
Load Specifications
Load data in caliber .22 Rem. Jet Mag. with .224 | 55gr | Speer TMJ bullet and 31 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI AP 100² | <<locked>> | 68% | 31,067 psi | 84% | 1572 fps | 100% |
| ADI AP 100² | <<locked>> | 68% | 31,285 psi | 85% | 1581 fps | 100% |
| Alliant 2400*² | <<locked>> | 68% | 32,750 psi | 89% | 1680 fps | 89.9% |
| Alliant 2400*² | <<locked>> | 64% | 30,298 psi | 82% | 1627 fps | 88.6% |
| Alliant BLUE DOT² | <<locked>> | 68% | 30,821 psi | 83% | 1617 fps | 95.5% |
| Alliant BLUE DOT² | <<locked>> | 68% | 31,676 psi | 86% | 1637 fps | 95.9% |
| Alliant Herco² | <<locked>> | 68% | 31,981 psi | 86% | 1503 fps | 100% |
| Alliant Herco² | <<locked>> | 68% | 32,271 psi | 87% | 1512 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 72% | 32,605 psi | 88% | 1398 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 68% | 30,966 psi | 84% | 1378 fps | 100% |
| Hodgdon Clays² | <<locked>> | 68% | 33,025 psi | 89% | 1339 fps | 100% |
| Hodgdon Clays² | <<locked>> | 64% | 31,502 psi | 85% | 1319 fps | 100% |
| Hodgdon LilGun*² | <<locked>> | 76% | 32,213 psi | 87% | 1722 fps | 89.7% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 26,252 psi | 71% | 1247 fps | 100% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 26,745 psi | 72% | 1260 fps | 100% |
| Ramshot Enforcer*² | <<locked>> | 68% | 32,822 psi | 89% | 1686 fps | 91.1% |
| Ramshot Enforcer*² | <<locked>> | 64% | 29,544 psi | 80% | 1617 fps | 89.2% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 25,556 psi | 69% | 1270 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 26,034 psi | 70% | 1283 fps | 100% |
| SNPE Vectan BA6 1/2* | <<locked>> | 92% | 31,807 psi | 86% | 1660 fps | 93% |
| SNPE Vectan BA6 1/2* | <<locked>> | 92% | 32,866 psi | 89% | 1683 fps | 93.7% |
| SNPE Vectan BA7 1/2² | <<locked>> | 64% | 32,460 psi | 88% | 1552 fps | 100% |
| SNPE Vectan BA7 1/2² | <<locked>> | 64% | 32,634 psi | 88% | 1558 fps | 100% |
| Vihtavuori 3N38² | <<locked>> | 68% | 32,271 psi | 87% | 1627 fps | 98.8% |
| Vihtavuori 3N38² | <<locked>> | 68% | 33,228 psi | 90% | 1650 fps | 99.1% |
| Vihtavuori N105² | <<locked>> | 68% | 30,603 psi | 83% | 1617 fps | 99.8% |
| Vihtavuori N105² | <<locked>> | 68% | 31,705 psi | 86% | 1640 fps | 100% |
| Vihtavuori N110* | <<locked>> | 84% | 31,560 psi | 85% | 1670 fps | 89.7% |
| Vihtavuori N110* | <<locked>> | 84% | 32,909 psi | 89% | 1703 fps | 90.7% |
| Vihtavuori N32C Tin Star | <<locked>> | 80% | 31,821 psi | 86% | 1312 fps | 100% |
| Vihtavuori N32C Tin Star | <<locked>> | 80% | 32,184 psi | 87% | 1325 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 6"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI AP 100² | <<locked>> | 60% | 24,381 psi | 66% | 1430 fps | 99.2% |
| ADI AP 100² | <<locked>> | 60% | 25,527 psi | 69% | 1463 fps | 99.5% |
| Alliant 2400*² | <<locked>> | 64% | 28,848 psi | 78% | 1594 fps | 87.5% |
| Alliant 2400*² | <<locked>> | 60% | 26,136 psi | 71% | 1532 fps | 85.7% |
| Alliant BLUE DOT*² | <<locked>> | 60% | 24,134 psi | 65% | 1463 fps | 91.6% |
| Alliant BLUE DOT*² | <<locked>> | 60% | 25,063 psi | 68% | 1490 fps | 92.4% |
| Alliant Herco² | <<locked>> | 60% | 25,831 psi | 70% | 1391 fps | 100% |
| Alliant Herco² | <<locked>> | 60% | 26,295 psi | 71% | 1401 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 60% | 24,584 psi | 66% | 1266 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 60% | 25,048 psi | 68% | 1276 fps | 100% |
| Hodgdon Clays² | <<locked>> | 60% | 27,804 psi | 75% | 1253 fps | 100% |
| Hodgdon Clays² | <<locked>> | 60% | 28,500 psi | 77% | 1270 fps | 100% |
| Hodgdon LilGun*² | <<locked>> | 72% | 27,630 psi | 75% | 1627 fps | 86.5% |
| Hodgdon TrailBoss² | 2.8 gr | 60% | 13,024 psi | 35% | 951 fps | 100% |
| Hodgdon TrailBoss² | 2.8 gr | 60% | 13,140 psi | 36% | 955 fps | 100% |
| Ramshot Enforcer*² | <<locked>> | 60% | 24,918 psi | 67% | 1509 fps | 85.7% |
| Ramshot Enforcer*² | <<locked>> | 60% | 25,556 psi | 69% | 1526 fps | 86.4% |
| ReloadSwiss RS 14² | 2.9 gr | 60% | 12,937 psi | 35% | 974 fps | 100% |
| ReloadSwiss RS 14² | 2.9 gr | 60% | 13,068 psi | 35% | 981 fps | 100% |
| SNPE Vectan BA6 1/2* | <<locked>> | 80% | 23,076 psi | 62% | 1463 fps | 86.8% |
| SNPE Vectan BA6 1/2*² | <<locked>> | 76% | 21,422 psi | 58% | 1421 fps | 85.5% |
| SNPE Vectan BA7 1/2² | <<locked>> | 60% | 28,921 psi | 78% | 1486 fps | 100% |
| SNPE Vectan BA7 1/2² | <<locked>> | 60% | 29,167 psi | 79% | 1496 fps | 100% |
| Vihtavuori 3N38² | <<locked>> | 60% | 25,672 psi | 69% | 1490 fps | 96.5% |
| Vihtavuori 3N38² | <<locked>> | 60% | 25,947 psi | 70% | 1496 fps | 96.7% |
| Vihtavuori N105² | <<locked>> | 60% | 23,873 psi | 65% | 1473 fps | 98.2% |
| Vihtavuori N105² | <<locked>> | 60% | 24,279 psi | 66% | 1483 fps | 98.4% |
| Vihtavuori N110* | <<locked>> | 80% | 28,471 psi | 77% | 1608 fps | 87.7% |
| Vihtavuori N110*² | <<locked>> | 76% | 26,237 psi | 71% | 1555 fps | 86.2% |
| Vihtavuori N32C Tin Star² | <<locked>> | 60% | 21,234 psi | 57% | 1129 fps | 100% |
| Vihtavuori N32C Tin Star² | <<locked>> | 60% | 21,132 psi | 57% | 1132 fps | 100% |
Recommended = one of the top powders for this cartridge and bullet combination.
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 31 powders for .22 Rem. Jet Mag. loaded with the .224 | 55gr | Speer TMJ. Hodgdon LilGun delivers the highest muzzle velocity at 1,722 fps; across all powders the maximum-charge window runs from 1,247 fps to 1,722 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 10 of the 31 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (255 MPa), the top charges use 69–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .22 Rem. Jet Mag. with the .224 | 55gr | Speer TMJ they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Alliant 2400, Alliant 2400, Hodgdon LilGun burn incompletely and react more sensitively to barrel length and temperature. Hodgdon TrailBoss, Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.