Load data for .219 Zipper + .224 | 45gr | Speer Spitzer Soft Point

Recommended Powder(s): Alliant AR-Comp

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.224 \| 45gr \| Speer Spitzer Soft Point
Manufacturer SKU:	1023
Bullet Weight:	45gr \| 2.9g
Bullet Diameter:	0.224" \| 5.69mm
Bullet Length:	0.570" \| 14.5mm
Caliber:	.219 Zipper load data
Case Length (l3):	1.933" \| 49.1mm
Cartridge Length (C.O.L.):	2.226" \| 56.5mm
Seated Depth:	0.277" \| 7.0mm
Shank Seated Depth:	0.277" \| 7.0mm
Case Capacity:	34.0 Grains of Water \| 2.21 cm³
Primer Size:	Small Rifle (SR)
Max. allowed Pressure:	41336 psi \| 2850 bar
LID:	LID_B6053_C58
Last updated:	2025-01-01

Load data for 42 loads in caliber .219 Zipper with .224 | 45gr | Speer Spitzer Soft Point bullet and 21 powders such as Alliant AR-Comp. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	84%	37043	90%	**05	94%
Accurate 2015	<<locked>>	89%	36753	89%	**66	96%
Accurate 2495	<<locked>>	95%	36347	88%	**48	96%
Alliant AR-Comp 👍	<<locked>>	93%	37014	90%	**61	99%
Alliant Reloder-10x	<<locked>>	86%	36274	88%	**92	97%
[Hodgdon H322]*	<<locked>>	89%	36564	88%	**89	93%
[Hodgdon H335]*	<<locked>>	84%	36216	88%	**66	92%
Hodgdon TrailBoss	<<locked>>	97%	30095	73%	**01	100%
[IMR 3031]*	<<locked>>	97%	35665	86%	**28	94%
IMR 4198	<<locked>>	84%	36129	87%	**46	98%
[Norma 202]*	<<locked>>	93%	35911	87%	**59	92%
ReloadSwiss RS 14	<<locked>>	97%	29834	72%	**51	100%
[Rottweil R 901]*	<<locked>>	90%	36347	88%	**43	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	91%	37028	90%	**97	92%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	35346	86%	**58	93%
[Somchem S335]*	<<locked>>	92%	36637	89%	**04	93%
Vihtavuori N130	<<locked>>	88%	36477	88%	**17	97%
Vihtavuori N133	<<locked>>	94%	36143	87%	**17	96%
[Vihtavuori N135]*	<<locked>>	96%	29138	71%	**76	92%
[Vihtavuori N140]*	<<locked>>	96%	37159	90%	**63	93%
[Vihtavuori N540]*	<<locked>>	96%	36622	89%	**69	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
[ADI AR 2219]*	<<locked>>	81%	33330	81%	**94	92%
[Accurate 2015]*	<<locked>>	81%	28268	68%	**27	92%
[Accurate 2495]*	<<locked>>	85%	25556	62%	**17	90%
[Alliant AR-Comp]*	<<locked>>	81%	24758	60%	**48	92%
Alliant Reloder-10x	<<locked>>	81%	31401	76%	**51	95%
[Hodgdon H322]*	<<locked>>	83%	30443	74%	**99	90%
[Hodgdon H335]*	<<locked>>	81%	32866	80%	**68	90%
Hodgdon TrailBoss	<<locked>>	81%	23467	57%	**21	100%
[IMR 3031]*	<<locked>>	90%	29037	70%	**05	90%
IMR 4198	<<locked>>	81%	33388	81%	**64	97%
[Norma 202]*	<<locked>>	90%	32372	78%	**61	90%
ReloadSwiss RS 14	<<locked>>	81%	23221	56%	**64	100%
[Rottweil R 901]*	<<locked>>	87%	32735	79%	**41	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	33025	80%	**82	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	30777	74%	**23	91%
[Somchem S335]*	<<locked>>	85%	29704	72%	**10	90%
[Vihtavuori N130]*	<<locked>>	81%	29356	71%	**17	94%
[Vihtavuori N133]*	<<locked>>	83%	26252	63%	**05	90%
[Vihtavuori N135]*	<<locked>>	94%	27253	66%	**07	90%
[Vihtavuori N140]*	<<locked>>	92%	32329	78%	**25	91%
[Vihtavuori N540]*	<<locked>>	93%	33243	80%	**71	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data