Load data for .22 BR Rem. + .224 | 40gr | Impala LW CFN

.22 BR Rem. cartridge drawing
Impala Bullets logo

Load Specifications

Bullet Manufacturer:Impala Bullets
Bullet Weight:40 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.55"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:36 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi

Load data in caliber .22 BR Rem. with .224 | 40gr | Impala LW CFN bullet and 33 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%52,997 psi90%3602 fps99.6%
Accurate 2015<<locked>>98%50,763 psi86%3635 fps98.8%
Accurate 2460<<locked>>94%49,879 psi85%3615 fps96%
Accurate 2495ᴾ<<locked>>100%43,482 psi74%3543 fps97.9%
Accurate LT-30<<locked>>90%50,299 psi86%3550 fps97.5%
ADI AR 2207<<locked>>90%52,982 psi90%3701 fps100%
ADI AR 2219<<locked>>92%51,822 psi88%3714 fps97.7%
Alliant AR-Compᴾ<<locked>>100%49,574 psi84%3720 fps100%
Alliant Reloder-10x<<locked>>94%50,836 psi87%3688 fps99.5%
Alliant Reloder-7<<locked>>88%51,909 psi88%3642 fps99.7%
Baschieri & Pellagri 106<<locked>>92%52,286 psi89%3570 fps98.3%
Hodgdon H322<<locked>>94%49,690 psi85%3675 fps97.2%
Hodgdon H335<<locked>>94%51,750 psi88%3691 fps96.7%
Hodgdon H4198<<locked>>88%51,996 psi89%3612 fps97.2%
Hodgdon TrailBossᴾ<<locked>>100%32,227 psi55%2408 fps100%
IMR 3031ᴾ<<locked>>100%47,340 psi81%3684 fps97.7%
IMR 4198<<locked>>94%51,198 psi87%3665 fps99.8%
IMR 4227<<locked>>84%51,329 psi87%3609 fps100%
Lovex S053<<locked>>84%50,865 psi87%3570 fps100%
Norma 200<<locked>>90%51,648 psi88%3675 fps99.8%
Norma 202ᴾ<<locked>>100%48,269 psi82%3622 fps96%
ReloadSwiss RS 14ᴾ<<locked>>100%32,169 psi55%2464 fps100%
ReloadSwiss RS 36<<locked>>84%51,648 psi88%3642 fps100%
Rottweil R 901<<locked>>98%50,662 psi86%3635 fps96.1%
SNPE Vectan BA6 1/2<<locked>>88%51,300 psi87%3399 fps100%
SNPE Vectan SP 10<<locked>>92%52,649 psi90%3707 fps96.8%
SNPE Vectan SP 3<<locked>>94%51,314 psi87%3681 fps98.3%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%51,750 psi88%3583 fps96.4%
Somchem S335ᴾ<<locked>>100%50,894 psi87%3586 fps97.4%
Vihtavuori N120<<locked>>90%52,924 psi90%3638 fps100%
Vihtavuori N130<<locked>>96%51,750 psi88%3619 fps99.4%
Vihtavuori N133ᴾ<<locked>>100%50,430 psi86%3589 fps98.7%
Vihtavuori N135ᴾ<<locked>>100%42,757 psi73%3524 fps97.6%

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%43,816 psi75%3422 fps98.4%
Accurate 2015<<locked>>88%37,347 psi64%3337 fps95.7%
Accurate 2460<<locked>>92%46,847 psi80%3553 fps95.2%
Accurate 2495<<locked>>94%35,433 psi60%3346 fps95.6%
Accurate LT-30<<locked>>84%42,018 psi72%3369 fps95.4%
ADI AR 2207<<locked>>80%39,146 psi67%3422 fps99.8%
ADI AR 2219<<locked>>86%42,177 psi72%3504 fps95.2%
Alliant AR-Comp<<locked>>84%30,240 psi51%3215 fps95.5%
Alliant Reloder-10x<<locked>>80%33,301 psi57%3264 fps95.4%
Alliant Reloder-7<<locked>>80%40,814 psi69%3409 fps98.2%
Baschieri & Pellagri 106<<locked>>84%40,509 psi69%3323 fps95.5%
Hodgdon H322<<locked>>90%43,932 psi75%3547 fps95.7%
Hodgdon H335<<locked>>90%44,976 psi77%3550 fps95%
Hodgdon H4198<<locked>>82%43,366 psi74%3428 fps95%
Hodgdon TrailBoss<<locked>>80%23,917 psi41%2172 fps100%
IMR 3031<<locked>>94%39,291 psi67%3491 fps95.2%
IMR 4198<<locked>>80%34,345 psi58%3264 fps96.7%
IMR 4227<<locked>>80%45,759 psi78%3501 fps99.8%
Lovex S053<<locked>>80%44,991 psi77%3461 fps100%
Norma 200<<locked>>80%38,247 psi65%3383 fps97.8%
Norma 202<<locked>>98%45,426 psi77%3560 fps95.2%
ReloadSwiss RS 14<<locked>>80%23,960 psi41%2228 fps100%
ReloadSwiss RS 36<<locked>>80%45,745 psi78%3527 fps99.8%
Rottweil R 901<<locked>>96%47,761 psi81%3579 fps95.4%
SNPE Vectan BA6 1/2<<locked>>80%41,423 psi71%3228 fps100%
SNPE Vectan SP 10<<locked>>88%46,282 psi79%3576 fps95.2%
SNPE Vectan SP 3<<locked>>86%40,030 psi68%3435 fps95.5%
SNPE Vectan Tubal 3000<<locked>>96%46,166 psi79%3474 fps95.1%
Somchem S335<<locked>>94%42,192 psi72%3402 fps95.2%
Vihtavuori N120<<locked>>80%39,146 psi67%3376 fps100%
Vihtavuori N130<<locked>>82%33,866 psi58%3209 fps95.4%
Vihtavuori N133<<locked>>90%37,550 psi64%3307 fps95.6%
Vihtavuori N135<<locked>>94%35,911 psi61%3353 fps95.4%

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 33 powders for .22 BR Rem. loaded with the .224 | 40gr | Impala LW CFN. Alliant AR-Comp delivers the highest muzzle velocity at 3,720 fps; across all powders the maximum-charge window runs from 2,408 fps to 3,720 fps. Accurate 2495 gives the best case fill at 100 %, and 33 of the 33 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data