Load data for .22 Hornet + .224 | 55gr | Rhino Solid Shank

.22 Hornet cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:55 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.403"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:14.5 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:43,511 psi
Recommended Twist Rate:1:12.5

Load data in caliber .22 Hornet with .224 | 55gr | Rhino Solid Shank bullet and 7 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Vihtavuori N110 and SNPE Vectan BA6 1/2.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2205<<locked>>94%38,769 psi89%2175 fps96%
Hodgdon LilGun<<locked>>90%37,376 psi86%2352 fps99.9%
Hodgdon TrailBossᴾ<<locked>>100%23,511 psi54%1398 fps100%
Lovex S040<<locked>>86%37,159 psi85%2182 fps99.2%
ReloadSwiss RS 14ᴾ<<locked>>100%22,872 psi53%1434 fps100%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%29,486 psi68%2057 fps99.5%
Vihtavuori N110ᴾ<<locked>>100%37,869 psi87%2260 fps99.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2205<<locked>>92%36,361 psi84%2136 fps95.3%
Hodgdon LilGun8.1 gr80%25,904 psi60%2123 fps98.1%
Hodgdon TrailBoss<<locked>>80%16,650 psi38%1240 fps100%
Lovex S040<<locked>>80%31,415 psi72%2073 fps98%
ReloadSwiss RS 14<<locked>>80%16,447 psi38%1276 fps100%
SNPE Vectan BA6 1/26.6 gr82%18,956 psi44%1781 fps95.6%
Vihtavuori N1106.7 gr80%21,016 psi48%1896 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 7 powders for .22 Hornet loaded with the .224 | 55gr | Rhino Solid Shank. Hodgdon LilGun delivers the highest muzzle velocity at 2,352 fps; across all powders the maximum-charge window runs from 1,398 fps to 2,352 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 7 of the 7 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (300 MPa), the top charges use 53–89 %, leaving at least 11 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:12.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, SNPE Vectan BA6 1/2 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Vihtavuori N110, SNPE Vectan BA6 1/2 rank at the top here: for .22 Hornet with the .224 | 55gr | Rhino Solid Shank they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data