Load data for .219 Zipper + .224 | 55gr | CutEdge MTH

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 55gr \| CutEdge MTH
Manufacturer SKU:	MTH B55
Bullet Weight:	55gr \| 3.6g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.869" \| 22.1mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.576" \| 14.6mm
Shank Seated Depth:	0.441" \| 11.2mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B8404_C58
Last updated:	2025-01-01
Recommended Twist Rate:	1:9 - 1:8

Load data for 62 loads in caliber .219 Zipper with .224 | 55gr | CutEdge MTH bullet and 31 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2219	<<locked>>	83%	36361	88%	**27	95%
Accurate 2015	<<locked>>	88%	36550	88%	**04	98%
[Accurate 2460]*	<<locked>>	87%	36956	89%	**07	92%
Accurate 2495	<<locked>>	95%	37144	90%	**09	98%
[Accurate 2520]*	<<locked>>	93%	37086	90%	**66	94%
[Accurate 4064]*	<<locked>>	97%	31981	77%	**61	93%
Alliant AR-Comp 👍	<<locked>>	92%	35766	87%	**69	99%
Alliant Reloder-10x	<<locked>>	85%	35694	86%	**04	98%
Hodgdon H322	<<locked>>	88%	36361	88%	**27	95%
[Hodgdon H335]*	<<locked>>	83%	36172	88%	**17	94%
Hodgdon TrailBoss	<<locked>>	94%	28979	70%	**36	100%
IMR 3031	<<locked>>	96%	35650	86%	**72	96%
IMR 4198	<<locked>>	84%	36956	89%	**90	99%
[Lovex D073.4]*	<<locked>>	85%	36593	89%	**87	92%
[Lovex D073.5]*	<<locked>>	88%	36956	89%	**07	92%
[Lovex D073.6]*	<<locked>>	95%	36434	88%	**46	93%
[Norma 202]*	<<locked>>	93%	36506	88%	**30	94%
ReloadSwiss RS 14	<<locked>>	94%	28718	69%	**78	100%
[ReloadSwiss RS 40]*	<<locked>>	86%	36347	88%	**94	93%
[Rottweil R 901]*	<<locked>>	90%	35911	87%	**84	94%
[SNPE Vectan SP 10]*	<<locked>>	83%	36738	89%	**27	94%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	36738	89%	**38	94%
SNPE Vectan Tubal 5000	<<locked>>	97%	35897	87%	**31	95%
[Shooters World Match Rifle]*	<<locked>>	95%	36434	88%	**46	93%
[Somchem S321]*	<<locked>>	88%	36999	90%	**20	91%
Somchem S335	<<locked>>	92%	36869	89%	**67	95%
Vihtavuori N130	<<locked>>	87%	36666	89%	**64	98%
Vihtavuori N133	<<locked>>	94%	36796	89%	**67	97%
[Vihtavuori N135]*	<<locked>>	96%	29660	72%	**56	94%
Vihtavuori N140	<<locked>>	95%	36463	88%	**00	95%
[Vihtavuori N540]*	<<locked>>	96%	37072	90%	**40	94%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	33562	81%	**61	94%
Accurate 2015	<<locked>>	81%	28500	69%	**90	95%
[Accurate 2460]*	<<locked>>	84%	32750	79%	**05	90%
[Accurate 2495]*	<<locked>>	81%	21988	53%	**62	90%
[Accurate 2520]*	<<locked>>	87%	30139	73%	**82	90%
[Accurate 4064]*	<<locked>>	92%	27108	66%	**20	90%
Alliant AR-Comp	<<locked>>	81%	25034	61%	**38	95%
Alliant Reloder-10x	<<locked>>	81%	31647	77%	**02	97%
[Hodgdon H322]*	<<locked>>	81%	28776	70%	**10	91%
[Hodgdon H335]*	<<locked>>	81%	33504	81%	**44	93%
Hodgdon TrailBoss	<<locked>>	80%	23192	56%	**88	100%
[IMR 3031]*	<<locked>>	86%	25991	63%	**71	91%
IMR 4198	<<locked>>	81%	34113	83%	**25	98%
[Lovex D073.4]*	<<locked>>	83%	33518	81%	**12	91%
[Lovex D073.5]*	<<locked>>	84%	32750	79%	**05	90%
[Lovex D073.6]*	<<locked>>	90%	30719	74%	**95	90%
[Norma 202]*	<<locked>>	86%	28819	70%	**13	90%
ReloadSwiss RS 14	<<locked>>	80%	22974	56%	**31	100%
[ReloadSwiss RS 40]*	<<locked>>	82%	32169	78%	**85	91%
[Rottweil R 901]*	<<locked>>	83%	29515	71%	**07	90%
[SNPE Vectan SP 10]*	<<locked>>	81%	33982	82%	**51	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	83%	28776	70%	**25	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	87%	26223	63%	**56	90%
[Shooters World Match Rifle]*	<<locked>>	90%	30719	74%	**95	90%
[Somchem S321]*	<<locked>>	86%	34200	83%	**58	90%
[Somchem S335]*	<<locked>>	81%	26034	63%	**69	90%
Vihtavuori N130	<<locked>>	81%	30052	73%	**90	96%
[Vihtavuori N133]*	<<locked>>	81%	24772	60%	**26	91%
[Vihtavuori N135]*	<<locked>>	90%	24381	59%	**79	91%
[Vihtavuori N140]*	<<locked>>	87%	27876	67%	**57	90%
[Vihtavuori N540]*	<<locked>>	89%	29472	71%	**26	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.