
Load Specifications
Load data in caliber .22 ARC with .224 | 50gr | Hornady ECX bullet and 38 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 46,572 psi | 90% | 3301 fps | 99.7% |
| Accurate 2015 | <<locked>> | 94% | 44,106 psi | 85% | 3333 fps | 98.9% |
| Accurate 2460 | <<locked>> | 92% | 45,992 psi | 88% | 3386 fps | 96.8% |
| Accurate 2495ᴾ | <<locked>> | 100% | 41,727 psi | 80% | 3346 fps | 98.8% |
| Accurate 2520 | <<locked>> | 96% | 46,456 psi | 89% | 3432 fps | 96.4% |
| Accurate LT-30 | <<locked>> | 86% | 44,904 psi | 86% | 3264 fps | 97.9% |
| Accurate LT-32 | <<locked>> | 86% | 45,324 psi | 87% | 3271 fps | 96% |
| ADI AR 2207 | <<locked>> | 86% | 46,963 psi | 90% | 3386 fps | 100% |
| ADI AR 2219 | <<locked>> | 88% | 45,368 psi | 87% | 3412 fps | 97.8% |
| Alliant AR-Comp | <<locked>> | 98% | 46,688 psi | 90% | 3491 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 90% | 44,788 psi | 86% | 3379 fps | 99.6% |
| Alliant Reloder-7 | <<locked>> | 84% | 45,774 psi | 88% | 3337 fps | 99.8% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 46,340 psi | 89% | 3294 fps | 98.5% |
| Hodgdon H322 | <<locked>> | 90% | 43,859 psi | 84% | 3379 fps | 97.5% |
| Hodgdon H335 | <<locked>> | 90% | 45,411 psi | 87% | 3402 fps | 96.9% |
| Hodgdon H4198 | <<locked>> | 84% | 46,514 psi | 89% | 3320 fps | 97.6% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,734 psi | 61% | 2198 fps | 100% |
| IMR 3031 | <<locked>> | 98% | 44,396 psi | 85% | 3458 fps | 98.5% |
| IMR 4198 | <<locked>> | 90% | 46,383 psi | 89% | 3373 fps | 100% |
| Lovex D073.4 | <<locked>> | 86% | 46,238 psi | 89% | 3402 fps | 96% |
| Norma 200 | <<locked>> | 86% | 44,773 psi | 86% | 3360 fps | 99.8% |
| Norma 202 | <<locked>> | 98% | 45,295 psi | 87% | 3399 fps | 96.9% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,546 psi | 61% | 2247 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 92% | 46,789 psi | 90% | 3402 fps | 96% |
| Rottweil R 901 | <<locked>> | 96% | 46,021 psi | 89% | 3383 fps | 96.7% |
| Shooters World AR Plus | <<locked>> | 86% | 46,238 psi | 89% | 3402 fps | 96% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 46,325 psi | 89% | 3100 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 88% | 46,166 psi | 89% | 3412 fps | 96.9% |
| SNPE Vectan SP 3 | <<locked>> | 90% | 45,992 psi | 88% | 3396 fps | 98.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 96% | 45,803 psi | 88% | 3307 fps | 96.8% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 41,843 psi | 80% | 3232 fps | 97% |
| Somchem S335 | <<locked>> | 96% | 44,469 psi | 86% | 3301 fps | 97.5% |
| Vihtavuori N120 | <<locked>> | 84% | 44,541 psi | 86% | 3287 fps | 100% |
| Vihtavuori N130 | <<locked>> | 92% | 45,948 psi | 88% | 3330 fps | 99.6% |
| Vihtavuori N133 | <<locked>> | 96% | 45,136 psi | 87% | 3317 fps | 99% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 43,163 psi | 83% | 3369 fps | 99% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 45,963 psi | 88% | 3379 fps | 97.4% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 44,556 psi | 86% | 3356 fps | 96.5% |
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 43,700 psi | 84% | 3241 fps | 99.4% |
| Accurate 2015 | <<locked>> | 84% | 31,778 psi | 61% | 3025 fps | 95.6% |
| Accurate 2460 | <<locked>> | 88% | 39,813 psi | 77% | 3245 fps | 95% |
| Accurate 2495 | <<locked>> | 92% | 31,285 psi | 60% | 3081 fps | 95.9% |
| Accurate 2520 | <<locked>> | 94% | 43,337 psi | 83% | 3363 fps | 95.6% |
| Accurate LT-30 | <<locked>> | 80% | 36,970 psi | 71% | 3077 fps | 95.7% |
| Accurate LT-32 | <<locked>> | 84% | 42,482 psi | 82% | 3209 fps | 95.2% |
| ADI AR 2207 | <<locked>> | 80% | 38,754 psi | 75% | 3215 fps | 100% |
| ADI AR 2219 | <<locked>> | 82% | 36,724 psi | 71% | 3202 fps | 95.3% |
| Alliant AR-Comp | <<locked>> | 80% | 25,628 psi | 49% | 2900 fps | 95.2% |
| Alliant Reloder-10x | <<locked>> | 80% | 32,271 psi | 62% | 3064 fps | 96.9% |
| Alliant Reloder-7 | <<locked>> | 80% | 40,147 psi | 77% | 3212 fps | 99.2% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 35,534 psi | 68% | 3045 fps | 95.7% |
| Hodgdon H322 | <<locked>> | 84% | 35,926 psi | 69% | 3182 fps | 95% |
| Hodgdon H335 | <<locked>> | 86% | 39,044 psi | 75% | 3251 fps | 95% |
| Hodgdon H4198 | <<locked>> | 80% | 40,814 psi | 78% | 3192 fps | 96.2% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,438 psi | 45% | 1975 fps | 100% |
| IMR 3031 | <<locked>> | 90% | 33,924 psi | 65% | 3186 fps | 95.2% |
| IMR 4198 | <<locked>> | 80% | 34,345 psi | 66% | 3087 fps | 98.4% |
| Lovex D073.4 | <<locked>> | 84% | 43,178 psi | 83% | 3337 fps | 95.2% |
| Norma 200 | <<locked>> | 80% | 36,709 psi | 71% | 3173 fps | 98.8% |
| Norma 202 | <<locked>> | 94% | 39,624 psi | 76% | 3271 fps | 95.3% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,032 psi | 44% | 2014 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 90% | 43,845 psi | 84% | 3340 fps | 95.2% |
| Rottweil R 901 | <<locked>> | 92% | 40,901 psi | 79% | 3268 fps | 95.3% |
| Shooters World AR Plus | <<locked>> | 84% | 43,178 psi | 83% | 3337 fps | 95.2% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 41,510 psi | 80% | 3015 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 84% | 40,176 psi | 77% | 3274 fps | 95.2% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 33,098 psi | 64% | 3074 fps | 95% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 40,509 psi | 78% | 3189 fps | 95.4% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 36,593 psi | 70% | 3104 fps | 95.4% |
| Somchem S335 | <<locked>> | 90% | 36,724 psi | 71% | 3120 fps | 95.3% |
| Vihtavuori N120 | <<locked>> | 80% | 38,914 psi | 75% | 3173 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 31,241 psi | 60% | 2969 fps | 96.3% |
| Vihtavuori N133 | <<locked>> | 86% | 32,721 psi | 63% | 3018 fps | 95.8% |
| Vihtavuori N135 | <<locked>> | 90% | 30,908 psi | 59% | 3054 fps | 95.4% |
| Vihtavuori N140 | <<locked>> | 94% | 37,724 psi | 73% | 3189 fps | 95% |
| Vihtavuori N540 | <<locked>> | 98% | 41,742 psi | 80% | 3297 fps | 95.8% |
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 38 powders for .22 ARC loaded with the .224 | 50gr | Hornady ECX. Alliant AR-Comp delivers the highest muzzle velocity at 3,491 fps; across all powders the maximum-charge window runs from 2,198 fps to 3,491 fps. Accurate 2495 gives the best case fill at 100 %, and 38 of the 38 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (359 MPa), the top charges use 61–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.