Load data for .219 Zipper + .227 | 45gr | Reichenberg Spezial Jagd

.219 Zipper cartridge drawing
Reichenberg logo

Load Specifications

Bullet Manufacturer:Reichenberg
Bullet Weight:45 gr
Bullet Diameter:0.227"
Bullet Length:<<locked>>
Case Length (l3):1.933"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:41,336 psi

Load data in caliber .219 Zipper with .227 | 45gr | Reichenberg Spezial Jagd bullet and 9 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 2495ᴾ<<locked>>100%37,260 psi90%3245 fps96.7%
Alliant AR-Comp<<locked>>94%37,101 psi90%3271 fps98.6%
Alliant Reloder-10x<<locked>>86%35,926 psi87%3182 fps96.9%
Hodgdon TrailBossᴾ<<locked>>100%31,024 psi75%2224 fps100%
IMR 4198<<locked>>84%35,549 psi86%3133 fps97.6%
Norma 200<<locked>>82%35,694 psi86%3159 fps97.5%
ReloadSwiss RS 14ᴾ<<locked>>100%30,835 psi75%2274 fps100%
Vihtavuori N130<<locked>>88%36,970 psi89%3136 fps96.9%
Vihtavuori N135<<locked>>98%36,216 psi88%3205 fps96%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>98%34,563 psi84%3176 fps95.8%
Alliant AR-Comp23.8 gr86%28,689 psi69%3012 fps95.2%
Alliant Reloder-10x<<locked>>82%31,459 psi76%3058 fps95.2%
Hodgdon TrailBoss7.7 gr80%22,800 psi55%2001 fps100%
IMR 4198<<locked>>80%31,589 psi76%3018 fps96.1%
Norma 200<<locked>>80%33,678 psi81%3107 fps96.9%
ReloadSwiss RS 147.9 gr80%22,785 psi55%2054 fps100%
Vihtavuori N130<<locked>>84%32,489 psi79%3015 fps95.3%
Vihtavuori N135<<locked>>96%34,142 psi83%3146 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 9 powders for .219 Zipper loaded with the .227 | 45gr | Reichenberg Spezial Jagd. Alliant AR-Comp delivers the highest muzzle velocity at 3,271 fps; across all powders the maximum-charge window runs from 2,224 fps to 3,271 fps. Accurate 2495 gives the best case fill at 100 %, and 9 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (285 MPa), the top charges use 75–90 %, leaving at least 10 % headroom. Accurate 2495, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .219 Zipper with the .227 | 45gr | Reichenberg Spezial Jagd they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data