Load data for .219 Zipper + .224 | 50gr | Hornady V-MAX

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 50gr \| Hornady V-MAX
Manufacturer SKU:	22261
Bullet Weight:	50gr \| 3.2g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.800" \| 20.3mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.507" \| 12.9mm
Shank Seated Depth:	0.447" \| 11.4mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B2508_C58
Last updated:	2025-01-01
Recommended Twist Rate:	1:10 - 1:9

Load data for 46 loads in caliber .219 Zipper with .224 | 50gr | Hornady V-MAX bullet and 23 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	84%	37101	90%	**58	94%
Accurate 2015	<<locked>>	89%	36593	89%	**22	97%
Accurate 2495	<<locked>>	96%	37173	90%	**27	97%
Alliant AR-Comp 👍	<<locked>>	93%	36753	89%	**10	99%
Alliant Reloder-10x	<<locked>>	86%	36230	88%	**28	97%
Baschieri & Pellagri 106	<<locked>>	83%	36869	89%	**33	95%
[Hodgdon H322]*	<<locked>>	89%	36550	88%	**38	94%
[Hodgdon H335]*	<<locked>>	84%	36158	87%	**18	93%
Hodgdon TrailBoss	<<locked>>	94%	29008	70%	**34	100%
IMR 3031	<<locked>>	97%	35491	86%	**71	95%
IMR 4198	<<locked>>	84%	36071	87%	**82	98%
[Norma 202]*	<<locked>>	94%	36419	88%	**31	93%
ReloadSwiss RS 14	<<locked>>	94%	28747	70%	**77	100%
[Rottweil R 901]*	<<locked>>	90%	36303	88%	**95	92%
[SNPE Vectan SP 10]*	<<locked>>	83%	36013	87%	**18	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	36260	88%	**27	93%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	33910	82%	**74	93%
[Somchem S335]*	<<locked>>	93%	36941	89%	**76	94%
Vihtavuori N130	<<locked>>	88%	37188	90%	**92	97%
Vihtavuori N133	<<locked>>	95%	36970	89%	**82	96%
[Vihtavuori N135]*	<<locked>>	96%	28935	70%	**28	92%
[Vihtavuori N140]*	<<locked>>	95%	35853	87%	**89	93%
[Vihtavuori N540]*	<<locked>>	96%	36187	88%	**18	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	33170	80%	**49	93%
[Accurate 2015]*	<<locked>>	81%	27818	67%	**69	93%
[Accurate 2495]*	<<locked>>	84%	24526	59%	**56	91%
[Alliant AR-Comp]*	<<locked>>	81%	24918	60%	**30	93%
Alliant Reloder-10x	<<locked>>	81%	30792	74%	**84	95%
[Baschieri & Pellagri 106]*	<<locked>>	81%	34185	83%	**61	94%
[Hodgdon H322]*	<<locked>>	82%	29124	70%	**18	90%
[Hodgdon H335]*	<<locked>>	81%	32445	78%	**13	91%
Hodgdon TrailBoss	<<locked>>	80%	23279	56%	**83	100%
[IMR 3031]*	<<locked>>	89%	28311	68%	**51	91%
IMR 4198	<<locked>>	81%	33373	81%	**17	97%
[Norma 202]*	<<locked>>	89%	31401	76%	**97	90%
ReloadSwiss RS 14	<<locked>>	81%	23163	56%	**26	100%
[Rottweil R 901]*	<<locked>>	87%	32590	79%	**97	91%
[SNPE Vectan SP 10]*	<<locked>>	81%	33388	81%	**46	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	86%	31096	75%	**89	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	29283	71%	**43	90%
[Somchem S335]*	<<locked>>	84%	28660	69%	**40	90%
[Vihtavuori N130]*	<<locked>>	81%	29356	71%	**76	94%
[Vihtavuori N133]*	<<locked>>	82%	25251	61%	**38	90%
[Vihtavuori N135]*	<<locked>>	94%	26658	64%	**53	91%
[Vihtavuori N140]*	<<locked>>	91%	30806	75%	**41	90%
[Vihtavuori N540]*	<<locked>>	91%	31488	76%	**87	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.