
Load Specifications
Load data in caliber .22-250 Rem. with .224 | 35gr | IBEX TRD bullet and 36 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, SNPE Vectan SP 3 and Alliant Reloder-10x.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 84% | 51,605 psi | 88% | 3953 fps | 99.5% |
| Accurate 2015 | <<locked>> | 98% | 52,953 psi | 90% | 4055 fps | 99.1% |
| Accurate 2460 | <<locked>> | 94% | 52,446 psi | 89% | 4039 fps | 96.5% |
| Accurate 2495ᴾ | <<locked>> | 100% | 45,092 psi | 77% | 3930 fps | 98.1% |
| Accurate 2520 | <<locked>> | 98% | 52,997 psi | 90% | 4085 fps | 96.3% |
| Accurate LT-30 | <<locked>> | 90% | 51,924 psi | 88% | 3963 fps | 97.8% |
| Accurate LT-32 | <<locked>> | 90% | 52,315 psi | 89% | 3970 fps | 95.9% |
| ADI AR 2207 | <<locked>> | 88% | 51,503 psi | 88% | 4058 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 50,792 psi | 86% | 4075 fps | 97.4% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 52,330 psi | 89% | 4157 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 94% | 52,997 psi | 90% | 4111 fps | 99.6% |
| Alliant Reloder-7 | <<locked>> | 86% | 50,328 psi | 86% | 3996 fps | 99.6% |
| Baschieri & Pellagri 106 | <<locked>> | 90% | 51,517 psi | 88% | 3924 fps | 98.2% |
| Hodgdon H322 | <<locked>> | 94% | 52,156 psi | 89% | 4101 fps | 97.7% |
| Hodgdon H335 | <<locked>> | 92% | 50,705 psi | 86% | 4045 fps | 96.5% |
| Hodgdon H4198 | <<locked>> | 86% | 50,662 psi | 86% | 3973 fps | 96.9% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,937 psi | 54% | 2707 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 49,850 psi | 85% | 4117 fps | 98.1% |
| IMR 4198 | <<locked>> | 92% | 50,256 psi | 86% | 4032 fps | 99.8% |
| IMR 4227 | <<locked>> | 84% | 53,156 psi | 90% | 4035 fps | 100% |
| Lovex S053 | <<locked>> | 84% | 51,735 psi | 88% | 3973 fps | 100% |
| Norma 200 | <<locked>> | 88% | 50,053 psi | 85% | 4026 fps | 99.7% |
| Norma 202ᴾ | <<locked>> | 100% | 50,749 psi | 86% | 4042 fps | 96.5% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 32,010 psi | 54% | 2769 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 50,285 psi | 86% | 3999 fps | 100% |
| Rottweil R 901 | <<locked>> | 98% | 51,851 psi | 88% | 4045 fps | 96.4% |
| SNPE Vectan BA6 1/2 | <<locked>> | 88% | 52,634 psi | 90% | 3796 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 51,605 psi | 88% | 4065 fps | 96.5% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 50,125 psi | 85% | 4042 fps | 98% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 50,966 psi | 87% | 3944 fps | 96.3% |
| Somchem S335ᴾ | <<locked>> | 100% | 52,692 psi | 90% | 3993 fps | 97.7% |
| Vihtavuori N120 | <<locked>> | 88% | 51,416 psi | 88% | 3996 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 50,140 psi | 85% | 3963 fps | 99.2% |
| Vihtavuori N133 | <<locked>> | 98% | 49,980 psi | 85% | 3953 fps | 98.6% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 45,165 psi | 77% | 3937 fps | 98% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 48,037 psi | 82% | 3940 fps | 96.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 44,976 psi | 77% | 3812 fps | 98.6% |
| Accurate 2015 | <<locked>> | 88% | 38,377 psi | 65% | 3711 fps | 95.8% |
| Accurate 2460 | <<locked>> | 92% | 48,834 psi | 83% | 3963 fps | 95.7% |
| Accurate 2495 | <<locked>> | 94% | 36,535 psi | 62% | 3707 fps | 95.7% |
| Accurate 2520 | <<locked>> | 96% | 49,211 psi | 84% | 4003 fps | 95.3% |
| Accurate LT-30 | <<locked>> | 84% | 42,960 psi | 73% | 3757 fps | 95.7% |
| Accurate LT-32 | <<locked>> | 88% | 49,255 psi | 84% | 3904 fps | 95.1% |
| ADI AR 2207 | <<locked>> | 80% | 39,929 psi | 68% | 3799 fps | 99.7% |
| ADI AR 2219 | <<locked>> | 86% | 43,990 psi | 75% | 3911 fps | 95.7% |
| Alliant AR-Comp | <<locked>> | 84% | 30,850 psi | 53% | 3570 fps | 95.5% |
| Alliant Reloder-10x | 28.5 gr | 80% | 33,823 psi | 58% | 3619 fps | 95.3% |
| Alliant Reloder-7 | <<locked>> | 80% | 41,568 psi | 71% | 3789 fps | 98.2% |
| Baschieri & Pellagri 106 | <<locked>> | 82% | 39,334 psi | 67% | 3638 fps | 95.1% |
| Hodgdon H322 | 33.2 gr | 88% | 42,830 psi | 73% | 3885 fps | 95.3% |
| Hodgdon H335 | <<locked>> | 90% | 47,268 psi | 80% | 3963 fps | 95.6% |
| Hodgdon H4198 | <<locked>> | 82% | 44,440 psi | 76% | 3822 fps | 95.3% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,612 psi | 40% | 2448 fps | 100% |
| IMR 3031 | <<locked>> | 94% | 40,799 psi | 69% | 3888 fps | 95.7% |
| IMR 4198 | <<locked>> | 80% | 35,186 psi | 60% | 3638 fps | 96.8% |
| IMR 4227 | <<locked>> | 80% | 46,847 psi | 80% | 3904 fps | 99.9% |
| Lovex S053 | <<locked>> | 80% | 46,180 psi | 79% | 3862 fps | 100% |
| Norma 200 | <<locked>> | 80% | 38,421 psi | 65% | 3740 fps | 97.7% |
| Norma 202 | <<locked>> | 98% | 47,732 psi | 81% | 3976 fps | 95.8% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,525 psi | 40% | 2500 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 47,340 psi | 81% | 3937 fps | 99.9% |
| Rottweil R 901 | <<locked>> | 96% | 48,863 psi | 83% | 3976 fps | 95.6% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 42,322 psi | 72% | 3602 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 88% | 48,225 psi | 82% | 3990 fps | 95.7% |
| SNPE Vectan SP 3 | 30.7 gr | 86% | 41,423 psi | 71% | 3832 fps | 95.8% |
| SNPE Vectan Tubal 3000 | <<locked>> | 96% | 47,834 psi | 81% | 3878 fps | 95.6% |
| Somchem S335 | <<locked>> | 94% | 43,700 psi | 74% | 3796 fps | 95.6% |
| Vihtavuori N120 | <<locked>> | 80% | 40,001 psi | 68% | 3750 fps | 100% |
| Vihtavuori N130 | <<locked>> | 82% | 34,693 psi | 59% | 3570 fps | 95.5% |
| Vihtavuori N133 | <<locked>> | 88% | 36,318 psi | 62% | 3615 fps | 95% |
| Vihtavuori N135 | <<locked>> | 94% | 36,883 psi | 63% | 3720 fps | 95.6% |
| Vihtavuori N140 | <<locked>> | 98% | 45,107 psi | 77% | 3871 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 36 powders for .22-250 Rem. loaded with the .224 | 35gr | IBEX TRD. Alliant AR-Comp delivers the highest muzzle velocity at 4,157 fps; across all powders the maximum-charge window runs from 2,707 fps to 4,157 fps. Accurate 2495 gives the best case fill at 100 %, and 36 of the 36 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (405 MPa), the top charges use 54–90 %, leaving at least 10 % headroom. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, SNPE Vectan SP 3, Alliant Reloder-10x rank at the top here: for .22-250 Rem. with the .224 | 35gr | IBEX TRD they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.