Load data for .219 Zipper + .224 | 46gr | RWS Match Jagd

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 46gr \| RWS Match Jagd
Manufacturer SKU:	2145782
Bullet Weight:	46gr \| 3.0g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.570" \| 14.5mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.210" \| 56.1mm
Seated Depth:	0.293" \| 7.4mm
Shank Seated Depth:	0.293" \| 7.4mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B5354_C58
Last updated:	2025-02-02

Load data for 42 loads in caliber .219 Zipper with .224 | 46gr | RWS Match Jagd bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	83%	35882	87%	**40	93%
Accurate 2015	<<locked>>	89%	36956	89%	**46	96%
Accurate 2495	<<locked>>	95%	37159	90%	**38	96%
Alliant AR-Comp	<<locked>>	92%	36361	88%	**15	98%
Alliant Reloder-10x	<<locked>>	86%	36782	89%	**66	97%
[Hodgdon H322]*	<<locked>>	89%	36738	89%	**69	94%
[Hodgdon H335]*	<<locked>>	84%	36637	89%	**46	92%
Hodgdon TrailBoss	<<locked>>	94%	28993	70%	**49	100%
[IMR 3031]*	<<locked>>	96%	35418	86%	**96	94%
IMR 4198	<<locked>>	83%	36172	88%	**20	98%
[Norma 202]*	<<locked>>	93%	36172	87%	**43	92%
ReloadSwiss RS 14	<<locked>>	94%	28747	70%	**95	100%
[Rottweil R 901]*	<<locked>>	90%	36695	89%	**30	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	37159	90%	**68	93%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	35723	86%	**38	93%
[Somchem S335]*	<<locked>>	92%	36840	89%	**87	94%
Vihtavuori N130	<<locked>>	87%	36085	87%	**87	97%
Vihtavuori N133	<<locked>>	94%	37173	90%	**10	96%
[Vihtavuori N135]*	<<locked>>	96%	29472	71%	**56	92%
[Vihtavuori N140]*	<<locked>>	95%	36114	87%	**04	93%
[Vihtavuori N540]*	<<locked>>	96%	36912	89%	**56	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	33460	81%	**74	92%
[Accurate 2015]*	<<locked>>	81%	28500	69%	**07	93%
[Accurate 2495]*	<<locked>>	84%	24801	60%	**64	90%
[Alliant AR-Comp]*	<<locked>>	81%	25483	62%	**54	93%
Alliant Reloder-10x	<<locked>>	81%	31488	76%	**28	95%
[Hodgdon H322]*	<<locked>>	83%	30676	74%	**82	91%
[Hodgdon H335]*	<<locked>>	81%	33040	80%	**51	91%
Hodgdon TrailBoss	<<locked>>	81%	23699	57%	**05	100%
[IMR 3031]*	<<locked>>	89%	28732	69%	**66	90%
IMR 4198	<<locked>>	81%	33707	82%	**45	97%
[Norma 202]*	<<locked>>	90%	32561	79%	**48	91%
ReloadSwiss RS 14	<<locked>>	82%	23511	57%	**47	100%
[Rottweil R 901]*	<<locked>>	87%	33011	80%	**25	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	31981	77%	**27	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	29878	72%	**74	90%
[Somchem S335]*	<<locked>>	85%	29979	73%	**94	91%
[Vihtavuori N130]*	<<locked>>	81%	30037	73%	**17	94%
[Vihtavuori N133]*	<<locked>>	82%	25860	63%	**69	90%
[Vihtavuori N135]*	<<locked>>	94%	27383	66%	**90	91%
[Vihtavuori N140]*	<<locked>>	91%	31314	76%	**76	90%
[Vihtavuori N540]*	<<locked>>	92%	32256	78%	**25	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data