
Load Specifications
Load data in caliber .22 Nosler with .223 | 45gr | Speer Spitzer Soft Point bullet and 36 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, ADI AR 2219 and SNPE Vectan SP 10.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 46,833 psi | 85% | 3461 fps | 99.4% |
| Accurate 2015 | <<locked>> | 96% | 47,514 psi | 86% | 3556 fps | 98.9% |
| Accurate 2460 | <<locked>> | 94% | 49,734 psi | 90% | 3606 fps | 96.8% |
| Accurate 2495ᴾ | <<locked>> | 100% | 42,163 psi | 77% | 3501 fps | 98.4% |
| Accurate LT-30 | <<locked>> | 88% | 47,529 psi | 86% | 3471 fps | 97.8% |
| Accurate LT-32 | <<locked>> | 88% | 47,993 psi | 87% | 3478 fps | 95.9% |
| ADI AR 2207 | <<locked>> | 86% | 47,079 psi | 86% | 3553 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 48,631 psi | 88% | 3632 fps | 97.8% |
| Alliant AR-Comp | <<locked>> | 98% | 46,702 psi | 85% | 3645 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 92% | 47,558 psi | 86% | 3596 fps | 99.5% |
| Alliant Reloder-7 | <<locked>> | 86% | 48,791 psi | 89% | 3553 fps | 99.8% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 49,559 psi | 90% | 3504 fps | 98.5% |
| Hodgdon H322 | <<locked>> | 92% | 47,137 psi | 86% | 3602 fps | 97.5% |
| Hodgdon H335 | <<locked>> | 92% | 48,269 psi | 88% | 3609 fps | 96.8% |
| Hodgdon H4198 | <<locked>> | 86% | 49,400 psi | 90% | 3537 fps | 97.5% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,865 psi | 58% | 2333 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 47,413 psi | 86% | 3675 fps | 98.4% |
| IMR 4198 | <<locked>> | 92% | 49,255 psi | 90% | 3593 fps | 99.9% |
| IMR 4227 | <<locked>> | 82% | 49,139 psi | 89% | 3524 fps | 100% |
| Lovex S053 | <<locked>> | 82% | 47,892 psi | 87% | 3468 fps | 100% |
| Norma 200 | <<locked>> | 88% | 47,805 psi | 87% | 3576 fps | 99.8% |
| Norma 202ᴾ | <<locked>> | 100% | 48,718 psi | 89% | 3619 fps | 96.9% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,662 psi | 58% | 2382 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 49,081 psi | 89% | 3553 fps | 100% |
| Rottweil R 901 | <<locked>> | 98% | 49,719 psi | 90% | 3609 fps | 96.8% |
| SNPE Vectan BA6 1/2 | <<locked>> | 86% | 48,631 psi | 88% | 3304 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 49,705 psi | 90% | 3635 fps | 97% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 48,631 psi | 88% | 3609 fps | 98.5% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 48,718 psi | 89% | 3514 fps | 96.7% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 41,510 psi | 75% | 3363 fps | 96.2% |
| Somchem S335 | <<locked>> | 98% | 47,572 psi | 86% | 3510 fps | 97.5% |
| Vihtavuori N120 | <<locked>> | 86% | 47,137 psi | 86% | 3497 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 48,530 psi | 88% | 3533 fps | 99.5% |
| Vihtavuori N133 | <<locked>> | 98% | 47,805 psi | 87% | 3524 fps | 98.9% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 42,728 psi | 78% | 3510 fps | 98.4% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 45,730 psi | 83% | 3520 fps | 96.6% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 43,642 psi | 79% | 3389 fps | 99% |
| Accurate 2015 | <<locked>> | 86% | 34,287 psi | 62% | 3235 fps | 95.6% |
| Accurate 2460 | <<locked>> | 90% | 42,960 psi | 78% | 3458 fps | 95.1% |
| Accurate 2495 | <<locked>> | 92% | 31,792 psi | 58% | 3225 fps | 95.1% |
| Accurate LT-30 | <<locked>> | 82% | 39,218 psi | 71% | 3278 fps | 95.6% |
| Accurate LT-32 | <<locked>> | 86% | 45,179 psi | 82% | 3415 fps | 95.1% |
| ADI AR 2207 | <<locked>> | 80% | 38,827 psi | 71% | 3373 fps | 99.9% |
| ADI AR 2219 | 27.8 gr | 84% | 39,450 psi | 72% | 3419 fps | 95.4% |
| Alliant AR-Comp | 25.5 gr | 82% | 27,775 psi | 50% | 3110 fps | 95.4% |
| Alliant Reloder-10x | <<locked>> | 80% | 32,474 psi | 59% | 3212 fps | 96.1% |
| Alliant Reloder-7 | <<locked>> | 80% | 40,161 psi | 73% | 3363 fps | 98.8% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 37,898 psi | 69% | 3245 fps | 95.7% |
| Hodgdon H322 | <<locked>> | 86% | 38,638 psi | 70% | 3396 fps | 95.1% |
| Hodgdon H335 | <<locked>> | 88% | 42,235 psi | 77% | 3474 fps | 95.1% |
| Hodgdon H4198 | <<locked>> | 80% | 40,654 psi | 74% | 3337 fps | 95.3% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,250 psi | 42% | 2090 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 36,390 psi | 66% | 3396 fps | 95.3% |
| IMR 4198 | <<locked>> | 80% | 34,185 psi | 62% | 3225 fps | 97.7% |
| IMR 4227 | <<locked>> | 80% | 46,079 psi | 84% | 3461 fps | 100% |
| Lovex S053 | <<locked>> | 80% | 45,005 psi | 82% | 3412 fps | 100% |
| Norma 200 | <<locked>> | 80% | 36,898 psi | 67% | 3320 fps | 98.3% |
| Norma 202 | <<locked>> | 96% | 42,569 psi | 77% | 3481 fps | 95.3% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,221 psi | 42% | 2139 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 46,137 psi | 84% | 3494 fps | 100% |
| Rottweil R 901 | <<locked>> | 94% | 44,077 psi | 80% | 3488 fps | 95.4% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 41,640 psi | 76% | 3176 fps | 100% |
| SNPE Vectan SP 10 | 29.5 gr | 86% | 43,149 psi | 78% | 3494 fps | 95.3% |
| SNPE Vectan SP 3 | <<locked>> | 84% | 37,666 psi | 68% | 3346 fps | 95.8% |
| SNPE Vectan Tubal 3000 | <<locked>> | 94% | 42,931 psi | 78% | 3386 fps | 95.2% |
| SNPE Vectan Tubal 5000 | <<locked>> | 98% | 39,044 psi | 71% | 3301 fps | 95.4% |
| Somchem S335 | <<locked>> | 92% | 39,320 psi | 71% | 3320 fps | 95.3% |
| Vihtavuori N120 | <<locked>> | 80% | 38,957 psi | 71% | 3330 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 31,444 psi | 57% | 3110 fps | 95.5% |
| Vihtavuori N133 | <<locked>> | 88% | 35,027 psi | 64% | 3219 fps | 95.7% |
| Vihtavuori N135 | <<locked>> | 92% | 33,011 psi | 60% | 3251 fps | 95.3% |
| Vihtavuori N140 | <<locked>> | 96% | 40,451 psi | 74% | 3396 fps | 95.1% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 36 powders for .22 Nosler loaded with the .223 | 45gr | Speer Spitzer Soft Point. IMR 3031 delivers the highest muzzle velocity at 3,675 fps; across all powders the maximum-charge window runs from 2,333 fps to 3,675 fps. Accurate 2495 gives the best case fill at 100 %, and 36 of the 36 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (379 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. Accurate 2495, Hodgdon TrailBoss, IMR 3031 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, ADI AR 2219, SNPE Vectan SP 10 rank at the top here: for .22 Nosler with the .223 | 45gr | Speer Spitzer Soft Point they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.