Load data for .219 Zipper + .224 | 55gr | Speer FMJ

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 55gr \| Speer FMJ
Manufacturer SKU:	1044
Bullet Weight:	55gr \| 3.6g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.720" \| 18.3mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.427" \| 10.8mm
Shank Seated Depth:	0.336" \| 8.5mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B6061_C58
Last updated:	2025-02-02
Recommended Twist Rate:	1:12 - 1:10

Load data for 54 loads in caliber .219 Zipper with .224 | 55gr | Speer FMJ bullet and 27 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	86%	36622	89%	**17	98%
[Accurate 2460]*	<<locked>>	84%	36056	87%	**90	92%
Accurate 2495	<<locked>>	91%	36216	88%	**92	98%
[Accurate 2520]*	<<locked>>	89%	36187	88%	**53	94%
Accurate 4064	<<locked>>	97%	36230	88%	**76	95%
Alliant AR-Comp 👍	<<locked>>	89%	36143	87%	**89	99%
[Hodgdon Benchmark]*	<<locked>>	86%	37043	90%	**71	92%
Hodgdon H322	<<locked>>	86%	36129	87%	**30	96%
Hodgdon TrailBoss	<<locked>>	95%	30110	73%	**75	100%
IMR 3031	<<locked>>	94%	36753	89%	**09	97%
[Lovex D073.4]*	<<locked>>	83%	37086	90%	**04	93%
[Lovex D073.5]*	<<locked>>	84%	36056	87%	**90	92%
[Lovex D073.6]*	<<locked>>	92%	36811	89%	**63	94%
Norma 202	<<locked>>	90%	36216	88%	**33	95%
ReloadSwiss RS 14	<<locked>>	95%	29892	72%	**14	100%
[ReloadSwiss RS 40]*	<<locked>>	83%	35926	87%	**90	93%
[Rottweil R 901]*	<<locked>>	87%	36303	88%	**00	94%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	36477	88%	**38	94%
SNPE Vectan Tubal 5000	<<locked>>	95%	36521	88%	**54	96%
[Shooters World Match Rifle]*	<<locked>>	92%	36811	89%	**63	94%
Somchem S335	<<locked>>	89%	36680	89%	**67	96%
Vihtavuori N130	<<locked>>	85%	36564	88%	**67	98%
Vihtavuori N133	<<locked>>	91%	36593	89%	**81	97%
Vihtavuori N135	<<locked>>	96%	32227	78%	**38	96%
Vihtavuori N140	<<locked>>	92%	36042	87%	**04	95%
[Vihtavuori N530]*	<<locked>>	87%	37072	90%	**33	92%
[Vihtavuori N540]*	<<locked>>	92%	35795	87%	**10	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
Accurate 2015	<<locked>>	81%	31502	76%	**85	96%
[Accurate 2460]*	<<locked>>	81%	32372	78%	**92	91%
[Accurate 2495]*	<<locked>>	81%	25106	61%	**71	93%
[Accurate 2520]*	<<locked>>	84%	29849	72%	**79	90%
[Accurate 4064]*	<<locked>>	88%	26789	65%	**03	90%
Alliant AR-Comp	<<locked>>	81%	27891	67%	**53	97%
[Hodgdon Benchmark]*	<<locked>>	82%	33272	80%	**72	90%
[Hodgdon H322]*	<<locked>>	81%	31009	75%	**89	93%
Hodgdon TrailBoss	<<locked>>	82%	24453	59%	**31	100%
[IMR 3031]*	<<locked>>	82%	25338	61%	**54	91%
[Lovex D073.4]*	<<locked>>	81%	34229	83%	**35	91%
[Lovex D073.5]*	<<locked>>	81%	32372	78%	**92	91%
[Lovex D073.6]*	<<locked>>	86%	29298	71%	**66	90%
[Norma 202]*	<<locked>>	82%	27746	67%	**87	90%
ReloadSwiss RS 14	<<locked>>	82%	24395	59%	**73	100%
[ReloadSwiss RS 40]*	<<locked>>	81%	33402	81%	**31	92%
[Rottweil R 901]*	<<locked>>	81%	30153	73%	**26	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	81%	28950	70%	**38	91%
[SNPE Vectan Tubal 5000]*	<<locked>>	83%	25440	62%	**36	90%
[Shooters World Match Rifle]*	<<locked>>	86%	29298	71%	**66	90%
[Somchem S335]*	<<locked>>	81%	28384	69%	**44	92%
Vihtavuori N130	<<locked>>	81%	32866	80%	**79	97%
[Vihtavuori N133]*	<<locked>>	81%	26948	65%	**08	93%
[Vihtavuori N135]*	<<locked>>	86%	23888	58%	**66	91%
[Vihtavuori N140]*	<<locked>>	83%	26977	65%	**38	90%
[Vihtavuori N530]*	<<locked>>	84%	34606	84%	**67	90%
[Vihtavuori N540]*	<<locked>>	86%	28848	70%	**20	91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.