Load data for .219 Zipper + .224 | 50gr | Berger Target FB

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 50gr \| Berger Target FB
Manufacturer SKU:	22406
Bullet Weight:	50gr \| 3.2g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.710" \| 18.0mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.417" \| 10.6mm
Shank Seated Depth:	0.417" \| 10.6mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B884_C58
Last updated:	2025-01-01

Load data for 54 loads in caliber .219 Zipper with .224 | 50gr | Berger Target FB bullet and 27 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2219	<<locked>>	83%	36811	89%	**64	95%
Accurate 2015	<<locked>>	88%	36318	88%	**22	97%
Accurate 2495	<<locked>>	95%	36956	89%	**23	97%
[Accurate 2520]*	<<locked>>	93%	36898	89%	**77	92%
[Accurate 4064]*	<<locked>>	97%	33083	80%	**99	93%
Alliant AR-Comp 👍	<<locked>>	92%	35969	87%	**97	99%
Alliant Reloder-10x	<<locked>>	84%	35810	87%	**38	98%
[Hodgdon H322]*	<<locked>>	88%	36100	87%	**38	94%
[Hodgdon H335]*	<<locked>>	83%	36230	88%	**31	93%
Hodgdon TrailBoss	<<locked>>	95%	29559	71%	**57	100%
IMR 3031	<<locked>>	97%	36521	88%	**07	95%
IMR 4198	<<locked>>	84%	37144	90%	**25	99%
[Lovex D073.6]*	<<locked>>	94%	36318	88%	**58	92%
[Norma 202]*	<<locked>>	92%	35955	87%	**35	93%
ReloadSwiss RS 14	<<locked>>	95%	29182	71%	**00	100%
[ReloadSwiss RS 40]*	<<locked>>	85%	35984	87%	**99	91%
[Rottweil R 901]*	<<locked>>	89%	36187	88%	**99	93%
[SNPE Vectan SP 10]*	<<locked>>	83%	37144	90%	**54	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	90%	35853	87%	**30	93%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	35984	87%	**46	94%
[Shooters World Match Rifle]*	<<locked>>	94%	36318	88%	**58	92%
[Somchem S335]*	<<locked>>	91%	36477	88%	**69	94%
Vihtavuori N130	<<locked>>	87%	36695	89%	**92	98%
Vihtavuori N133	<<locked>>	93%	36535	88%	**82	96%
[Vihtavuori N135]*	<<locked>>	96%	29602	72%	**61	93%
[Vihtavuori N140]*	<<locked>>	95%	36709	89%	**15	94%
[Vihtavuori N540]*	<<locked>>	95%	36912	89%	**51	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	34171	83%	**82	93%
[Accurate 2015]*	<<locked>>	81%	28950	70%	**22	94%
[Accurate 2495]*	<<locked>>	82%	23482	57%	**17	90%
[Accurate 2520]*	<<locked>>	89%	32924	80%	**66	90%
[Accurate 4064]*	<<locked>>	93%	29312	71%	**87	91%
[Alliant AR-Comp]*	<<locked>>	81%	25773	62%	**72	94%
Alliant Reloder-10x	<<locked>>	81%	32039	78%	**27	96%
[Hodgdon H322]*	<<locked>>	81%	28776	70%	**22	90%
[Hodgdon H335]*	<<locked>>	81%	33736	82%	**66	92%
Hodgdon TrailBoss	<<locked>>	82%	23917	58%	**09	100%
[IMR 3031]*	<<locked>>	87%	27180	66%	**15	90%
IMR 4198	<<locked>>	81%	34330	83%	**53	98%
[Lovex D073.6]*	<<locked>>	91%	32372	78%	**56	90%
[Norma 202]*	<<locked>>	88%	31111	75%	**94	91%
ReloadSwiss RS 14	<<locked>>	82%	23786	58%	**55	100%
[ReloadSwiss RS 40]*	<<locked>>	83%	33388	81%	**30	90%
[Rottweil R 901]*	<<locked>>	84%	31111	75%	**58	90%
[SNPE Vectan SP 10]*	<<locked>>	81%	34534	84%	**89	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	85%	30937	75%	**95	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	90%	28964	70%	**43	91%
[Shooters World Match Rifle]*	<<locked>>	91%	32372	78%	**56	90%
[Somchem S335]*	<<locked>>	83%	28471	69%	**49	91%
Vihtavuori N130	<<locked>>	81%	30487	74%	**25	95%
[Vihtavuori N133]*	<<locked>>	81%	25280	61%	**51	91%
[Vihtavuori N135]*	<<locked>>	91%	25483	62%	**20	90%
[Vihtavuori N140]*	<<locked>>	89%	30458	74%	**51	91%
[Vihtavuori N540]*	<<locked>>	90%	31009	75%	**77	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.