
Load Specifications
Load data in caliber .22 PPC USA with .222 | 40gr | Reichenberg HDB Universal bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Alliant Reloder-7 and ReloadSwiss RS 36.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 92% | 51,648 psi | 88% | 3612 fps | 98.4% |
| Accurate LT-30 | <<locked>> | 98% | 51,851 psi | 88% | 3599 fps | 95.9% |
| ADI AR 2205 | <<locked>> | 84% | 50,879 psi | 87% | 3517 fps | 100% |
| ADI AR 2207 | <<locked>> | 98% | 52,388 psi | 89% | 3750 fps | 100% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 37,217 psi | 63% | 3461 fps | 96.4% |
| Alliant Reloder-10xᴾ | <<locked>> | 100% | 46,557 psi | 79% | 3648 fps | 97.7% |
| Alliant Reloder-7 | <<locked>> | 96% | 52,272 psi | 89% | 3694 fps | 98.9% |
| Baschieri & Pellagri 106 | <<locked>> | 98% | 50,357 psi | 86% | 3566 fps | 96.1% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,081 psi | 51% | 2333 fps | 100% |
| IMR 4198ᴾ | <<locked>> | 100% | 48,791 psi | 83% | 3648 fps | 98.8% |
| IMR 4227 | <<locked>> | 90% | 50,792 psi | 86% | 3632 fps | 99.7% |
| Lovex D060 | <<locked>> | 84% | 50,749 psi | 86% | 3675 fps | 98.8% |
| Lovex S053 | <<locked>> | 92% | 51,590 psi | 88% | 3629 fps | 100% |
| Norma 200ᴾ | <<locked>> | 100% | 53,113 psi | 90% | 3763 fps | 99.2% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 29,269 psi | 50% | 2375 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 90% | 49,603 psi | 84% | 3645 fps | 99.5% |
| Shooters World Buffalo Rifle | <<locked>> | 84% | 50,749 psi | 86% | 3675 fps | 98.8% |
| Shooters World SOCOM | <<locked>> | 84% | 52,228 psi | 89% | 3635 fps | 99.4% |
| SNPE Vectan BA6 1/2 | <<locked>> | 96% | 52,286 psi | 89% | 3465 fps | 100% |
| Vihtavuori N110 | <<locked>> | 86% | 50,618 psi | 86% | 3543 fps | 100% |
| Vihtavuori N120 | <<locked>> | 98% | 52,489 psi | 89% | 3694 fps | 100% |
| Vihtavuori N130ᴾ | <<locked>> | 100% | 44,788 psi | 76% | 3524 fps | 97% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 84% | 39,610 psi | 67% | 3353 fps | 95.7% |
| Accurate LT-30 | <<locked>> | 96% | 48,820 psi | 83% | 3540 fps | 95.2% |
| ADI AR 2205 | <<locked>> | 80% | 45,121 psi | 77% | 3409 fps | 100% |
| ADI AR 2207 | 20.1 gr | 80% | 29,515 psi | 50% | 3192 fps | 96.3% |
| Alliant AR-Comp | <<locked>> | 98% | 34,954 psi | 60% | 3396 fps | 95.4% |
| Alliant Reloder-10x | <<locked>> | 94% | 38,580 psi | 66% | 3461 fps | 95.6% |
| Alliant Reloder-7 | 21.9 gr | 84% | 35,897 psi | 61% | 3317 fps | 95.2% |
| Baschieri & Pellagri 106 | <<locked>> | 96% | 47,050 psi | 80% | 3504 fps | 95.3% |
| Hodgdon TrailBoss | <<locked>> | 80% | 21,611 psi | 37% | 2083 fps | 100% |
| IMR 4198 | <<locked>> | 90% | 36,564 psi | 62% | 3353 fps | 95.8% |
| IMR 4227 | <<locked>> | 80% | 37,057 psi | 63% | 3317 fps | 97.5% |
| Lovex D060 | <<locked>> | 80% | 45,020 psi | 77% | 3547 fps | 97.8% |
| Lovex S053 | <<locked>> | 80% | 36,129 psi | 62% | 3297 fps | 99.5% |
| Norma 200 | <<locked>> | 88% | 36,158 psi | 62% | 3379 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 21,509 psi | 37% | 2139 fps | 100% |
| ReloadSwiss RS 36 | 20.9 gr | 80% | 36,100 psi | 61% | 3330 fps | 97.1% |
| Shooters World Buffalo Rifle | <<locked>> | 80% | 45,020 psi | 77% | 3547 fps | 97.8% |
| Shooters World SOCOM | <<locked>> | 80% | 45,759 psi | 78% | 3504 fps | 98.6% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 34,026 psi | 58% | 3110 fps | 100% |
| Vihtavuori N110 | <<locked>> | 80% | 42,264 psi | 72% | 3386 fps | 100% |
| Vihtavuori N120 | <<locked>> | 80% | 29,791 psi | 51% | 3166 fps | 97.7% |
| Vihtavuori N130 | <<locked>> | 96% | 39,668 psi | 68% | 3402 fps | 95.6% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for .22 PPC USA loaded with the .222 | 40gr | Reichenberg HDB Universal. Norma 200 delivers the highest muzzle velocity at 3,763 fps; across all powders the maximum-charge window runs from 2,333 fps to 3,763 fps. Alliant AR-Comp gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (405 MPa), the top charges use 50–90 %, leaving at least 10 % headroom. Alliant AR-Comp, Alliant Reloder-10x, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Alliant Reloder-7, ReloadSwiss RS 36 rank at the top here: for .22 PPC USA with the .222 | 40gr | Reichenberg HDB Universal they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.