top of page

Load data for .22 Ackley Hornet + .224 | 50gr | Hornady GMX

Recommended Powder(s):

.22 Ackley Hornet + .224 | 50gr | Hornady GMX

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 50gr | Hornady GMX
Manufacturer SKU:
22403
Bullet Weight:
50gr | 3.2g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.755" | 19.2mm
Caliber:
.22 Ackley Hornet load data
Case Length (l3):
1.403" | 35.6mm
Cartridge Length (C.O.L.):
1.694" | 43.0mm
Seated Depth:
0.464" | 11.8mm
Shank Seated Depth:
0.404" | 10.3mm
Case Capacity:
15.6 Grains of Water | 1.01 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
43511 psi | 3000 bar
LID:
LID_B2505_C62
Last updated:
2025-01-01
Recommended Twist Rate:
1:11 - 1:9

Load data for 12 loads in caliber .22 Ackley Hornet with .224 | 50gr | Hornady GMX bullet and 6 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service. 

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
96%
38348
88%
**80
94%
[Accurate No. 11 FS]*
<<locked>>
95%
38870
89%
**65
92%
Hodgdon LilGun 👍
<<locked>>
93%
38667
89%
**10
100%
Lovex S040
<<locked>>
88%
38043
87%
**23
98%
SNPE Vectan BA6 1/2
<<locked>>
96%
25628
59%
**83
98%
Vihtavuori N110
<<locked>>
97%
32169
74%
**97
98%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[ADI AR 2205]*
<<locked>>
86%
28819
66%
**90
90%
[Accurate No. 11 FS]*
<<locked>>
92%
35462
82%
**03
90%
Hodgdon LilGun
<<locked>>
82%
25933
60%
**41
97%
Lovex S040
<<locked>>
82%
31067
71%
**88
97%
[SNPE Vectan BA6 1/2]*
<<locked>>
81%
17666
41%
**31
92%
[Vihtavuori N110]*
<<locked>>
80%
20117
46%
**78
92%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page