top of page

Load data for .219 Zipper + .224 | 45gr | MEN SP

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.219 Zipper + .224 | 45gr | MEN SP

Load Specifications

Bullet:
.224 | 45gr | MEN SP
Bullet Weight:
45gr | 2.9g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.219 Zipper
Case Length (l3):
1.933" | 49.1mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.707" | 18.0mm
Shank Seated Depth:
0.707" | 18.0mm
Case Capacity:
34.0 Grains of Water | 2.21 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
41336 psi | 2850 bar
LID:
LID_B3769_C58

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 26 loads in caliber .219 Zipper with .224 | 45gr | MEN SP bullet and 13 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
85%
35984
87%
**17
99%
[Accurate 2015]*
<<locked>>
94%
35868
87%
**94
94%
Alliant AR-Comp
<<locked>>
96%
34374
83%
**17
96%
Alliant Reloder-10x
<<locked>>
91%
36535
88%
**46
96%
Alliant Reloder-7
<<locked>>
83%
36303
88%
**61
96%
[Baschieri & Pellagri 106]*
<<locked>>
88%
36753
89%
**05
93%
Hodgdon TrailBoss
<<locked>>
96%
28471
69%
**00
100%
IMR 4198
<<locked>>
89%
37101
90%
**00
97%
Norma 200
<<locked>>
88%
36695
89%
**36
97%
ReloadSwiss RS 14
<<locked>>
96%
28007
68%
**46
100%
Vihtavuori N120 👍
<<locked>>
88%
36753
89%
**00
100%
Vihtavuori N130
<<locked>>
93%
36492
88%
**64
95%
[Vihtavuori N133]*
<<locked>>
97%
33837
82%
**89
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
31531
76%
**99
98%
[Accurate 2015]*
<<locked>>
86%
27746
67%
**61
90%
[Alliant AR-Comp]*
<<locked>>
87%
25730
62%
**22
91%
[Alliant Reloder-10x]*
<<locked>>
81%
26150
63%
**25
90%
Alliant Reloder-7
<<locked>>
81%
33330
81%
**86
95%
[Baschieri & Pellagri 106]*
<<locked>>
83%
31720
77%
**71
90%
Hodgdon TrailBoss
<<locked>>
81%
22524
54%
**36
100%
[IMR 4198]*
<<locked>>
81%
28964
70%
**61
93%
[Norma 200]*
<<locked>>
81%
29776
72%
**40
94%
ReloadSwiss RS 14
<<locked>>
81%
22292
54%
**82
100%
Vihtavuori N120
<<locked>>
81%
29486
71%
**07
98%
[Vihtavuori N130]*
<<locked>>
82%
26252
64%
**66
90%
[Vihtavuori N133]*
<<locked>>
93%
30008
73%
**71
91%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page