
Load Specifications
Load data in caliber .22-250 Rem. with .224 | 36gr | Barnes Varmint Grenade FB bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Hodgdon H322 and SNPE Vectan SP 10.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 84% | 50,821 psi | 87% | 3904 fps | 99.5% |
| Accurate 2015 | <<locked>> | 98% | 51,996 psi | 89% | 4003 fps | 99.1% |
| Accurate 2460 | <<locked>> | 94% | 51,474 psi | 88% | 3990 fps | 96.5% |
| Accurate 2495ᴾ | <<locked>> | 100% | 43,714 psi | 74% | 3868 fps | 98% |
| Accurate LT-30 | <<locked>> | 90% | 51,358 psi | 87% | 3917 fps | 97.9% |
| Accurate LT-32 | <<locked>> | 90% | 51,721 psi | 88% | 3921 fps | 96% |
| ADI AR 2207 | <<locked>> | 88% | 50,952 psi | 87% | 4012 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 50,096 psi | 85% | 4026 fps | 97.5% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 51,619 psi | 88% | 4108 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 94% | 52,054 psi | 89% | 4055 fps | 99.6% |
| Alliant Reloder-7 | <<locked>> | 88% | 52,939 psi | 90% | 4012 fps | 99.8% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 50,908 psi | 87% | 3878 fps | 98.2% |
| Hodgdon H322 | <<locked>> | 96% | 50,531 psi | 86% | 4035 fps | 97.6% |
| Hodgdon H335 | <<locked>> | 90% | 49,995 psi | 85% | 3996 fps | 96.5% |
| Hodgdon H4198 | <<locked>> | 90% | 52,605 psi | 90% | 3980 fps | 97.5% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,647 psi | 54% | 2667 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 43,859 psi | 75% | 3944 fps | 96.9% |
| IMR 4198 | <<locked>> | 92% | 49,966 psi | 85% | 3986 fps | 99.8% |
| IMR 4227 | <<locked>> | 84% | 52,765 psi | 90% | 3990 fps | 100% |
| Lovex S053 | <<locked>> | 84% | 51,256 psi | 87% | 3924 fps | 100% |
| Norma 200 | <<locked>> | 90% | 52,489 psi | 89% | 4042 fps | 99.9% |
| Norma 202ᴾ | <<locked>> | 100% | 49,966 psi | 85% | 3993 fps | 96.5% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,676 psi | 54% | 2730 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 84% | 53,055 psi | 90% | 4019 fps | 100% |
| Rottweil R 901 | <<locked>> | 98% | 51,097 psi | 87% | 3996 fps | 96.4% |
| SNPE Vectan BA6 1/2 | <<locked>> | 88% | 51,750 psi | 88% | 3740 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 50,908 psi | 87% | 4019 fps | 96.6% |
| SNPE Vectan SP 3 | <<locked>> | 94% | 52,765 psi | 90% | 4062 fps | 98.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 50,125 psi | 85% | 3894 fps | 96.3% |
| Somchem S335ᴾ | <<locked>> | 100% | 51,866 psi | 88% | 3944 fps | 97.8% |
| Vihtavuori N120 | <<locked>> | 90% | 50,488 psi | 86% | 3937 fps | 100% |
| Vihtavuori N130 | <<locked>> | 96% | 51,605 psi | 88% | 3963 fps | 99.5% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 48,211 psi | 82% | 3891 fps | 98.5% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 44,469 psi | 76% | 3888 fps | 98.1% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 46,543 psi | 79% | 3881 fps | 96.1% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 44,483 psi | 76% | 3763 fps | 98.6% |
| Accurate 2015 | <<locked>> | 88% | 37,289 psi | 63% | 3652 fps | 95.7% |
| Accurate 2460 | <<locked>> | 92% | 47,834 psi | 81% | 3907 fps | 95.6% |
| Accurate 2495 | <<locked>> | 94% | 35,157 psi | 60% | 3638 fps | 95.5% |
| Accurate LT-30 | <<locked>> | 84% | 42,641 psi | 73% | 3717 fps | 95.8% |
| Accurate LT-32 | <<locked>> | 88% | 48,675 psi | 83% | 3858 fps | 95.2% |
| ADI AR 2207 | <<locked>> | 80% | 39,233 psi | 67% | 3747 fps | 99.8% |
| ADI AR 2219 | 33.3 gr | 86% | 43,613 psi | 74% | 3871 fps | 95.8% |
| Alliant AR-Comp | <<locked>> | 84% | 29,936 psi | 51% | 3507 fps | 95.3% |
| Alliant Reloder-10x | <<locked>> | 80% | 33,069 psi | 56% | 3563 fps | 95.2% |
| Alliant Reloder-7 | <<locked>> | 80% | 40,915 psi | 70% | 3740 fps | 98.3% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 38,609 psi | 66% | 3589 fps | 95% |
| Hodgdon H322 | 32.7 gr | 90% | 41,220 psi | 70% | 3809 fps | 95% |
| Hodgdon H335 | <<locked>> | 88% | 46,528 psi | 79% | 3917 fps | 95.6% |
| Hodgdon H4198 | <<locked>> | 84% | 43,656 psi | 74% | 3773 fps | 95.3% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,250 psi | 40% | 2408 fps | 100% |
| IMR 3031 | <<locked>> | 96% | 38,493 psi | 66% | 3793 fps | 95% |
| IMR 4198 | <<locked>> | 80% | 34,635 psi | 59% | 3589 fps | 96.9% |
| IMR 4227 | <<locked>> | 80% | 46,398 psi | 79% | 3858 fps | 99.9% |
| Lovex S053 | <<locked>> | 80% | 45,600 psi | 78% | 3809 fps | 100% |
| Norma 200 | <<locked>> | 80% | 37,507 psi | 64% | 3684 fps | 97.6% |
| Norma 202 | <<locked>> | 98% | 46,862 psi | 80% | 3927 fps | 95.8% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,090 psi | 39% | 2461 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 46,412 psi | 79% | 3881 fps | 99.9% |
| Rottweil R 901 | <<locked>> | 96% | 48,066 psi | 82% | 3927 fps | 95.6% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 41,684 psi | 71% | 3556 fps | 100% |
| SNPE Vectan SP 10 | 35.2 gr | 88% | 47,442 psi | 81% | 3940 fps | 95.7% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 40,654 psi | 69% | 3776 fps | 95.8% |
| SNPE Vectan Tubal 3000 | <<locked>> | 96% | 46,963 psi | 80% | 3825 fps | 95.6% |
| Somchem S335 | <<locked>> | 94% | 42,772 psi | 73% | 3740 fps | 95.5% |
| Vihtavuori N120 | <<locked>> | 80% | 36,869 psi | 63% | 3632 fps | 99.9% |
| Vihtavuori N130 | <<locked>> | 82% | 33,156 psi | 56% | 3497 fps | 95.1% |
| Vihtavuori N133 | <<locked>> | 92% | 37,376 psi | 64% | 3622 fps | 95.7% |
| Vihtavuori N135 | <<locked>> | 94% | 35,998 psi | 61% | 3665 fps | 95.5% |
| Vihtavuori N140 | <<locked>> | 98% | 43,656 psi | 74% | 3809 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for .22-250 Rem. loaded with the .224 | 36gr | Barnes Varmint Grenade FB. Alliant AR-Comp delivers the highest muzzle velocity at 4,108 fps; across all powders the maximum-charge window runs from 2,667 fps to 4,108 fps. Accurate 2495 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (405 MPa), the top charges use 54–90 %, leaving at least 10 % headroom. The 36.0 gr projectile in 0.224" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Hodgdon H322, SNPE Vectan SP 10 rank at the top here: for .22-250 Rem. with the .224 | 36gr | Barnes Varmint Grenade FB they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.