Load data for .219 Zipper + .224 | 50gr | Berger Varmint

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 50gr \| Berger Varmint
Manufacturer SKU:	22307
Bullet Weight:	50gr \| 3.2g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.715" \| 18.2mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.422" \| 10.7mm
Shank Seated Depth:	0.422" \| 10.7mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B885_C58
Last updated:	2025-01-01

Load data for 54 loads in caliber .219 Zipper with .224 | 50gr | Berger Varmint bullet and 27 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	83%	36854	89%	**54	94%
Accurate 2015	<<locked>>	88%	36535	88%	**22	97%
Accurate 2495	<<locked>>	95%	36796	89%	**23	97%
[Accurate 2520]*	<<locked>>	93%	37173	90%	**77	92%
[Accurate 4064]*	<<locked>>	96%	31662	77%	**66	92%
Alliant AR-Comp 👍	<<locked>>	92%	36187	88%	**04	99%
Alliant Reloder-10x	<<locked>>	85%	35998	87%	**35	98%
[Hodgdon H322]*	<<locked>>	88%	36303	88%	**48	94%
[Hodgdon H335]*	<<locked>>	84%	36970	89%	**48	93%
Hodgdon TrailBoss	<<locked>>	95%	29573	72%	**57	100%
IMR 3031	<<locked>>	97%	36753	89%	**17	96%
IMR 4198	<<locked>>	83%	36608	89%	**09	98%
[Lovex D073.6]*	<<locked>>	94%	36158	87%	**54	92%
[Norma 202]*	<<locked>>	92%	35998	87%	**28	93%
ReloadSwiss RS 14	<<locked>>	95%	29269	71%	**00	100%
[ReloadSwiss RS 40]*	<<locked>>	85%	35839	87%	**99	91%
[Rottweil R 901]*	<<locked>>	89%	36230	88%	**02	93%
[SNPE Vectan SP 10]*	<<locked>>	83%	36985	89%	**54	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	90%	36680	89%	**56	93%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	35505	86%	**33	94%
[Shooters World Match Rifle]*	<<locked>>	94%	36158	87%	**54	92%
[Somchem S335]*	<<locked>>	91%	36680	89%	**79	94%
Vihtavuori N130	<<locked>>	87%	36898	89%	**89	98%
Vihtavuori N133	<<locked>>	93%	36753	89%	**89	96%
[Vihtavuori N135]*	<<locked>>	96%	29791	72%	**71	93%
[Vihtavuori N140]*	<<locked>>	95%	36056	87%	**99	93%
[Vihtavuori N540]*	<<locked>>	96%	37144	90%	**51	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	34214	83%	**86	93%
[Accurate 2015]*	<<locked>>	81%	29124	70%	**18	94%
[Accurate 2495]*	<<locked>>	82%	23540	57%	**23	90%
[Accurate 2520]*	<<locked>>	89%	33141	80%	**76	91%
[Accurate 4064]*	<<locked>>	92%	28340	69%	**64	90%
[Alliant AR-Comp]*	<<locked>>	81%	25933	63%	**82	94%
Alliant Reloder-10x	<<locked>>	81%	32227	78%	**33	96%
[Hodgdon H322]*	<<locked>>	81%	28935	70%	**28	90%
[Hodgdon H335]*	<<locked>>	81%	33286	81%	**49	92%
Hodgdon TrailBoss	<<locked>>	82%	23975	58%	**13	100%
[IMR 3031]*	<<locked>>	87%	27209	66%	**18	90%
IMR 4198	<<locked>>	81%	33808	82%	**36	98%
[Lovex D073.6]*	<<locked>>	91%	32227	78%	**53	90%
[Norma 202]*	<<locked>>	88%	30966	75%	**94	91%
ReloadSwiss RS 14	<<locked>>	82%	23873	58%	**55	100%
[ReloadSwiss RS 40]*	<<locked>>	83%	33257	80%	**27	90%
[Rottweil R 901]*	<<locked>>	85%	31328	76%	**67	90%
[SNPE Vectan SP 10]*	<<locked>>	81%	34374	83%	**86	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	84%	30284	73%	**79	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	89%	28384	69%	**30	90%
[Shooters World Match Rifle]*	<<locked>>	91%	32227	78%	**53	90%
[Somchem S335]*	<<locked>>	83%	28355	69%	**49	90%
Vihtavuori N130	<<locked>>	81%	30647	74%	**22	95%
[Vihtavuori N133]*	<<locked>>	81%	25164	61%	**51	91%
[Vihtavuori N135]*	<<locked>>	91%	25643	62%	**30	90%
[Vihtavuori N140]*	<<locked>>	89%	30023	73%	**35	90%
[Vihtavuori N540]*	<<locked>>	90%	30893	75%	**74	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.