Load data for .22 Rem. Jet Mag. + .222 | 60gr | Hornady V-MAX

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.222 \| 60gr \| Hornady V-MAX
Manufacturer SKU:	2207
Bullet Weight:	60gr \| 3.9g
Bullet Diameter:	0.222" \| 5.64mm
Bullet Length:	0.782" \| 19.9mm
Caliber:	.22 Rem. Jet Mag. load data
Case Length (l3):	1.278" \| 32.5mm
Cartridge Length (C.O.L.):	1.635" \| 41.5mm
Seated Depth:	0.425" \| 10.8mm
Shank Seated Depth:	0.425" \| 10.8mm
Case Capacity:	18.5 Grains of Water \| 1.20 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	36985 psi \| 2550 bar
LID:	LID_B2497_C89
Last updated:	2025-02-02

Load data for 46 loads in caliber .22 Rem. Jet Mag. with .222 | 60gr | Hornady V-MAX bullet and 23 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	73%	36724	99%	**58	100%
Accurate 4100	<<locked>>	72%	36477	99%	**47	90%
[Accurate No. 11 FS]*	<<locked>>	80%	35897	97%	**24	82%
Accurate Solo 1250	<<locked>>	62%	36854	100%	**17	100%
Alliant 2400	<<locked>>	69%	36129	98%	**34	92%
Alliant BLUE DOT	<<locked>>	72%	36172	98%	**24	98%
[Hodgdon H110]*	<<locked>>	76%	36013	97%	**37	85%
Hodgdon LilGun	<<locked>>	77%	36622	99%	**90	92%
Hodgdon TrailBoss	<<locked>>	97%	26020	70%	**65	100%
Maxam CSB 1	<<locked>>	65%	36970	100%	**14	100%
Ramshot Enforcer	<<locked>>	69%	35679	96%	**31	93%
ReloadSwiss RS 14	<<locked>>	95%	24598	67%	**71	100%
[ReloadSwiss RS 30]*	<<locked>>	93%	36332	98%	**96	89%
SNPE Vectan A0	<<locked>>	64%	36376	98%	**44	100%
SNPE Vectan BA6 1/2	<<locked>>	94%	35810	97%	**27	95%
SNPE Vectan BA7 1/2	<<locked>>	67%	36477	99%	**16	100%
[Somchem S265]*	<<locked>>	84%	35998	97%	**01	85%
Vihtavuori 3N38	<<locked>>	69%	36956	100%	**98	100%
Vihtavuori N105	<<locked>>	72%	36782	99%	**17	100%
Vihtavuori N110	<<locked>>	85%	35882	97%	**57	93%
Vihtavuori N32C Tin Star	<<locked>>	80%	36767	99%	**96	100%
Vihtavuori N350	<<locked>>	62%	36027	97%	**03	100%
[Winchester 296]*	<<locked>>	76%	36709	99%	**73	82%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26716	72%	**94	100%
[Accurate 4100]*	<<locked>>	61%	25048	68%	**04	82%
[Accurate No. 11 FS]*	<<locked>>	78%	33301	90%	**78	80%
Accurate Solo 1250	<<locked>>	60%	35157	95%	**88	100%
[Alliant 2400]*	<<locked>>	61%	28485	77%	**80	88%
Alliant BLUE DOT	<<locked>>	62%	27035	73%	**40	94%
[Hodgdon H110]*	<<locked>>	69%	27963	76%	**93	80%
[Hodgdon LilGun]*	<<locked>>	62%	20740	56%	**52	80%
Hodgdon TrailBoss	<<locked>>	62%	14214	38%	**2	100%
Maxam CSB 1	<<locked>>	61%	33402	90%	**62	100%
[Ramshot Enforcer]*	<<locked>>	61%	27122	73%	**57	88%
ReloadSwiss RS 14	<<locked>>	61%	13503	36%	**9	100%
[ReloadSwiss RS 30]*	<<locked>>	80%	25077	68%	**50	80%
SNPE Vectan A0	<<locked>>	62%	34519	93%	**24	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	67%	16998	46%	**04	81%
SNPE Vectan BA7 1/2	<<locked>>	60%	30632	83%	**21	100%
[Somchem S265]*	<<locked>>	76%	29095	79%	**63	80%
Vihtavuori 3N38	<<locked>>	62%	29660	80%	**80	98%
Vihtavuori N105	<<locked>>	61%	26542	72%	**34	99%
[Vihtavuori N110]*	<<locked>>	66%	19972	54%	**93	80%
Vihtavuori N32C Tin Star	<<locked>>	61%	24816	67%	**22	100%
Vihtavuori N350	<<locked>>	61%	34432	93%	**86	100%
[Winchester 296]*	<<locked>>	74%	33968	92%	**37	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data