Load data for .22 Rem. Jet Mag. + .223 | 55gr | SUS-TAC HP

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.223 \| 55gr \| SUS-TAC HP
Manufacturer SKU:	H12515
Bullet Weight:	55gr \| 3.6g
Bullet Diameter:	0.223" \| 5.66mm
Bullet Length:	<<locked>>
Caliber:	.22 Rem. Jet Mag. load data
Case Length (l3):	1.278" \| 32.5mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	18.5 Grains of Water \| 1.20 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	36985 psi \| 2550 bar
LID:	LID_B10302_C89
Last updated:	2026-01-31
Recommended Twist Rate:	1:9 - 1:7

Load data for 40 loads in caliber .22 Rem. Jet Mag. with .223 | 55gr | SUS-TAC HP bullet and 20 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	33011	89%	**75	100%
[Accurate 4100]*	<<locked>>	71%	32677	88%	**37	86%
[Alliant 2400]*	<<locked>>	68%	33040	89%	**37	89%
Alliant BLUE DOT	<<locked>>	70%	32648	88%	**14	95%
Alliant Herco	<<locked>>	69%	32895	89%	**86	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	72%	32953	89%	**78	100%
[Hodgdon H110]*	<<locked>>	77%	33228	90%	**54	82%
[Hodgdon LilGun]*	<<locked>>	77%	32793	89%	**90	89%
Hodgdon TrailBoss	<<locked>>	95%	24497	66%	**94	100%
Maxam CSB 1	<<locked>>	62%	33170	90%	**21	100%
Ramshot Enforcer	<<locked>>	69%	33257	90%	**50	90%
ReloadSwiss RS 14	<<locked>>	95%	23699	64%	**11	100%
[ReloadSwiss RS 30]*	<<locked>>	93%	33040	89%	**93	85%
SNPE Vectan BA6 1/2	<<locked>>	94%	32605	88%	**40	92%
SNPE Vectan BA7 1/2	<<locked>>	65%	32909	89%	**22	100%
[Somchem S265]*	<<locked>>	84%	33025	89%	**04	81%
Vihtavuori 3N38	<<locked>>	67%	33098	89%	**08	99%
Vihtavuori N105 👍	<<locked>>	71%	32909	89%	**34	100%
Vihtavuori N110	<<locked>>	86%	33011	89%	**70	90%
Vihtavuori N32C Tin Star	<<locked>>	75%	32793	89%	**02	100%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	60%	24787	67%	**01	99%
[Accurate 4100]*	<<locked>>	64%	25483	69%	**76	80%
[Alliant 2400]*	<<locked>>	61%	26397	71%	**03	85%
Alliant BLUE DOT	<<locked>>	61%	25338	69%	**53	91%
Alliant Herco	<<locked>>	61%	26629	72%	**78	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	25193	68%	**57	100%
[Hodgdon H110]*	<<locked>>	74%	30530	83%	**08	80%
[Hodgdon LilGun]*	<<locked>>	67%	22640	61%	**60	80%
Hodgdon TrailBoss	<<locked>>	60%	13068	35%	**2	100%
Maxam CSB 1	<<locked>>	60%	31473	85%	**98	100%
[Ramshot Enforcer]*	<<locked>>	61%	25034	68%	**63	84%
ReloadSwiss RS 14	<<locked>>	62%	13242	36%	**1	100%
[ReloadSwiss RS 30]*	<<locked>>	87%	27847	75%	**75	80%
[SNPE Vectan BA6 1/2]*	<<locked>>	73%	18449	50%	**89	80%
SNPE Vectan BA7 1/2	<<locked>>	62%	30052	81%	**76	100%
[Somchem S265]*	<<locked>>	81%	31096	84%	**75	80%
Vihtavuori 3N38	<<locked>>	61%	27586	75%	**93	97%
Vihtavuori N105	<<locked>>	61%	23989	65%	**47	98%
[Vihtavuori N110]*	<<locked>>	72%	21582	58%	**94	80%
Vihtavuori N32C Tin Star	<<locked>>	62%	24772	67%	**71	100%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data