Load data for .219 Zipper + .224 | 50gr | Rhino Penetrator

.219 Zipper cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.933"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:41,336 psi

Load data in caliber .219 Zipper with .224 | 50gr | Rhino Penetrator bullet and 10 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, Vihtavuori N135 and Accurate 2495.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>88%35,273 psi85%3002 fps96.4%
Accurate 2495<<locked>>96%34,679 psi84%3051 fps96.8%
Alliant AR-Comp<<locked>>92%36,753 psi89%3133 fps99.2%
Alliant Reloder-10x<<locked>>84%35,708 psi86%3041 fps97.7%
Hodgdon TrailBossᴾ<<locked>>100%31,502 psi76%2113 fps100%
IMR 4198<<locked>>82%35,317 psi85%2992 fps98.3%
ReloadSwiss RS 14ᴾ<<locked>>100%31,415 psi76%2162 fps100%
Vihtavuori N130<<locked>>86%36,709 psi89%2999 fps97.7%
Vihtavuori N133<<locked>>90%35,810 psi87%2979 fps96.4%
Vihtavuori N135<<locked>>96%35,984 psi87%3071 fps97%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>86%32,779 psi79%2936 fps95.5%
Accurate 249525.2 gr92%30,139 psi73%2930 fps95%
Alliant AR-Comp22.2 gr82%26,600 psi64%2822 fps95.3%
Alliant Reloder-10x<<locked>>80%31,227 psi76%2920 fps96.1%
Hodgdon TrailBoss<<locked>>80%23,467 psi57%1906 fps100%
IMR 4198<<locked>>80%33,257 psi80%2936 fps97.7%
ReloadSwiss RS 14<<locked>>80%23,090 psi56%1946 fps100%
Vihtavuori N130<<locked>>80%30,342 psi73%2828 fps95.5%
Vihtavuori N133<<locked>>88%33,765 psi82%2923 fps95.7%
Vihtavuori N13524.4 gr92%31,879 psi77%2959 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 10 powders for .219 Zipper loaded with the .224 | 50gr | Rhino Penetrator. Alliant AR-Comp delivers the highest muzzle velocity at 3,133 fps; across all powders the maximum-charge window runs from 2,113 fps to 3,133 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 10 of the 10 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (285 MPa), the top charges use 76–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, Vihtavuori N135, Accurate 2495 rank at the top here: for .219 Zipper with the .224 | 50gr | Rhino Penetrator they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data