Load data for .219 Zipper + .224 | 50gr Hornady ECX

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 50gr Hornady ECX
Manufacturer SKU:	224034
Bullet Weight:	50gr \| 3.2g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	<<locked>>
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B1380_C58
Last updated:	2026-03-16

Load data for 46 loads in caliber .219 Zipper with .224 | 50gr Hornady ECX bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	83%	36927	89%	**25	100%
[ADI AR 2219]*	<<locked>>	87%	36927	89%	**35	94%
Accurate 2015	<<locked>>	92%	36622	89%	**09	96%
Accurate 2495	<<locked>>	96%	32140	78%	**89	95%
Alliant AR-Comp	<<locked>>	96%	36811	89%	**91	98%
Alliant Reloder-10x	<<locked>>	89%	36724	89%	**35	97%
[Baschieri & Pellagri 106]*	<<locked>>	85%	36608	89%	**07	94%
[Hodgdon H322]*	<<locked>>	92%	36927	89%	**35	94%
[Hodgdon H335]*	<<locked>>	86%	35926	87%	**95	92%
Hodgdon TrailBoss	<<locked>>	96%	28863	70%	**11	100%
[IMR 3031]*	<<locked>>	96%	31865	77%	**46	92%
IMR 4198	<<locked>>	86%	36056	87%	**66	98%
Norma 200	<<locked>>	85%	35897	87%	**95	98%
[Norma 202]*	<<locked>>	96%	35230	85%	**82	92%
ReloadSwiss RS 14	<<locked>>	96%	28442	69%	**57	100%
[Rottweil R 901]*	<<locked>>	94%	36143	87%	**82	92%
[SNPE Vectan SP 10]*	<<locked>>	87%	37159	90%	**31	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	94%	36579	88%	**23	92%
[Somchem S335]*	<<locked>>	95%	35708	86%	**30	93%
Vihtavuori N120	<<locked>>	85%	35882	87%	**53	100%
Vihtavuori N130	<<locked>>	91%	37159	90%	**79	97%
Vihtavuori N133	<<locked>>	96%	35070	85%	**27	95%
[Vihtavuori N140]*	<<locked>>	97%	34301	83%	**23	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33721	82%	**49	99%
[ADI AR 2219]*	<<locked>>	81%	30066	73%	**35	90%
[Accurate 2015]*	<<locked>>	81%	24831	60%	**71	91%
[Accurate 2495]*	<<locked>>	90%	25454	62%	**92	91%
[Alliant AR-Comp]*	<<locked>>	81%	22582	55%	**15	90%
[Alliant Reloder-10x]*	<<locked>>	81%	28297	68%	**99	94%
[Baschieri & Pellagri 106]*	<<locked>>	81%	31430	76%	**76	92%
[Hodgdon H322]*	<<locked>>	86%	30066	73%	**35	90%
[Hodgdon H335]*	<<locked>>	84%	33257	80%	**20	90%
Hodgdon TrailBoss	<<locked>>	81%	22843	55%	**60	100%
[IMR 3031]*	<<locked>>	94%	29298	71%	**64	91%
IMR 4198	<<locked>>	81%	30560	74%	**12	96%
Norma 200	<<locked>>	81%	31589	76%	**90	96%
[Norma 202]*	<<locked>>	93%	32445	78%	**13	90%
ReloadSwiss RS 14	<<locked>>	82%	22611	55%	**00	100%
[Rottweil R 901]*	<<locked>>	91%	33315	81%	**04	90%
[SNPE Vectan SP 10]*	<<locked>>	83%	32808	79%	**13	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	90%	32329	78%	**15	90%
[Somchem S335]*	<<locked>>	88%	29356	71%	**59	90%
Vihtavuori N120	<<locked>>	81%	31546	76%	**48	99%
[Vihtavuori N130]*	<<locked>>	81%	26513	64%	**77	92%
[Vihtavuori N133]*	<<locked>>	86%	26440	64%	**67	91%
[Vihtavuori N140]*	<<locked>>	94%	31546	76%	**51	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data