top of page

Load data for .22 Ackley Hornet + .224 | 50gr Hornady CX

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): Hodgdon LilGun, Lovex S040

.22 Ackley Hornet + .224 | 50gr Hornady CX

Load Specifications

Bullet:
.224 | 50gr Hornady CX
Manufacturer SKU:
22402
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.760" | 19.3mm
Caliber:
.22 Ackley Hornet
Case Length (l3):
1.403" | 35.6mm
Cartridge Length (C.O.L.):
1.694" | 43.0mm
Seated Depth:
0.469" | 11.9mm
Shank Seated Depth:
0.469" | 11.9mm
Case Capacity:
15.6 Grains of Water | 1.01 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
43511 psi | 3000 bar
LID:
LID_B1378_C62

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 12 loads in caliber .22 Ackley Hornet with .224 | 50gr Hornady CX bullet and 6 powders such as Hodgdon LilGun, Lovex S040. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • Muzzle velocity vs. barrel length

    Every 1 inch additional barrel length increases muzzle velocity by approx. 5.3 fps

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
97%
39073
90%
**90
94%
[Accurate No. 11 FS]*
<<locked>>
96%
39682
91%
**69
92%
Hodgdon LilGun 👍
<<locked>>
96%
41452
95%
**46
100%
Lovex S040 👍
<<locked>>
93%
42960
99%
**98
99%
SNPE Vectan BA6 1/2
<<locked>>
97%
26063
60%
**90
98%
Vihtavuori N110
<<locked>>
96%
31038
71%
**67
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
87%
29617
68%
**03
90%
[Accurate No. 11 FS]*
<<locked>>
93%
36201
83%
**06
90%
Hodgdon LilGun
<<locked>>
81%
25309
58%
**18
96%
Lovex S040
<<locked>>
81%
30153
69%
**59
96%
[SNPE Vectan BA6 1/2]*
<<locked>>
80%
16984
39%
**98
92%
[Vihtavuori N110]*
<<locked>>
81%
20726
48%
**88
93%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page