	100%
ReloadSwiss RS 24	<<locked>>	68%	33098	87%	**73	93%
Rottweil P 806 👍	<<locked>>	70%	33431	88%	**70	100%
SNPE Vectan A0	<<locked>>	69%	32721	86%	**19	100%
SNPE Vectan BA 9	<<locked>>	64%	33373	88%	**99	100%
SNPE Vectan BA7 1/2 👍	<<locked>>	74%	33866	89%	**04	100%
SNPE Vectan BA9 1/2	<<locked>>	64%	33982	89%	**13	100%
[Shooters World Heavy Pistol]*	<<locked>>	70%	34127	90%	**06	86%
Somchem MS200	<<locked>>	66%	33591	88%	**52	100%
Vihtavuori 3N37	<<locked>>	67%	33344	88%	**18	100%
Vihtavuori 3N38	<<locked>>	78%	34026	90%	**73	94%
Vihtavuori N105	<<locked>>	83%	33344	88%	**19	97%
Vihtavuori N32C Tin Star	<<locked>>	83%	33272	88%	**45	100%
Vihtavuori N340	<<locked>>	67%	34055	90%	**62	100%
Vihtavuori N350	<<locked>>	69%	32619	86%	**08	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	19203	51%	**73	90%
ADI APS 350	<<locked>>	60%	30574	80%	**67	100%
ADI APS 450	<<locked>>	62%	31270	82%	**19	100%
ADI AS 30	<<locked>>	60%	30139	79%	**35	100%
Accurate No. 2	<<locked>>	61%	31343	82%	**19	100%
[Accurate No. 9]*	<<locked>>	65%	27644	73%	**36	81%
Accurate Solo 1000	<<locked>>	61%	30879	81%	**98	100%
Accurate Solo 1250	<<locked>>	61%	27978	74%	**94	100%
[Accurate TCM]*	<<locked>>	62%	24947	66%	**70	80%
[Alliant 2400]*	<<locked>>	77%	30908	81%	**50	80%
[Alliant BLUE DOT]*	<<locked>>	65%	21538	57%	**65	81%
Alliant POWER PISTOL	<<locked>>	61%	28224	74%	**68	95%
Alliant UNIQUE	<<locked>>	60%	28674	75%	**83	100%
Baschieri & Pellagri 100	<<locked>>	61%	30342	80%	**88	100%
Hodgdon Clays	<<locked>>	60%	31038	82%	**93	100%
Hodgdon TrailBoss	<<locked>>	62%	11400	30%	**56	100%
[Lovex D037.2]*	<<locked>>	64%	27644	73%	**36	81%
Maxam CSB 1	<<locked>>	61%	26919	71%	**72	100%
Maxam CSB 2	<<locked>>	62%	30618	81%	**31	100%
Maxam CSB 3	<<locked>>	61%	29370	77%	**98	100%
Maxam CSB 4	<<locked>>	62%	32024	84%	**21	100%
[Ramshot Enforcer]*	<<locked>>	76%	29544	78%	**21	80%
ReloadSwiss RS 14	<<locked>>	60%	10733	28%	**50	100%
ReloadSwiss RS 20	<<locked>>	62%	28543	75%	**80	100%
[ReloadSwiss RS 24]*	<<locked>>	61%	26194	69%	**16	89%
Rottweil P 806	<<locked>>	61%	24758	65%	**77	98%
SNPE Vectan A0	<<locked>>	61%	26266	69%	**01	100%
SNPE Vectan BA 9	<<locked>>	62%	31778	84%	**70	100%
SNPE Vectan BA7 1/2	<<locked>>	60%	22843	60%	**62	98%
SNPE Vectan BA9 1/2	<<locked>>	60%	30429	80%	**50	100%
[Shooters World Heavy Pistol]*	<<locked>>	64%	27644	73%	**36	81%
Somchem MS200	<<locked>>	62%	30066	79%	**86	100%
Vihtavuori 3N37	<<locked>>	61%	27325	72%	**99	100%
[Vihtavuori 3N38]*	<<locked>>	60%	20160	53%	**26	85%
[Vihtavuori N105]*	<<locked>>	61%	16940	45%	**60	84%
Vihtavuori N32C Tin Star	<<locked>>	60%	20030	53%	**89	100%
Vihtavuori N340	<<locked>>	61%	28776	76%	**70	100%
Vihtavuori N350	<<locked>>	61%	25048	66%	**34	99%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data