Load data for .219 Zipper + .224 | 46gr | Speer FNSP

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 46gr \| Speer FNSP
Manufacturer SKU:	1024
Bullet Weight:	46gr \| 3.0g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.483" \| 12.3mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.190" \| 4.8mm
Shank Seated Depth:	0.190" \| 4.8mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B6054_C58
Last updated:	2025-01-01

Load data for 42 loads in caliber .219 Zipper with .224 | 46gr | Speer FNSP bullet and 21 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	83%	37173	90%	**89	94%
Accurate 2015	<<locked>>	88%	37101	90%	**63	97%
Accurate 2495	<<locked>>	94%	36985	89%	**41	97%
[Accurate 4064]*	<<locked>>	97%	33982	82%	**43	93%
Alliant AR-Comp 👍	<<locked>>	92%	36854	89%	**45	99%
Alliant Reloder-10x	<<locked>>	85%	36796	89%	**86	98%
[Hodgdon H322]*	<<locked>>	88%	36506	88%	**69	94%
Hodgdon TrailBoss	<<locked>>	96%	29994	73%	**85	100%
IMR 3031	<<locked>>	95%	35868	87%	**15	95%
IMR 4198	<<locked>>	83%	36912	89%	**46	98%
[Norma 202]*	<<locked>>	92%	36100	87%	**53	93%
ReloadSwiss RS 14	<<locked>>	96%	29733	72%	**28	100%
[Rottweil R 901]*	<<locked>>	89%	36637	89%	**36	93%
[SNPE Vectan Tubal 3000]*	<<locked>>	90%	36883	89%	**77	93%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	36608	89%	**81	94%
[Somchem S335]*	<<locked>>	91%	36767	89%	**94	94%
Vihtavuori N130	<<locked>>	86%	36738	89%	**17	97%
Vihtavuori N133	<<locked>>	92%	36303	88%	**00	96%
[Vihtavuori N135]*	<<locked>>	96%	30530	74%	**05	93%
[Vihtavuori N140]*	<<locked>>	95%	37028	90%	**50	94%
[Vihtavuori N540]*	<<locked>>	94%	36564	88%	**56	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	34592	84%	**27	93%
[Accurate 2015]*	<<locked>>	81%	29762	72%	**56	94%
[Accurate 2495]*	<<locked>>	82%	24323	59%	**58	90%
[Accurate 4064]*	<<locked>>	93%	29486	71%	**05	90%
[Alliant AR-Comp]*	<<locked>>	81%	25904	63%	**87	94%
Alliant Reloder-10x	<<locked>>	81%	33040	80%	**81	96%
[Hodgdon H322]*	<<locked>>	81%	29631	72%	**69	90%
Hodgdon TrailBoss	<<locked>>	80%	23453	57%	**08	100%
[IMR 3031]*	<<locked>>	88%	28166	68%	**66	90%
IMR 4198	<<locked>>	81%	34360	83%	**84	98%
[Norma 202]*	<<locked>>	87%	31357	76%	**22	90%
ReloadSwiss RS 14	<<locked>>	80%	23308	56%	**54	100%
[Rottweil R 901]*	<<locked>>	85%	31937	77%	**99	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	85%	32169	78%	**49	91%
[SNPE Vectan Tubal 5000]*	<<locked>>	89%	28747	70%	**51	90%
[Somchem S335]*	<<locked>>	83%	29066	70%	**77	90%
Vihtavuori N130	<<locked>>	81%	30821	75%	**46	95%
[Vihtavuori N133]*	<<locked>>	81%	25701	62%	**79	91%
[Vihtavuori N135]*	<<locked>>	91%	26614	64%	**74	91%
[Vihtavuori N140]*	<<locked>>	88%	30298	73%	**46	90%
[Vihtavuori N540]*	<<locked>>	90%	32082	78%	**28	91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data